U-UJB Cardholder VLSI NSA-Approved Command Link Decryptor for DoD Satellite Applications The U-UJB VLSI microcircuit implements the Cardholder algorithm for uplink protection of U.S. Department of Defense (DoD) satellite systems. The component is interoperable with the MYK-16B and KIV-7MS ground units. < < < < < < < < < < < Specifications Pin-for-Pin Compatibility with Caribou and Centurion VLSI Data Rate: 1bps to 20 Mbps Features of the U-UJB Cardholder VLSI include: Operating Voltage: 4.5 to 5.5 V DC Power Consumption: 35 mW/MHz (nominal) < NSA certification for Type 1 applications < Command format compatibility with Caribou and Centurion VLSI < Telemetry format compatibility with Caribou and Centurion VLSI < Continuous data mode format (128 bits) < Two command authenticate formats: Ternary and Binary < Maximum uplink rate of 20 Mbps (117,647 commands per second) Data Interface: CMOS Levels Format: NRZ-L and NRZ-M Processing: DESC-qualified; CMOS Gate Array Testing: MIL-M-38510/MIL-STD-883 Additional Testing: Group E and DPA Available Temperature Range: -55 to +125° C Technology: 0.8-micron Double Level Metal Bulk Gate Array MTTF: >10M hours per MIL-HDBK-217E < Package: 84-Pin Ceramic Flat Pack < Part Number: 0N-TBD < Built-in self test (BIST) < Meets QML Class V MIL requirements < DESC-qualified CMOS gate array manufacturer < Radiation hardened for space applications 1M Rad (Si) Sales/Support Inquiries: (310) 616-1124 [email protected] www.raytheon.com/capabilities/ cybersecurity/sis Customer Success Is Our Mission Rev. B. May 2014. Cleared for public release. Copyright 2014 Raytheon Company. All rights reserved Printed in the USA.