110V Maxi Mini Micro FEATURES • • • • • • • • • Input Voltage: 66-154Vdc Output Voltage: 3.3-48Vdc Up to 120 W/in3 Low noise zero-current switching and zerovoltage switching technology Single-wire paralleling Output voltage adjusts from 10-110% Logic enable / disable Input undervoltage lockout Output overvoltage protection SPECIFICATIONS SELECTION TABLES OUTPUT VOLTAGE (VDC) INPUT Voltage range MINI MAXI 3.3V 50 100 200 5V 75 150 300 66-150Vdc OUTPUT Set point accuracy ±1%Vout nom Nominal input; Line regulation ±0.02%Vout nom. Low line to high Load regulation ±0.02%Vout nom. No load to full Temperature regulation ±0.002%Vout/°C -20°C to 100oC Ripple and noise, p-p Remote sense compensation Overvoltage set point 100 mV Current limit Efficiency: 5V out 24V out 115% out max. 83% 88% Full load, 20MHz 0.5 Volts 115% Vout nom. Vout 95% of Nominal input; load; 25°C 88% 8V 75 150 300 12V 100 200 400 15V 100 200 400 24V 100 200 400 28V 100 200 400 36V 100 200 400 48V 100 200 400 PRODUCT GRADE SPECIFICATIONS E 10-110 % Vout nom. Short circuit current 115% out max. Output Voltage Temp. Cycling Isolation voltage 3000 Vrms Input to Output (°C) T H M Storage Temp. (°C) -20 to 125 -40 to 125 -40 to 125 -55 to 125 -65 to 125 (typical unless otherwise noted) STANDARDS AND APPROVALS UL60950-1, CSA60950-1, EN60950-1, IEC 60950-1 none none none 24 hours 24 hours (-55 to 125) (-65 to 125) Burn-In none none none 12 hours 24 hours Low Temp. Test (°C) none none none -40°C -55°C High Temp. Test (°C) none none none 100°C 100°C Final Test Data none none none Refer to mechanical drawings PART NUMBERING Doc. No. PBC9 Rev.C 28-4-11 C Operating Temp. (°C) -10 to 100 -20 to 100 -40 to 100 -40 to 100 -55 to 100 Programming range Safety UNITS MICRO Powering Progress – www.powerbox.com.au DC-DC PCB MOUNTED CONVERTERS & POWER MODULES 5 0 - 4 0 0 W AT T S - D C / D C C O N V E R T E R S 259