TCST1230 www.vishay.com Vishay Semiconductors Transmissive Optical Sensor with Phototransistor Output FEATURES • Package type: leaded Top view A • Detector type: phototransistor E • Dimensions (L x W x H in mm): 9.2 x 4.8 x 5.4 • Gap (in mm): 2.8 C • Aperture (in mm): 0.5 C 21833 • Typical output current under test: IC = 2 mA 19205_1 • Daylight blocking filter • Emitter wavelength: 950 nm DESCRIPTION • Lead (Pb)-free soldering released The TCST1230 is a transmissive sensor that includes an infrared emitter and phototransistor, located face-to-face on the optical axes in a leaded package which blocks visible light. • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Optical switch • Shaft encoder • Detection of opaque material such as paper • Detection of magnetic tapes PRODUCT SUMMARY PART NUMBER TCST1230 GAP WIDTH (mm) APERTURE WIDTH (mm) TYPICAL OUTPUT CURRENT UNDER TEST (1) (mA) DAYLIGHT BLOCKING FILTER INTEGRATED 2.8 0.5 2 Yes Note • Conditions like in table basic characteristics/coupler ORDERING INFORMATION ORDERING CODE TCST1230 PACKAGING VOLUME (1) REMARKS Tube MOQ: 4800 pcs, 60 pcs/tube - Note • MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT mW COUPLER Total power dissipation Tamb ≤ 25 °C Ptot 250 Ambient temperature range Tamb - 25 to + 85 °C Storage temperature range Tstg - 40 to + 100 °C Tsd 260 °C Soldering temperature Distance to package 1.6 mm, t ≤ 5 s INPUT (EMITTER) Reverse voltage VR 6 V Forward current IF 60 mA Forward surge current Power dissipation Junction temperature tp ≤ 10 μs IFSM 3 A Tamb ≤ 25 °C PV 100 mW Tj 100 °C Document Number: 83765 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.0, 21-Sep-12 TCST1230 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Collector emitter voltage VCEO 70 V Emitter collector voltage VECO 7 V OUTPUT (DETECTOR) Collector current Tamb ≤ 25 °C Power dissipation Junction temperature IC 100 mA PV 150 mW Tj 100 °C ABSOLUTE MAXIMUM RATINGS P - Power Dissipation (mW) 400 300 Coupled device 200 Phototransistor IR-diode 100 0 30 0 95 11088 60 90 120 150 Tamb - Ambient Temperature (°C) Fig. 1 - Power Dissipation Limit vs. Ambient Temperature BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. Collector current VCE = 10 V, IF = 20 mA IC 0.5 Collector emitter saturation voltage IF = 20 mA, IC = 0.2 mA VCEsat TYP. MAX. UNIT 14 mA 0.4 V COUPLER INPUT (EMITTER) Forward voltage Junction capacitance IF = 60 mA VF 1.25 VR = 0 V, f = 1 MHz Cj 50 IC = 1 mA VCEO 70 7 1.5 V pF OUTPUT (DETECTOR) Collector emitter voltage Emitter collector voltage V IE = 10 μA VECO VCE = 25 V, IF = 0 A, E = 0 lx ICEO 10 Turn-on time IC = 1 mA, VCE = 5 V, RL = 100 Ω (see figure 2) ton 15 μs Turn-off time IC = 1 mA, VCE = 5 V, RL = 100 Ω (see figure 2) toff 10 μs Collector dark current V 100 nA SWITCHING CHARACTERISTICS Document Number: 83765 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.0, 21-Sep-12 TCST1230 www.vishay.com Vishay Semiconductors IF 0 +5V IF IF 0 IC = 1 mA; adjusted by I F tp IC t 100 % 90 % RG = 50 Ω tp = 0.01 T t p = 50 µs Channel I tr R L ≥ 1 MΩ CL ≤ 20 pF Channel II 50 Ω 10 % 0 Oscilloscope 100 Ω td tp td tr t on (= td + tr) 20223 ts t on ts tf t off (= ts + tf) Pulse duration Delay time Rise time Turn-on time Fig. 2 - Test Circuit for ton and toff t tf t off Storage time Fall time Turn-off time 96 11698 Fig. 3 - Switching Times BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10 000 ICEO - Collector Dark Current (nA) IF - Forward Current (mA) 1000 100 10 1 100 10 1 0.1 0 0.4 0.8 1.2 1.6 2.0 VF - Forward Voltage (V) 96 11862 25 50 75 Tamb - Ambient Temperature (°C) 0 95 11090 Fig. 4 - Forward Current vs. Forward Voltage 100 Fig. 6 - Collector Dark Current vs. Ambient Temperature 10 2.0 VCE = 10 V VCE = 5 V I F = 20 mA I C - Collector Current (mA) CTR rel - Relative Current Transfer Ratio VCE = 25 V IF = 0 A 1000 1.5 1.0 0.5 0 - 25 95 11089 0 25 50 75 100 Tamb - Ambient Temperature (°C) Fig. 5 - Relative Current Transfer Ratio vs. Ambient Temperature 1 0.1 0.01 0.001 0.1 95 11083 1 10 100 I F - Forward Current (mA) Fig. 7 - Collector Current vs. Forward Current Document Number: 83765 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.0, 21-Sep-12 TCST1230 www.vishay.com Vishay Semiconductors 110 I Crel - Relative Collector Current I C - Collector Current (mA) 10 I F = 50 mA 1 20 mA 10 mA 0.1 5 mA 2 mA 0.01 0.1 1 10 100 VCE - Collector Emitter Voltage (V) 95 11084 100 A = 0.5 mm 90 80 70 s 60 50 40 30 20 10 0 - 0.5 - 0.4 - 0.3 - 0.2 - 0.1 0 96 12006 Fig. 8 - Collector Current vs. Collector Emitter Voltage 0 0.1 0.2 0.3 0.4 0.5 s - Displacement (mm) Fig. 11 - Relative Collector Current vs. Displacement CTR - Current Transfer Ratio (%) 100 VCE = 5 V 10 1 0.1 0 0.1 100 10 I F - Forward Current (mA) 95 11085 Fig. 9 - Current Transfer Ratio vs. Forward Current ton / t off - Turn on/Turn off Time (µs) 20 Non saturated operation VS = 5 V R L = 100 Ω 15 10 t on 5 t off 0 0 95 11086 2 4 6 8 10 I C - Collector Current (mA) Fig. 10 - Turn-on/Turn-off Time vs. Collector Current Document Number: 83765 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.0, 21-Sep-12 TCST1230 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 96 12083 TUBE DIMENSIONS in millimeters 20256 Document Number: 83765 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.0, 21-Sep-12 Packaging and Ordering Information Vishay Semiconductors Packaging and Ordering Information PART NUMBER MOQ (1) PCS PER TUBE TUBE SPEC. (FIGURE) CONSTITUENTS (FORMS) CNY70 4000 80 1 28 TCPT1300X01 2000 Reel (2) 29 TCRT1000 1000 Bulk - 26 TCRT1010 1000 Bulk - 26 TCRT5000 4500 50 2 27 TCRT5000L 2400 48 3 27 TCST1030 5200 65 5 24 TCST1030L 2600 65 6 24 TCST1103 1020 85 4 24 TCST1202 1020 85 4 24 TCST1230 4800 60 7 24 TCST1300 1020 85 4 24 TCST2103 1020 85 4 24 TCST2202 1020 85 4 24 TCST2300 1020 85 4 24 TCST5250 4860 30 8 24 TCUT1300X01 2000 Reel (2) 29 TCZT8020-PAER 2500 Bulk - 22 Notes (1) MOQ: minimum order quantity (2) Please refer to datasheets TUBE SPECIFICATION FIGURES 15198 Fig. 1 Document Number: 80112 Rev. 1.1, 02-Jul-09 For technical questions, contact: [email protected] www.vishay.com 1 Packaging and Ordering Information Vishay Semiconductors Packaging and Ordering Information 15210 Fig. 2 15201 Fig. 3 www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 80112 Rev. 1.1, 02-Jul-09 Packaging and Ordering Information Packaging and Ordering Information Vishay Semiconductors 15199 Fig. 4 15202 Fig. 5 Document Number: 80112 Rev. 1.1, 02-Jul-09 For technical questions, contact: [email protected] www.vishay.com 3 Packaging and Ordering Information Vishay Semiconductors Packaging and Ordering Information 15196 Fig. 6 15195 Fig. 7 www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 80112 Rev. 1.1, 02-Jul-09 Packaging and Ordering Information Packaging and Ordering Information Vishay Semiconductors 20257 Fig. 8 Document Number: 80112 Rev. 1.1, 02-Jul-09 For technical questions, contact: [email protected] www.vishay.com 5 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000