VTSRC20-AB, VSSRC20-AB, VSORC20-AB www.vishay.com Vishay Dale Thin Film 25 mil or 50 mil Pitch, Termination Thin Film Surface Mount Resistor/Capacitor Network FEATURES • Resistors and capacitors on a single chip • Saves board space • Reduces total assembly costs • Uniform performance characteristics Actual Size • Compatible with automatic surface mounting equipment Small outline, surface mount, EMI/RFI reduction • UL 94 V-0 flame resistant If your design calls for the elimination of transmission line effects on high speed data lines Vishay Thin Film’s integrated RC network, schematic AB is the answer. The planar design of our single die thin film networks offer low noise and predictable component behavior over a wide frequency range. Care must be taken when choosing matching networks that their frequency response matches that of the transmission line. Our product will reduce total assembly costs through surface mount technology, reduced component count and improved performance characteristics. Available packages SOIC, SSOP and TSSOP. • Rugged, molded case construction • Compliant to RoHS Directive 2002/95/EC TYPICAL PERFORMANCE RESISTOR CAPACITOR 19 18 TOL. 200 10 TCC TOL. 200 20 STANDARD VALUES SCHEMATIC AB 20 TCR 17 16 15 14 13 12 MODELS 11 VSORC VSSRC R () C (pF) 47 33 VTSRC X 1 2 3 4 5 6 7 8 9 10 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number SPECIFICATIONS CONDITIONS Tantalum nitride on silicon - 20 - Resistance Range 10 to 750 - TCR: Absolute ± 200 ppm/°C 0 °C to + 70 °C TCR: Tracking Tolerance: Absolute Power Rating: Resistor Power Rating: Package Stability: Ratio Operating Temperature Range Storage Temperature Range Capacitance Range ESD Protection Breakdown Voltage Revision: 08-Sep-2011 ± 10 ppm/°C - ± 10 % standard (R), ± 20 % standard (C) At 1 MHz and VRMS over + 10 °C to + 70 °C 100 mW - (T)SSOP: 1 W SOIC: 1.2 W ±2% See derating curve 1000 h at + 70 °C 0 °C to + 70 °C - - 55 °C to + 125 °C - 10 pF to 150 pF for TSSOP 10 pF to 250 pF for SOIC/SSOP - > 2 kV MIL-STD-883, method 3015 35 V to 50 V - 1 Document Number: 60084 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTSRC20-AB, VSSRC20-AB, VSORC20-AB www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches and millimeters B C Model RES/CAP Date Code E x x x x x xxx/xxx x xx x H F G Pin #1 A J W D DIMENSION JEDEC M0-153AC, VTSRC20-AB JEDEC M0-137AD, VSSRC20-AB JEDEC MS-013AC, VSORC20-AB INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS A 0.256 ± 0.003 6.5 ± 0.08 0.344 max. 8.74 max. 0.500 ± 0.010 12.7 ± 0.25 B (ref.) 0.025 0.65 0.025 0.64 0.050 1.27 C (ref.) 0.0087 0.22 0.010 0.25 0.016 0.41 D 0.004 0.10 0.006 0.15 0.008 0.20 E (typ.) 0.024 0.61 0.025 0.64 0.030 0.76 F 0.173 ± 0.003 4.39 ± 0.08 0.154 ± 0.003 3.9 0.293 ± 0.003 7.44 G 0.015 x 45° 0.38 0.015 x 45° 0.38 0.025 x 45° 0.64 H 0.252 ± 0.005 6.4 ± 0.13 0.236 ± 0.008 6.0 ± 0.20 0.406 ± 0.005 10.31 J (ref.) 0.005 0.13 0.010 0.25 0.010 0.25 W 0.043 ± 0.005 1.09 ± 0.13 0.064 ± 0.005 1.6 0.100 ± 0.005 2.59 IMPRINTING VSORC, VSSRC, VTSRC 20 AB XXX / XXX MODEL PIN COUNT SCHEMATIC RESISTANCE Code: e.g. 100 = 10 W / CAPACITANCE Code: e.g. 101 = 100 pF XXXX Date code Resistive Element Tantalum nitride Substrate Material Silicon Body Molded epoxy Terminals Copper alloy Plating 100 % matte Sn Lead Coplanarity Marking Resistance to Solvents DERATING CURVE Precent of Rated Power MECHANICAL SPECIFICATIONS Optional marking 0.0005" 100 80 60 40 20 0 - 50 Permanency testing per MIL-STD-202, method 215 0 25 70 125 150 Ambient Temperature °C PACKAGING INFORMATION MODEL LEADS TAPE AND REEL TUBES JEDEC M0-153AC, VTSRC (TSSOP) 20 2500 74 JEDEC M0-137AD, VSSRC (SSOP) 20 2500 55 JEDEC MS-013AC, VSORC (SOIC) 20 1000 38 Revision: 08-Sep-2011 2 Document Number: 60084 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTSRC20-AB, VSSRC20-AB, VSORC20-AB www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VSORC20AB330470TF V S O R C GLOBAL MODEL VSORC VTSRC VSSRC 2 0 A B 3 3 0 4 7 0 T NUMBER OF LEADS/ SCHEMATICS RESISTANCE AND TOLERANCE/ CAPACITANCE AND TOLERANCE 20AB xxxyyy UF = TUBED First 2 digits are significant figures. Last digit specifies number of zeros to follow. TAPE AND REEL TF = Full reels F PACKAGING K = 10 % resistance tol. fixed M = 20 % capacitor tol. fixed Historical Part Number Example: VSORC20AB330K470MT/R (for reference purposes only) VSORC 20 AB 330K 470M T/R MODEL NUMBER OF LEADS SCHEMATIC RESISTANCE TOLERANCE PACKAGING Revision: 08-Sep-2011 3 Document Number: 60084 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000