CP240 X L C D D EVELOPMENT K I T Q UICK - S TA RT G UIDE Installation Connect CP240x LCD Development Board to F9xx Target Board CP240x LCD Development Board R1 5 P0.2 P1.6 J16 P1.5 J4 J11 J13 J5 J4 PW R H 1 6 Insert Development Kit CD in CD-ROM Drive VB AT WALL_PWR +3V D J14 RESE T IMEASURE J5 D2 LE D AAA_BAT J10 J7 J3 VDD/DC+ D1 Connect Power Supply to Target Board J12 +1V D J6 www.silabs.com 5 J9 J8 COIN_CELL J2 P 3 U3 SILICON LABS www.silabs.com U 1 IMEASURE SILICON LABS 4 P0.3 USB POWER TOUCH SENSE P2 SWITCH .1 F930 J 1 Connect USB Cable to USB Debug Adapter ` DEBUG TOUCH SENSE P2 SWITCH .0 CP2400-GQ LCD DEVELOPMENT BOARD CP2400 3 J2 J17 H 2 O F F O N S W 4 VBA T J1 SW5 1 CELL J15 U 1 Connect USB Debug Adapter to Target Board with DEBUG Cable 2 CELL P 1 J5 2 F9xx Target Board POWER OFF BEFORE SWITCHING MODE 1 P2 Connect USB Cable to PC Note: Target Board may be powered from USB Debug adapter Note: Some Target Boards include options for alternate power sources. See Development Kit User's Guide for details. 7 Select “Install Development Tools” from the introduction window and follow the on-screen instructions Silicon Laboratories Inc. 400 West Cesar Chavez Austin, TX 78701 Email: [email protected] Internet: www.silabs.com From the Programs list in the Start menu, select Silicon Laboratories and click on the Silicon Laboratories IDE logo 8 Copyright © 2009 by Silicon Laboratories Note: If autorun does not launch the introduction window, run "SETUP.EXE" directly from the CD. 9 Silicon Laboratories IDE opens Rev. 0.1 11/09 Example Program 10 Select “Connection Options…” from “Options” menu 11 Connect to Target Board 12 Select “Download Object File…” from “Debug” menu Select USB Debug Adapter Next, click Browse and select the hex file “CP240x_Digits_ Example.hex” located at “C:\SiLabs\ MCU\CP240x\ CP240x_LCD_Example” Select C2 Debug Interface Click Download 13 Execute example program Digits “01234567” will be shown on the CP240x LCD Development Board 14 Stop execution of example program 15 Application Note 104: Integrating Keil 8051 Tools Into the Silicon Labs IDE has information on unlocking the evaluation compiler from a 2k code size limit to a 4k limit. It can be found on our application notes page here: https://www.silabs.com/products/mcu/ Pages/ApplicationNotes.aspx The Keil Toolset Serial Number is needed and can be found on the Dev Kit CD 16 Open Project file “CP240x_LCD_Example.wsp” located at “C:\SiLabs\MCU\CP240x\ CP240x_LCD_Example\Source” 17 Click on Build and Download the Program “main.c” to open source file 18 Follow the instructions in the C 2400 and CP2401 Development Kit User’s Guide to modify the project and run other included examples The User’s Guide can be found under “Browse Documentation” in the menu on Step 7 of this Quick Start Guide If you are having trouble installing and/or using the development kit, please use the following support resources: CP2400 and CP2401 Development Kit User's Guide (click "Browse Documentation" from the CD introduction window) Application Note “AN104: Integrating Keil 8051 Tools Into the Silicon Labs IDE" (contains instructions for obtaining the 4 k limited version of the Keil toolset) Latest versions of Application Notes can be found at https://www.silabs.com/products/mcu/Pages/ApplicationNotes.aspx MCU Knowledgebase (available at www.silabs.com SUPPORT) Contact an Applications Engineer using the online information request form (available at www.silabs.com SUPPORT Contact Technical Support). 2 Rev. 0.1