Cable-pull encoders Cable-pull with incremental or absolute encoder Up to 50 m measuring length Features –– Absolute or incremental encoders with cable-pull –– Measuring length up to 50 m –– High linearity of typical ±0.02 % of the measuring range –– Complete assemblies of encoder and cable-pull –– Cable made of highly flexible stainless steel cores Encoder with cable-pull Technical data - cable-pull Weigth 1.1 kg 1.4 kg 1.7 kg 2.5 kg 2.7 kg 9.5 kg 10.5 kg 11 kg Distance/rev. 260.09 mm 315.07 mm 315.07 mm 315.07 mm 315.07 mm 500.00 mm 500.00 mm 500,00 mm Cable acceleration Max. 70 m/s2 Max. 50 m/s2 Max. 60 m/s2 Max. 30 m/s2 Max. 30 m/s2 Max. 20 m/s2 Max. 20 m/s2 Max. 20 m/s2 Pull-out force Max. 10 N Max. 16 N Max. 21 N Max. 21 N Max. 25 N Max. 22 N Max. 22 N Max. 24 N Pull-in force Min. 5.5 N Min. 4 N Min. 8.5 N Min. 5.5 N Min. 5 N Min. 12 N Min. 11 N Min. 11 N Cable ø 0.8 mm 1.0 mm 1.0 mm 1.0 mm 1.0 mm 0.8 mm 0.8 mm 0.8 mm Linearity ±0.02% ±0.02% ±0.02% ±0.01% ±0.01% ±0.01% ±0.01% ±0.01% Encoders with cable-pulls <3000 mm lenght upon request. Technical encoder data: See encoder product sheet. 1 www.baumer.com/motion Subject to modification in technic and design. Errors and omissions excepted. Length 3000 mm 5000 mm 7500 mm 10000 mm 15000 mm 30000 mm 40000 mm 50000 mm Housing: Aluminium Cable: Stainless steel, polyamide-coated -20...+80 °C IP 50 (cable-pull) 3000 mm: 5 million strokes 5000...50000 mm: 1 million strokes 22.04.2014 Materials Operating temperature Protection per IEC60529 Service life approx. Cable-pull encoders Cable-pull with incremental or absolute encoder Up to 50 m measuring length Ordering part number The respective ordering part number of encoder with cablepull assembly is defined after receipt of order. Example: GM401.E26 = encoder GM401.120A102 (SSI, gray code, 12x12 bit, 10...30 VDC) with cable-pull assembly, 15000 mm cable length. Accessories Z 119.060 Snap hook for cable-pulls of 3000 mm length 6 M4 41 8 open/close 7 The appropriate encoder for system solutions All current encoder designs with 58 mm housing offered in our wide range on absolute and incremental encoders are compatible to the cable-pull of your choice. Idler for cable thickness 0.8...1 mm ø33 4 Absolute encoders – Single or multiturn – Resolution max. 36 bit – Rotation speeds up to 10.000 rpm – Extremely high mechanical immunity against shock 2000 m/s2, vibrations 100 m/s2 – Capable of extreme temperatures -20...+85 °C – Programmable 4 14 5 7.5 60° 24 ø4.3 11.5 Z 119.067 These absolute encoders can be varied with all current fieldbus interfaces: Idler for cable thickness max. 0.5 mm 22 SAE J1939 ø 21 4 30 22 ø 17 6.5 4 11.5 1.6 14 20 60° ø4.3 2 www.baumer.com/motion Subject to modification in technic and design. Errors and omissions excepted. Incremental encoders – Impulse numbers up to 80.000 – Rotation speeds up to 10.000 rpm – Supply voltage 5 VDC or 4.75...30 VDC – Capable of extreme temperatures -20...+100 °C 24 30 ø28.8 22.04.2014 Z 119.065 0.9 Cable-pull encoders Cable-pull with incremental or absolute encoder Up to 50 m measuring length Dimensions Measuring length 3000 mm Lengthx 300041.4 10 28 12 12 M4 x ø13 5° 5° for hollow shaft encoders ø12 mm 70 ø12h8 96 ø73 ø68 M4 x 6 (4x) M3 x 6 (4x) 70 96 M6 M6 36 56 24 2 mounting rails with thread M6 are included in delivery LengthA 500028 750037 1000044,5 1500061 A ø20.2 4 ø4.3 (3x) B 82.5 105.5 148.5 180.5 Plug-in coupling for encoders with 6 mm shaft ø50 ø58 ø6H7 +0.05 60 115 144 ) (3x 0° 12 60 4 ø42 ±0.1 36 B 2 mounting rails with thread M6 are included in delivery 3 10.5±0.5 21.2 www.baumer.com/motion 22.04.2014 Measuring length 5000, 7500, 10000 or 15000 mm 50 ø30 Subject to modification in technic and design. Errors and omissions excepted. Dimensions Cable-pull encoders Cable-pull with incremental or absolute encoder Up to 50 m measuring length Dimensions Measuring length 30000, 40000 and 50000 mm ¡ LengthA 3000075 4000095 5000095 $ ¡ Plug-in coupling ¡ ¡ ¡ ¡ [ % Slot closers for slot nut with thread M8 Subject to modification in technic and design. Errors and omissions excepted. 4 www.baumer.com/motion 22.04.2014 PD[ Screw 4x6 DIN912 (4x) with serrated washer B 268 300 333.5