Vision sensors ID-105 VS ID105M03I10RP Article number: 11144196 features User management Password protection Backup & Restore function resolution 752 × 480 px height 107,5 mm sensor type 1/3” CMOS, monochrome depth 38 mm LED class free group (risk free, EN 62471:2008) material high-resolution mode max. 50 inspections per second housing: stainless steel 1.4404 cover glass: PMMA, integrated daylight filter (780 nm) object distance min. 50 mm weight ≤ 700 g number of jobs (products) ≤ 255 features per job 32 defect image memory 32 signal processing Baumer FEX 3.5 illumination integrated, LED infrared (860 nm) lens 10 mm environmental conditions ® electrical data voltage supply range +Vs 18 ... 30 V DC power consumption typical 5 W (I = 1 A at 24 V) digital inputs 5 inputs (8 … 30 V) trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz digital outputs 3 outputs (PNP) Pass / Fail Flash Sync Alarm Camera Ready Output Enable initial setup Ethernet (10BASE-T / 100BASE-TX) process interface TCP|UDP (Ethernet) / RS485 (supports VeriSens Gateways) max ® visualization operating temperature +5 … +50 °C storage temperature -20 … +70 °C case temperature max. +50 °C humidity 0 … 90 % (non-condensing) protection class IP 69K vibration load IEC 60068-2-6 IEC 60068-2-64 mechanical shock resistance EN 60068-2-27 code types barcode 2/5 Industrial 2/5 Interleaved Codabar Code 39 Code 93 Code 128 PharmaCode EAN 8 EAN 13 UPC-A UPC-E GS1 DataBar GS1 128 matrix code DataMatrix (ECC 200) GS1-DataMatrix QR-Code PDF417 web interface mechanical data 53 mm EN / 100516 width The product characteristics and technical data provided do not express or imply any warranty. Technical modifications and errors reserved. mechanical data general data www.baumer.com Data sheet VS ID105M03I10RP page 1 / 2 Vision sensors ID-105 VS ID105M03I10RP Article number: 11144196 feature checks identification barcode matrix code electrical connection M12 / 12-pin (on device) 7 6 8 9 12 11 5 1 4 10 2 3 1: PWR (+18-30 V DC) 7: OUT3 2: Ground 8: IN3 3: IN1 (Trigger) 9: RS485+ 4: OUT1 10: IN4 5: IN2 11: IN5 6: OUT2 12: RS485- 3 4 2 1 1: TD+ 3: TD- 2: RD+ 4: RD- The product characteristics and technical data provided do not express or imply any warranty. Technical modifications and errors reserved. Ethernet connection M12 / 4-pin (on device) dimension drawing 120,5 99,5 40 4x M4 /4 28,5 4,5 40 R EN / 100516 1 3,5 38 51 53 www.baumer.com Data sheet VS ID105M03I10RP page 2 / 2