MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS LFLGA49 5x5 / FLGA49J CASE 569AC ISSUE A 0.55 0.55 0.45±0.03 6 ×4 0.15 5 2 3 4 5.0±0.08 B 0.65 7 A 5.0±0.08 0.45±0.03 0.10 S A BOTTOM VIEW 0.10 S B TOP VIEW DATE 17 JAN 2014 LASER MARKED INDEX 1 a G F E D 0.03 C B A 0.65 45−∅0.35±0.03 S AB 0.075 S 0.8±0.05 0.0 NOM SIDE VIEW S 0.05 S NSMD Off set Via type (0.19) LAND GENERIC MARKING DIAGRAM* XXXXXX YMDDD (0.26) (0.19) (0.26) (R0.075) (R0.2) Aperture of Solder Resist DOCUMENT NUMBER: STATUS: NEW STANDARD: DETAIL_a 98AON67020E ON SEMICONDUCTOR STANDARD http://onsemi.com LFLGA49 5X5 / FLGA49J 1 © Semiconductor Components Industries, LLC, 2002 October, DESCRIPTION: 2002 − Rev. 0 XXXXX = Specific Device Code Y = Year M = Month DDD = Additional Traceability Data *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. Case Outline Number: PAGE 1 OFXXX 3 LFLGA49 5x5 / FLGA49J CASE 569AC ISSUE A DATE 17 JAN 2014 (P A D) 0.19 0.26 (S R) R0.1 a DETAIL_a R0.075 (P A D) 0.285 0.285 (S R) 0.215 (S R) 0.215 0.26 0.65 0.65 (P A D) 0.19 ∅0.35 (P A D) ∅0.45 (S R) SOLDERING FOOTPRINT* (Unit: mm) NOTES: 1. The measurements are not to guarantee but for reference only. 2. Module level verification after set designing must be implemented. Validating solderbility and Reliability verification for joint areas such as Exposed Die−pad and must be carried out. Drawing above is a design applicable for NSMD pad specification. For SMD pad specification, layout of SR opening size specified as PKG terminal size = Pad size is to be complied. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. DOCUMENT NUMBER: STATUS: NEW STANDARD: 98AON67020E ON SEMICONDUCTOR STANDARD http://onsemi.com LFLGA49 5X5 / FLGA49J 2 © Semiconductor Components Industries, LLC, 2002 October, DESCRIPTION: 2002 − Rev. 0 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. Case Outline Number: PAGE 2 OFXXX 3 DOCUMENT NUMBER: 98AON67020E PAGE 3 OF 3 ISSUE REVISION DATE O RELEASED FOR PRODUCTION FROM SANYO ENACT# S−415 TO ON SEMICONDUCTOR. REQ. BY D. TRUHITTE. 29 FEB 2012 A ADDED MARKING AND SOLDER FOOTPRINT INFORMATION. REQ. BY D. TRUHITTE. 17 JAN 2014 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. © Semiconductor Components Industries, LLC, 2014 January, 2014 − Rev. A Case Outline Number: 569AC