PAM8100 Green 3-VRMS Line Driver with Adjustable Gain Description Pin Assignments The PAM8100 is a 3-VRMS pop-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The device is ideal for single-supply electronics where size and cost are critical design parameters. TSSOP-14 The PAM8100 is capable of driving 3Vrms into a 2.5-kΩ load with 5-V supply voltage. The device has differential inputs and uses external gain-setting resistors to support a gain range of ±1 V/V to ±10 V/V. The PAM8100 has built-in mute control for pop-free on/off control. The PAM8100 has an external and internal undervoltage detector that mutes the output. Using the PAM8100 in audio products can reduce component count considerably compared to traditional methods of generating a 3-Vrms output. +INR +INL -INR -INL OUTR OUTL SGND UVP MUTE PGND PVSS PVDD CN CP The PAM8100 is available in a 14-pin TSSOP. Features Applications Eliminates Pop/Clicks Eliminates Output DC-Blocking Capacitors Provides Flat Frequency Response 20Hz20kHz Low Noise and THD SNR > 105 dB Typical Vn < 13uVms THD+N < 0.005% Output Voltage Into 2.5-kΩ Load 2 Vrms With 3.3V Supply Voltage 3 Vrms With 5V Supply Voltage Differential Input External Undervoltage Mute Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) PDP / LCD TVs Blu-ray Disc™, DVD Players Home Theater in a Box Set-Top Boxes Typical Applications Circuit R1 R3 1 R2 RIGHT INPUT +INR +INL 14 R3 R3 2 - INR C1 R2 - INL 13 C1 PAM8100 3 RIGHT OUTPUT OUTL OUTR 4 SGND UVP R3 LEFT INPUT R2 12 LEFT OUTPUT 11 R11 5 1uF R1 C3 C2 - R1 - C3 R2 C1 C1 C2 C3 R1 + C3 + EN PGND 6 PVSS PVDD 7 CN CP R12 10 9 8 5V Supply Linear Low Drop System Supply 1uF 1uF Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. PAM8100 Document number: DS36986 Rev. 1 - 2 1 of 7 www.diodes.com December 2015 © Diodes Incorporated PAM8100 Pin Descriptions Pin Number Name I/O Description 1 +INR I Right-channel OPAMP positive input 2 -INR I Right-channel OPAMP negative input 3 OUTR O Right-channel OPAMP output 4 SGND P Signal ground 5 MUTE I Mute, active-high 6 PVSS P Supply voltage 7 CN I/O Charge-pump flying capacitor negative terminal 8 CP I/O Charge-pump flying capacitor positive terminal 9 PVDD P Positive supply 10 PGND P Power ground 11 UVP I Under voltage protection input 12 OUTL O Left-channel OPAMP output 13 -INL I Left-channel OPAMP negative input 14 +INL I Left-channel OPAMP positive input Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.) Symbol Description Supply Voltage VDD VALUE UNIT –0.3 to 6.0 V VI Input Pins TA Operating Free-Air Temperature Range –40 to +85 °C TJ Operating Junction Temperature Range –40 to +150 °C Storage Temperature Range –65 to +150 °C TSTG GND-0.3 to VDD + 0.3 V Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.) Symbol Parameter Min Nom Max Unit VIN Supply Voltage - 2.5 - 5 V RL Load Impedance - 0.6 10 - kΩ VIH High-Level Input Voltage MUTE 1.2 - VIN V VIL Low-Level Input Voltage MUTE -0.3 - 0.4 V TA Operating Free-Air Temperature -40 25 +85 °C Thermal Information Parameter Symbol Package Maximum Unit Thermal Resistance (Junction to Ambient) θJA TSSOP-14 35 °C/W Thermal Resistance (Junction to Case) θJC TSSOP-14 14 °C/W PAM8100 Document number: DS36986 Rev. 1 - 2 2 of 7 www.diodes.com December 2015 © Diodes Incorporated PAM8100 Electrical Characteristics (@VDD=3.3V, TA=+25°C, RL=10kΩ, C(PUMP)=C(PVSS) =1μF , CIN=2.2μF, RIN=15kΩ, Rfb=30kΩ, Unless otherwise specified.) PARAMETER Symbol Conditions Min Typ Max Units Output Offset Voltage VOS No load - - 3 mV Power-Supply Rejection Ratio PSRR Input AC-GND, f=1kHz,Vpp=200mV - 70 - dB High-Level Output Voltage VOH VDD=3.3V 3.1 - - V Low-Level Output Voltage VOL VDD=3.3V - - -3.05 V MUTE High VIH VDD=3.3V 1.5 - - V MUTE Low VIL VDD=3.3V - - 0.4 V No load, MUTE=VDD - 10 - mA No load, MUTE=GND - 10 - mA 2.0 2.4 - Vrms Supply Current Output Voltage (outputs in phase) Total Harmonic Distortion Plus Noise Crosstalk Maximum Capacitive Load IDD Vo THD=1%, VDD=3.3V, f=1kHz THD+N VO=2Vrms, f=1kHz - 0.0015 - % CS VO=1Vrms, f=1kHz - -110 - dB - - 470 - pF Input AC-GND, A-weighted - 13 - uVrms MCL Noise Output Voltage VN Signal-to-Noise Ratio SNR VO=2Vrms, A-weighted - 104 - dB External UnderVoltage Detection VUVP - - 1.25 - V External Under-Voltage Detection Hysteresis Current IHYSI - - 5 - µA fCP - 200 300 400 kHz Charge Pump Frequency PAM8100 Document number: DS36986 Rev. 1 - 2 3 of 7 www.diodes.com December 2015 © Diodes Incorporated PAM8100 Performance Characteristics (@TA=+25°C, VDD=3.3V, C(PUMP)=C(PVSS) =1μF , CIN=2.2μF, RIN=15 kΩ, Rfb=30kΩ,unless otherwise specified.) THD+N vs. Output Voltage (RL=10kΩ) THD+N vs. Output Voltage (RL=600Ω) 10 10 5 5 f=100Hz/1kHz/10kHz (Red/Pink/Blue) 2 2 1 1 0.5 0.5 0.2 % % 0.2 0.1 0.1 0.05 0.05 0.02 f=100Hz/1kHz/10kHz (Red/Pink/Blue) 0.02 0.01 0.01 0.005 0.005 0.003 100m 0.002 200m 300m 400m 500m 700m 1 2 3 V 0.0009 100m 200m 300m 400m 500m 700m 1 2 3 V THD+N vs. Frequency (RL=10kΩ) THD+N vs. Frequency (RL=600Ω) 1 0.5 1 VO=0.5Vrms/1 Vrms /2 Vrms (Red/Pink/Blue) 0.5 VO=0.5Vrms/1 Vrms /2 Vrms (Red/Pink/Blue) 0.2 0.2 0.1 0.1 0.05 % % 0.05 0.02 0.02 0.01 0.01 0.005 0.005 0.002 0.001 0.002 20 0.0006 20 50 100 200 500 1k 2k 5k 10k 20k Hz 50 100 200 500 1k 2k 5k 10k 20k Hz Crosstalk vs. Frequency (RL=10kΩ) Gain vs. Frequency (RL=10kΩ) +8 -70 -76 -82 VO=1Vrms, Vref=1V Red---Left to Right Blue---Right to Left +6.4 -88 -94 d B +4.8 -100 d B g -106 A +3.2 -112 -118 +1.6 -124 -130 20 50 100 200 500 1k 2k 5k 10k 20k Hz +0 20 50 100 200 500 1k 2k 5k 10k 20k 30k Hz PAM8100 Document number: DS36986 Rev. 1 - 2 4 of 7 www.diodes.com December 2015 © Diodes Incorporated PAM8100 Ordering Information PAM8100 X X X Package Type R: TSSOP Pin Configuration R: 14 Pin Shipping Package R: Tape & Real Part Number Package Type Shipping PAM8100RRR TSSOP-14 2,500/Tape & Real Marking Information TSSOP-14 PAM8100 XXXYW XXX: Internal Code Y: Year: 1, 2, 3 ~ W: Week: "A~Z" means week 1 to week 26; "a~y" mean week 27 to 51, "z" means 52 and 53 PAM8100 Document number: DS36986 Rev. 1 - 2 5 of 7 www.diodes.com December 2015 © Diodes Incorporated PAM8100 Package Outline Dimensions (All dimensions in mm.) 0.25 Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. B Gauge Plane Seating Plane L F1 a2 Pin# 1 Indent F Detail ‘A’ G K A a1 D C TSSOP-14 Dim Min Max a1 7° (4X) a2 8° 0 A 4.9 5.10 B 4.30 4.50 C 1.2 D 0.8 1.05 F 1.00 Typ F1 0.45 0.75 G 0.65 Typ K 0.19 0.30 L 6.40 Typ All Dimensions in mm Detail ‘A’ Suggested Pay Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X C1 Dimensions Value (in mm) X 0.45 Y 1.45 C1 5.9 C2 0.65 C2 Y PAM8100 Document number: DS36986 Rev. 1 - 2 6 of 7 www.diodes.com December 2015 © Diodes Incorporated PAM8100 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2015, Diodes Incorporated www.diodes.com PAM8100 Document number: DS36986 Rev. 1 - 2 7 of 7 www.diodes.com December 2015 © Diodes Incorporated