NStar™ QUICK REFERENCE GUIDE Install it, use it, expand it. It’s as easy as ABC. NStar™ Quick Reference Access Control System Typical 2 Reader NStar System NStar System Expansion * Please note that COM Expansion Board (NTEXPDI4) and Output Cables (NTEXPC9) may be required if second COM Port is not available To build your NStar system, please use the parts reference on the back of this guide NStar™ Access Control System Connecting to a PC Ethernet Card To build your NStar system, please use the parts reference on the back of this guide Quick Reference Using TCP/IP Connections NStar™ Parts Reference Access Control System ADI-G Ref Part Code Description ADI-G Ref PC with NStar Software 927-2231 1 PC-NSTAR NStar PC Build pre-configured with NStar Software when purchased with NStar Starter Kit Or PC with Min. Specs: 2GHz Intel Pentium 4, 512MB RAM, 1024x768 Display, 18GB Hard Disk, 17” Monitor, 1 Serial, 1 Parallel, Windows XP Pro, 2000 Pro, 2003 Server A B LANSERIALTUK 912-0306 NSLAN-1 922-0056 1382N 12Vdc, 2 Amp PSU 4 924-0005 MUS3A Surface Mount Break Glass Unit 5 919-0109 S300 Mini Magnetic Lock (10001) 026-0021 A60 Flush door status contact, white 923-0040 RTE001S Surface/Flush mount exit button Network Serial Comms Interface Ethernet Daughter Board NStar Starter and Expansion Kits 2 911-0388 NSSKRI-UK or 2 2a 911-0387 NSSKI-UK 911-0386 NSEKRI-UK or 2a 911-0385 NSEKI-UK Honeywell Access Systems Charles Avenue Burgess Hill RH15 9UF Tel: +44 (0) 1444 251180 www.honeywell.com/security/uk Description 3 Network Interfaces 912-0301 Part Code Lock Components 1x NStar Access Control Software 1x NS2 2-Reader Control Panel 1x PSX220 Combo Transformer 2x S-4 Suppressor Kits 1x RS232/485 Interface 1x CBL50 - Serial Comms Cable (15m) 2x OmniProx Readers (OP10) As above, but without readers Contact Technical Support to ensure compatibility of alternative readers NStar Expansion Kit: 1x NS2 2-Reader Control Panel 1x PSX220 Combo Transformer 2x S-4 Suppressor Kits 2x OmniProx Readers (OP10) As above, but without readers Contact Technical Support to ensure compatibility of alternative readers For further information, contact ADI-GARDINER on 0161 767 2900 System Cable – drums of 305 metres (1000’) 6 7 927-2216 NC2441-TN RS485 Panel Comms Cable 927-2213 NC1861-BL Reader Cable 8 927-2211 NC1821-OR Output/Power Cable OmniProx Readers (Compatible with HID Cards) 909-0452 PR-OMNI-10HONE OP10 Proximity Mullion Reader (Small) 909-0454 PR-OMNI-30HONE OP30 Proximity Mullion Reader 909-0456 PR-OMNI-45HONE 909-0461 PR-OP90HONE OP45 Proximity Reader (fits UK single-gang electrical box) OP90 Vandal Resistant Reader OmniProx Cards 926-0755 PX-4-H 926-0795 PVC-H-4 926-0769 PX-4-H-SPEC HAS-NSTAR-01-EN(1007)QG-COE October 2007 ©2007 Honeywell International Inc. HID Prox Card (34 bit) HID PVC Prox Card (34 bit) As above but specific site code & number range