TRC www.vishay.com Vishay Techno Thick Film Resistor/Capacitor Networks, Single-In-Line, Conformal Coated SIP FEATURES • Isolated and bussed schematics available • Thick film resistors • NP0 or X7R capacitors for line terminator • Wide operating temperature range (- 55 °C to 125 °C) • Custom Resistor/Capacitor schematics available • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. STANDARD ELECTRICAL SPECIFICATIONS RESISTOR CHARACTERISTICS MODEL CAPACITOR CHARACTERISTICS SCHEMATIC POWER RATING P70 °C W RESISTANCE RANGE 01 0.20 10 to 1M 1, 2, 5 150 02 0.20 10 to 1M 1, 2, 5 150 09 0.20 10 to 1M 1, 2, 5 150 TRC RESISTANCE TEMP. TOLERANCE (1) COEFF. TYPE (2) ±% ± ppm/°C CAPACITANCE RANGE CAPACITANCE CAPACITANCE TOLERANCE (3) VOLTAGE ±% VDC NP0 33 pF to 3900 pF 10, 20 X7R 470 pF to 0.1 μF 10, 20 NP0 33 pF to 3900 pF 10, 20 X7R 470 pF to 0.1 μF 10, 20 NP0 33 pF to 3900 pF 10, 20 X7R 470 pF to 0.1 μF 10, 20 50 50 50 Notes ± 2 % standard, ± 1 % and ± 5 % available (2) NP0 capacitors may be substituted for X7R capacitors (3) Tighter tolerances available on request (1) GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TRC0801N101J560KTB (preferred part number format) T R C 0 8 0 1 N 1 0 1 J 5 6 0 K T B GLOBAL PIN RESISTANCE RESISTANCE CAPACITANCE CAPACITANCE TERMINAL SCHEMATIC CHARACTERISTICS PACKAGING MODEL COUNT VALUE TOLERANCE VALUE TOLERANCE FINISH TRC 01 02 09 06 to 12 pin available 06 = 6 pin 08 = 8 pin 12 = 12 pin N = NP0 X = X7R 2 digit significant figure, followed by a multiplier 101 = 100 220 = 22 102 = 1 k F=1% G=2% J=5% (In picofarads) 2 digit significant figure, followed by a multiplier 101 = 100 pF 392 = 3000 pF 104 = 0.1 μF K = 10 % M = 20 % T= Sn90/Pb10 C= Sn95.5/ Ag3.9/ Cu0.6 B = Bulk Historical Part Numbering: TRC0801101J560KS10 (will continue to be accepted) TRC 08 HISTORICAL MODEL PIN COUNT 01 101 J 560 K S10 SCHEMATIC RESISTANCE VALUE RESISTANCE TOLERANCE CAPACITANCE VALUE CAPACITANCE TOLERANCE TERMINAL FINISH Notes • For additional information on packaging, refer to the Through-hole Network Packaging document (www.vishay.com/doc?31542). Revision: 23-Jan-13 Document Number: 68007 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TRC www.vishay.com Vishay Techno SCHEMATICS SCHEMATIC 01 SCHEMATIC 02 1 1 2 3 4 n-1 2 3 SCHEMATIC 09 4 n-1 n 1 n 2 3 4 n-1 n Note • Custom schematics available DIMENSIONS in inches (millimeters) 0.130 (3.30) Max. A Max. C Max. Pin #1 Identifier Seating Plane 0.125 ± 0.015 (3.18 ± 0.381) 0.020 ± 0.002 (0.508 ± 0.051) 0.100 ± 0.005 (2.54 ± 0.127) Non-Cumulative B 0.010 ± 0.002 (0.254 ± 0.051) A (Max.) B ± 0.005 (0.127) C (Max.) 6 0.590 (14.99) 0.500 (12.70) 0.350 (8.89) 7 0.690 (17.53) 0.600 (15.24) 0.350 (8.89) 8 0.790 (20.07) 0.700 (17.78) 0.350 (8.89) 9 0.890 (22.61) 0.800 (20.32) 0.350 (8.89) 10 0.990 (25.15) 0.900 (22.86) 0.350 (8.89) 11 1.09 (27.69) 1.00 (25.40) 0.350 (8.89) 12 1.19 (30.23) 1.10 (27.94) 0.350 (8.89) NUMBER OF PINS Note • Other sizes available Revision: 23-Jan-13 Document Number: 68007 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000