SUBMINIA TURE FUSES UBMINIATURE No. 395 / TE5 ® UL 248-14, 125 V V,, F Specifications Time-Current Packaging Quick Acting (F) Characteristic 000: Tape/Ammopack (1400 pcs.) 044: Short Leads - Bulk (1400 pcs.) Standard Materials UL 248-14 CSA C22.2 No. 248.14 Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V0 Round Pins: Copper, Sn plated Approvals UL Listed cUL Listed METI-PSE Operating TTemperature emperature -40 ºC to +85 ºC (consider de-rating) Features Dimensions (mm) max. 8 +10 ºC to +60 ºC relative humidity ≤ 75 % yearly average, without dew, maximum value for 30 days - 95 % Vibration Resistance 24 cycles at 15 min. each (EN 60068-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration Further infos see: www.wickmanngroup.com Lead Pull Strength Further application infos see Fuseology: 10 N (IEC 60068-2-21) www.wickmanngroup.com/download/ fuseology.pdf Solderability 260 ºC, ≤ 3 s (Wave) 350 ºC, ≤ 3 s (Soldering iron) Soldering Heat Resistance Holes in PCB 260 ºC, 10 s (IEC 60068-2-20) Long Leads (L=18.8 mm) Short Leads (L=4.3 mm) Marking , F, Current Rating, Approvals Limits for Pre-arcing Time Unit Weight 50 mA ... 6.30 A < 60 s <5s 0.60 g (approx.) Permissible continuous operating current is ≤ 70 % at ambient temperature of 23 ºC (73.4 ºF). Rated Amp Voltage Breaking Voltage Drop Power Dissipation Melting Integral 1.0 x IN 10 x IN Current Code Rating Capacity 1.0 x IN max. (mV) max. (mW) max. (A2s) 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A Order Information 050127 0050 0063 0080 0100 0125 0160 0200 0250 0315 0400 0500 0630 0800 1100 1125 1160 1200 1250 1315 1400 1500 1630 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V Qty. 100A / 125 V AC 50-60 Hz cos ϕ = 1.0 OrderNumber WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] Series 395 1600 1300 1200 1100 1350 1000 950 900 800 230 220 210 200 190 180 170 160 150 140 130 120 115 Amp Code Americas Tel: +1 404 699-7820 E-mail: [email protected] 85 85 100 110 160 150 210 225 255 95 110 135 160 190 225 275 450 375 445 520 600 850 0.0001 0.00013 0.0002 0.0013 0.0019 0.0037 0.0075 0.013 0.026 0.015 0.025 0.045 0.068 0.13 0.2 0.39 0.53 1.1 1.9 3.2 6.1 9.7 Packaging Asia Tel: +852 26 14-1108 E-mail: [email protected] Approvals • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • CCCe 2.0 x IN METI-PSE 2.0 x IN cUL Rated Current UL 0,5 min 5,08 Stock Conditions W ebLinks 1,5 1 +0,1 L ∅ 0,6 -40 ºC/+85 ºC/21 days (EN 60068-1,-2-1,-2-2,-2-78) Reduced PCB space requirements Direct solderable or plug-in versions Internationally approved Low internal resistance Shocksafe casing Vibration resistant Halogen free CCCe for China import max. 4 8,5 Climatic Category • • • • • • • • • • • • • • • • • • • • • • Specifications are subject to change without notice China Tel: +86 21 6432 5146 E-mail: [email protected] SUBMINIA TURE FUSES UBMINIATURE 00 0,0 10 TE5® / No. 395 I-t Characteristics ,00 10 (Min-Max Limit) UL 248-14 Test value 0 0 1,0 0 10 10 Time (sec.) 0 1 0.1 1 0.0 01 0.0 1 1.5 2 3 4 5 6 7 8 9 10 15 I Fault / I Rated Contact WICKMANN for individual I-t curves 050127 WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] Americas Tel: +1 404 699-7820 E-mail: [email protected] Asia Tel: +852 26 14-1108 E-mail: [email protected] China Tel: +86 21 6432 5146 E-mail: [email protected]