Vision sensors ID-110 VS ID110M03W10EP Article number: 11048484 features User management Password protection Backup & Restore function 752 × 480 px depth 38 mm sensor type 1/3” CMOS, monochrome material LED class risk group 1 (low risk, EN 62471:2008) housing: aluminum cover glass: PMMA weight ≤ 250 g high-resolution mode max. 50 inspections per second object distance min. 50 mm operating temperature +5 … +50 °C number of jobs (products) ≤ 255 storage temperature -20 … +70 °C features per job 32 case temperature max. +50 °C defect image memory 32 humidity 0 … 90 % (non-condensing) signal processing Baumer FEX 3.5 protection class IP 67 illumination integrated, LED white vibration load lens 10 mm IEC 60068-2-6 IEC 60068-2-64 mechanical shock resistance EN 60068-2-27 ® electrical data code types voltage supply range +Vs 18 ... 30 V DC power consumption typical 5 W (I = 1 A at 24 V) digital inputs 5 inputs (8 … 30 V) trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz digital outputs 5 outputs (PNP) Pass / Fail Flash Sync Alarm Camera Ready Output Enable initial setup Ethernet (10BASE-T / 100BASE-TX) process interface TCP|UDP (Ethernet) visualization web interface barcode 2/5 Industrial 2/5 Interleaved Codabar Code 39 Code 93 Code 128 PharmaCode EAN 8 EAN 13 UPC-A UPC-E GS1 DataBar GS1 128 matrix code DataMatrix (ECC 200) GS1-DataMatrix QR-Code PDF417 font many font styles (recommended: sans serif, proportional) Dot Matrix characters: A-Z a-z 0-9 + - . : / ( ) max mechanical data width 53 mm height 99,5 mm www.baumer.com environmental conditions Data sheet VS ID110M03W10EP page 1 / 2 EN / 100516 resolution The product characteristics and technical data provided do not express or imply any warranty. Technical modifications and errors reserved. mechanical data general data Vision sensors ID-110 VS ID110M03W10EP Article number: 11048484 feature checks part location part location on text line feature comparison contour comparison identification barcode matrix code text electrical connection M12 / 12-pin (on device) 7 6 8 9 12 11 5 1 4 10 2 3 1: PWR (+18-30 V DC) 7: OUT3 2: Ground 8: IN3 3: IN1 (Trigger) 9: OUT4 4: OUT1 10: IN4 5: IN2 11: IN5 6: OUT2 12: OUT5 3 4 2 1 1: TD+ 3: TD- 2: RD+ 4: RD- The product characteristics and technical data provided do not express or imply any warranty. Technical modifications and errors reserved. Ethernet connection M12 / 4-pin (on device) dimension drawing 112,9 99,5+0,6 40 53+0,6 EN / 100516 38 51 4x M4 /4 28,5 40 www.baumer.com Data sheet VS ID110M03W10EP page 2 / 2