MINIA TURE FUSEHOLDERS INIATURE Holder / No. 596 PC Mount, for 5x20mm Fuses Not for new designs; please refer to holder no. 830 Specifications Montage (2) Solder pins0.5 x 1.1mm 12 23 -0,5 11,7 ø10,5 ±0,2 ±0,2 +0,2 +0,1 5,25 1,1 +0,1 Leiterplatte Printed Circuit Board 12,5 +0,2 1,25 Duroplastic (Phenolplast PF), black Thermoplastic (Polyamide PA 6.6), UL 94 V-0, black Copper alloy, corrosion protected solderable tinned Cap: 10,25 +1 5 -0,5 0,5 +0,05 IP 40 (IEC 60529) Materials Holder: ±0,1 4 ±0,2 Protection Class & Category ±0,15 Metal Parts: Terminals: Electrical Data (23 ºC) Rated Voltage: 250 V max. Current/Power: 6.3 A / 2.0 W 12,5 +0,2 Operating TTemperature emperature ø1,3 -25 °C to 70 °C (consider de-rating) Stock Conditions 10 °C to 60 °C Holes in the Printed Circuit Board Contact Resistance ≤ 5 mΩ Dielectric Strength 3 kV, 50Hz, 1 min., dry Insulation Resistance > 10 MΩ (500 V DC, 1 min.) Cap / No. 583 Solderability 15,7 235 ºC, 3 sec. (Wave) 350 ºC, 1 sec. (Soldering Iron) ±0,4 -0,2 Soldering Heat Resistance ø10,3 Renknase Bayonet-connector-nose Flush Mount TType ype 8,5 ±0,5 260 °C, 5 sec. Minimum Cross Section Conduction Path - 0.2mm2 Marking 596, 250 V Schlitz für Schraubendreher Slot for screw-driver Unit weight 2,2 g (596) / 1,7 g (583) Order Information Packaging Bulk (100 St.) Order Numbers Holder Cap No. 596 0000 000 No. 583 0000 000 Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 050909 In our continuing strategy to deliver unparalleled circuit protection solutions, technical expertise and application leadership, we proudly introduce the WICKMANN Group and its products to the Littelfuse portfolio. WebSite www.littelfuse.com