End of Life; Not Recommended for New Designs MPD, MPDA www.vishay.com Vishay Dale Thin Film Molded, SOT-143 Thin Film Resistor, Surface Mount Network FEATURES • • • • • Actual Size Vishay Dale Thin Film MPD series dividers provide ± 2 ppm/°C tracking and a ratio tolerance as tight as ± 0.05 %, small size, and exceptional stability for all surface mount applications. The standard SOT-143 package format with unity and common standard resistance divider ratios provide easy selection for most applications requiring matched pair resistor elements. The ratios listed are available for off the shelf convenience, if you require a non-standard ratio, consult the applications engineering group as we may be able to meet your requirements. Tight ratio tolerances to 0.05 % ± 2 ppm tracking Standard values stocked Standard JEDEC® TO-253 package Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL PERFORMANCE ABSOLUTE TCR 4 R1 3 (R1 ref) R1 R2 1 2 MPD R2 2 ABSOLUTE RATIO 0.1 0.05 STANDARD VALUES MODEL R3 1 2 TRACKING 25 TOL. 3 Available Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. SCHEMATIC 4 Available MPD MPDA MPDA R1 (Ω) 100K 50K 25K 20K 10K 5K 2K 1K 10K R2 (Ω) 100K 50K 25K 20K 10K 5K 2K 1K 10K R3 (Ω) 10K STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS Material Passivated nichrome Pin/Lead Number 4 Resistance Range 1000 Ω to 100 kΩ per resistor TCR: Absolute ± 25 ppm/°C TCR: Tracking ± 2 ppm/°C (typical) Tolerance: Absolute ± 0.1 % to ± 1.0 % Tolerance: Ratio ± 0.05 % to ± 0.5 % Power Rating: Resistor 100 mW Power Rating: Package 200 mW Stability: Absolute ΔR ± 0.05 % Stability: Ratio ΔR ± 0.015 % Voltage Coefficient 0.1 ppm/V Working Voltage 100 V max. not to exceed P x R Operating Temperature Range -55 °C to +125 °C Storage Temperature Range -55 °C to +150 °C Noise < -25 dB Thermal EMF 0.2 μV/°C Shelf Life Stability: Absolute ΔR ± 0.01 % Shelf Life Stability: Ratio ΔR ± 0.002 % Note • Tantalum nitride film is available on special orders Revision: 01-Apr-15 CONDITIONS -55 °C to +125 °C -55 °C to +125 °C +25 °C +25 °C Maximum at +70 °C Maximum at +70 °C 2000 h at +70 °C 2000 h at +70 °C 1 year at +25 °C 1 year at +25 °C Document Number: 60016 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life; Not Recommended for New Designs MPD, MPDA www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in millimeters DIMENSION A A1 A2 b b1 b2 b3 c c1 D E E1 e e1 L L1 N Ø D e e2 A A2 Seating Plane b2 E1 E A1 B 3xb e1 See View C Ø L L1 b1 b3 With Plating VIEW C 0.25 Gauge Plane Seating Plane c c1 Base Metal (b) (b2) MECHANICAL SPECIFICATIONS Substrate Material Silicon 0" MAX. 1.22 0.15 1.07 0.50 0.45 0.89 0.84 0.20 0.16 3.04 2.64 1.40 0.60 8" 100 Molded epoxy Copper alloy Lead (Pb)-Free Option 0.40 Precent of Rated Power Passivated nichrome Terminals NOM. 0.90 0.40 0.80 0.10 2.90 1.30 1.92 BSC 0.20 BSC 0.50 0.54 REF. 4 - DERATING CURVE Resistive Element Body MIN. 0.80 0.05 0.75 0.30 0.30 0.76 0.76 0.08 0.08 2.80 2.10 1.20 100 % matte tin Tin Lead Option Sn85 Tin Lead and Lead (Pb)-Free Finish Plated 100 % = 0.20 W 80 60 40 20 0 0 70 125 150 Ambient Temperature °C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MPD1003AWS M M P D 1 0 0 3 A W S P D T 2 0 0 1 A T 1 GLOBAL MODEL (3 or 4 digits) RESISTANCE (4 or 8 digits) MPD (Two resistors, tin lead) MPDT (Two resistors, lead (Pb)-free) (e3) The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. When like values are required use total resistance. Example: 1002 = 10K (5K / 5K) 1003 = 100K (50K / 50K) TOLERANCE AND RATIO TOLERANCE Abs. Tol. Ratio A = ± 0.1 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F=±1% ± 0.05 % ± 0.1 % ± 0.1 % ± 0.1 % ± 0.5 % PACKAGING BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult TAPE AND REEL T1 = 1000 min., 1000 mult (1) Historical Part Number example: MPD1002BW (for reference purposes only) MPD 1002 B W SERIES RESISTANCE TOLERANCE AND RATIO TOLERANCE PACKAGING Note (1) Preferred packaging code Revision: 01-Apr-15 Document Number: 60016 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life; Not Recommended for New Designs MPD, MPDA www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MPDAT3002AWS M P D A 3 0 0 2 A W S P D A T 3 0 0 2 A W S M GLOBAL MODEL (4 or 5 digits) MPDA (Three equal series resistors, tin / lead) MPDAT (Three equal series resistors, lead (Pb)-free) (e3) RESISTANCE First 3 digits are significant figures and the last digit specifies the number of zeros to follow. When like values are required use total resistance. Example: 3002 = three 10 kΩ resistors TOLERANCE AND RATIO TOLERANCE Abs. Tol. Ratio A = ± 0.1 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F=±1% ± 0.05 % ± 0.1 % ± 0.1 % ± 0.1 % ± 0.5 % PACKAGING BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult TAPE AND REEL T1 = 1000 min., 1000 mult (1) Historical Part Number Example: MPDA3002BT (for reference purposes only) MPDA 3002 B T SERIES RESISTANCE TOLERANCE AND RATIO TOLERANCE PACKAGING Note (1) Preferred packaging code Revision: 01-Apr-15 Document Number: 60016 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000