TCPT1300X01 www.vishay.com Vishay Semiconductors Subminiature Transmissive Optical Sensor with Transistor Output FEATURES • Package type: surface mount Pin connection Top view • Detector type: phototransistor • Dimensions (L x W x H in mm): 5.5 x 4 x 4 Cath. E NC Coll. • AEC-Q101 qualified NC • Gap (in mm): 3 A • Aperture (in mm): 0.3 • Typical output current under test: IC = 0.6 mA 19601 21848 • Emitter wavelength: 950 nm • Moisture sensitivity level (MSL): 1 DESCRIPTION The TCPT1300X01 is a compact transmissive sensor that includes an infrared emitter and a phototransistor detector, located face-to-face in a surface mount package. • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC Note ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 APPLICATIONS • Automotive optical sensors • Accurate position sensor for encoder • Detection of motion speed PRODUCT SUMMARY PART NUMBER TCPT1300X01 GAP WIDTH (mm) APERTURE WIDTH (mm) TYPICAL OUTPUT CURRENT UNDER TEST (1) (mA) DAYLIGHT BLOCKING FILTER INTEGRATED 3 0.3 0.6 No Note • Conditions like in table basic characteristics/coupler ORDERING INFORMATION ORDERING CODE PACKAGING VOLUME (1) REMARKS TCPT1300X01 Tape and reel MOQ: 2000 pcs, 2000 pcs/reel Drypack, MSL 1 Note • MOQ: minimum order quantity Document Number: 84778 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.9, 04-Oct-11 TCPT1300X01 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Tamb ≤ 95 °C Ptot 37.5 mW Tj 110 °C Ambient temperature range Tamb - 40 to + 105 °C Storage temperature range Tstg - 40 to + 125 °C Tsd 260 °C COUPLER Total power dissipation Junction temperature Soldering temperature In accordance with fig. 16 INPUT (EMITTER) Reverse voltage VR 5 V Tamb ≤ 95 °C IF 25 mA tp ≤ 10 μs IFSM 200 mA Tamb ≤ 95 °C PV 37.5 mW Collector emitter voltage VCEO 20 V Emitter collector voltage VECO 7 V IC 20 mA ICEO 3.3 μA Forward current Forward surge current Power dissipation OUTPUT (DETECTOR) Collector current Tamb = 85 °C, VCE = 5 V Collector dark current ABSOLUTE MAXIMUM RATINGS 30 35 IF - Forward Current (mA) PV - Power Dissipation (mW) 40 30 25 RthJA = 460 K/W 20 15 10 25 20 15 RthJA = 460 K/W 10 5 5 0 0 0 22460 20 40 60 80 100 0 120 Tamb - Ambient Temperature (°C) Fig. 1 - Power Dissipation Limit vs. Ambient Temperature 22461 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 2 - Forward Current Limit vs. Ambient Temperature Document Number: 84778 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.9, 04-Oct-11 TCPT1300X01 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. VCE = 5 V, IF = 15 mA IC 300 600 IF = 15 mA, IC = 0.05 mA VCEsat Forward voltage IF = 15 mA VF Reverse current VR = 5 V IR VR = 0 V, f = 1 MHz Cj MAX. UNIT COUPLER Collector current Collector emitter saturation voltage μA 0.4 V INPUT (EMITTER) Junction capacitance 1 1.2 1.4 V 10 μA 25 pF OUTPUT (DETECTOR) Collector emitter voltage IC IC = 1 mA VCEO 20 V IE = 100 μA VECO 7 V VCE = 25 V, IF = 0 A, E = 0 lx ICEO 1 100 nA Rise time IC = 0.3 mA, VCE = 5 V, RL = 100 Ω (see figure 3) tr 20 150 μs Fall time IC = 0.3 mA, VCE = 5 V, RL = 100 Ω (see figure 3) tf 30 150 μs Emitter collector voltage Collector dark current SWITCHING CHARACTERISTICS IF IF 0 0 +5V IF IC adjusted by IF T t 100 % 90 % R G = 50 Ω tp tp IC = 20 t p = 1 ms 50 Ω 10 % 0 Channel I Oscilloscope Channel II R L ≥ 1 MΩ 100 Ω tr td ts t on C L ≤ 20 pF tp td tr t on (= td + tr) 20688 Pulse duration Delay time Rise time Turn-on time t tf t off ts tf t off (= ts + tf) Storage time Fall time Turn-off time 96 11698 Fig. 4 - Switching Times Fig. 3 - Test Circuit for tr and tf BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.4 VF - Forward Voltage (V) IF - Forward Current (mA) 1000 100 10 1 0.1 0 0.2 0.4 0.6 0.8 1 20589 1.2 1.4 1.6 1.8 2 2.2 VF - Forward Voltage (V) Fig. 5 - Forward Current vs. Forward Voltage IF = 15 mA 1.3 1.2 1.1 1.0 - 40 20592 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 6 - Forward Voltage vs. Ambient Temperature Document Number: 84778 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.9, 04-Oct-11 TCPT1300X01 www.vishay.com Vishay Semiconductors 10 0.7 IC - Collector Current (mA) IC - Collector Current (mA) VCE = 5 V VCE = 5 V 1 0.1 0.01 0.001 0.1 1 20591 10 IF = 15 mA 0.5 0.4 0.3 0.1 0.0 - 40 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 10 - Collector Current vs. Ambient Temperature ICE0 - Collector Dark Current (nA) 10 000 IF = 25 mA 1 IF = 15 mA IF = 5 mA 0.1 IF = 3 mA IF = 0 1000 VCE = 70 V VCE = 25 V VCE = 5 V 100 10 1 0.01 0.1 1 10 100 VCE - Collector Emitter Voltage (V) 20689 0 20594 Fig. 8 - Collector Current vs. Collector Emitter Voltage 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Fig. 11 - Collector Dark Current vs. Ambient Temperature 0.20 1 IC = 50 µA 0.16 IF = 5 mA 0.14 0.12 0.10 IF = 15 mA 0.08 0.06 0.04 0.02 0.00 - 40 - 20 20590 0 20 40 60 80 IC rel - Relative Collector Current VCEsat - Coll. Emitter Saturation Voltage (V) - 20 20593 10 0.18 IF = 5 mA 0.2 100 IF - Forward Current (mA) Fig. 7 - Collector Current vs. Forward Current IC - Collector Current (mA) 0.6 S 0.8 0.6 0.4 0.2 0 - 1.5 100 Tamb - Ambient Tempearture (°C) Fig. 9 - Collector Emitter Saturation Voltage vs. Ambient Temperature 20595 -1 - 0.5 0 0.5 1 1.5 S - Horizontal Displacement (mm) Fig. 12 - Relative Collector Current vs. Horizontal Displacement Document Number: 84778 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.9, 04-Oct-11 TCPT1300X01 www.vishay.com Vishay Semiconductors 1 IF = 15 mA S 1 ± 0.2 ICrel - Rel. Collector Current + VC = 5 V Optical axis 0.5 74HCT14 UQ VE 10 kΩ 0 - 1.5 -1 - 0.5 0 0.5 1 1.5 13887 GND S - Vertical Displacement (mm) 20610 Fig. 13 - Relative Collector Current vs. Vertical Displacement Fig. 15 - Application example REFLOW SOLDER PROFILE 300 100 80 RL = 100 Ω 70 60 50 40 tf 30 tr 20 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Temperature (°C) tr/tf - Rise/Fall Time (µs) 90 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp up 3 °C/s max. ramp down 6 °C/s 50 10 0 0 0 250 20599 0 500 750 1000 1250 1500 1750 2000 19841 IC - Collector Current (µA) Fig. 14 - Rise/Fall Time vs. Collector Current 50 100 150 200 250 300 Time (s) Fig. 16 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020 FLOOR LIFE No time limit. Moisture sensitivity level (MSL) 1, acc. JEDEC, J-STD-020. RELIABILITY TESTS IN REFERENCE TO AEC-Q101 RELEASE TEST CONDITION DURATION LOT SIZE - REJECTS High temperature storage Tstg (max.) = 100 °C 1000 h 3 x 50 pcs - 0 pcs Low temperature storage Tstg (min.) = - 40 °C 1000 h 3 x 50 pcs - 0 pcs Temperature cycling - 40 °C/+ 100 °C 1000 x 3 x 77 pcs - 0 pcs 85 °C/85 % RH, emitters: VR = 4 V, detectors: VCEO = 5 V 1000 h 3 x 77 pcs - 0 pcs Emitters: IF = 80 mA DC, detectors: VCE = 16 V, duty cycle: 2 min on, 2 min off, Tamb = 25 °C 1000 h (15 000 cycles) 3 x 77 pcs - 0 pcs H3TRB Intermittent operational life RELIABILITY TESTS IN REFERENCE TO ENHANCED TEMPERATURE RELEASE ACC. AEC-Q101 TEST High temperature storage Temperature cycling Power temperature cycle CONDITION DURATION LOT SIZE - REJECTS Tstg (max.) = 125 °C 1000 h 1 x 50 pcs - 0 pcs - 40 °C/+ 150 °C 1000 x 1 x 77 pcs - 0 pcs - 25 °C/+ 85 °C, IF = 50 mA, VCE = 16 V, 2 min. on, 2 min. off 1000 h (15 000 cycles) 1 x 77 pcs - 0 pcs Document Number: 84778 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.9, 04-Oct-11 TCPT1300X01 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 19591 Document Number: 84778 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.9, 04-Oct-11 TCPT1300X01 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters Volume/reel = 2000 pcs 20601 Document Number: 84778 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.9, 04-Oct-11 Packaging and Ordering Information Vishay Semiconductors Packaging and Ordering Information PART NUMBER MOQ (1) PCS PER TUBE TUBE SPEC. (FIGURE) CONSTITUENTS (FORMS) CNY70 4000 80 1 28 TCPT1300X01 2000 Reel (2) 29 TCRT1000 1000 Bulk - 26 TCRT1010 1000 Bulk - 26 TCRT5000 4500 50 2 27 TCRT5000L 2400 48 3 27 TCST1030 5200 65 5 24 TCST1030L 2600 65 6 24 TCST1103 1020 85 4 24 TCST1202 1020 85 4 24 TCST1230 4800 60 7 24 TCST1300 1020 85 4 24 TCST2103 1020 85 4 24 TCST2202 1020 85 4 24 TCST2300 1020 85 4 24 TCST5250 4860 30 8 24 TCUT1300X01 2000 Reel (2) 29 TCZT8020-PAER 2500 Bulk - 22 Notes (1) MOQ: minimum order quantity (2) Please refer to datasheets TUBE SPECIFICATION FIGURES 15198 Fig. 1 Document Number: 80112 Rev. 1.1, 02-Jul-09 For technical questions, contact: [email protected] www.vishay.com 1 Packaging and Ordering Information Vishay Semiconductors Packaging and Ordering Information 15210 Fig. 2 15201 Fig. 3 www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 80112 Rev. 1.1, 02-Jul-09 Packaging and Ordering Information Packaging and Ordering Information Vishay Semiconductors 15199 Fig. 4 15202 Fig. 5 Document Number: 80112 Rev. 1.1, 02-Jul-09 For technical questions, contact: [email protected] www.vishay.com 3 Packaging and Ordering Information Vishay Semiconductors Packaging and Ordering Information 15196 Fig. 6 15195 Fig. 7 www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 80112 Rev. 1.1, 02-Jul-09 Packaging and Ordering Information Packaging and Ordering Information Vishay Semiconductors 20257 Fig. 8 Document Number: 80112 Rev. 1.1, 02-Jul-09 For technical questions, contact: [email protected] www.vishay.com 5 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000