Process Change Notice #1508031 ____________________________________________________________________________________________________ User Registration Register today to create your account on Silabs.com. Your personalized profile allows you to receive technical document updates, new product announcements, “how-to” and design documents, product change notices (PCN) and other valuable content available only to registered users. http://www.silabs.com/profile PCN Date: 8/3/2015 Effective Date: 8/10/2015 Title: C8051F36x Revision C, Addendum to PCN 1505051 Originator: Kafai Leung Phone: +1-512-532-5232 Dept: MCU Marketing Customer Contact: Kathy Haggar Phone: +1-512-532-5261 Dept: Sales PCN Type: ☐ Datasheet ☐ Foundry ☐ Packing ☒ Product Revision ☐ Assembly ☐ Labeling ☐ Discontinuance ☐ Test ☐ Other Last Order Date: Not Applicable PCN Details Description of Change: This PCN is issued as an Addendum to PCN 1505051: Hardware revision C of the C8051F36x devices and revision 1.1 of the corresponding datasheet for these products. In PCN 1505051, replacement part numbers for CF360-SM0543GQ, CF360-SM0845GQ, CF360-XM0756GQ, CF360-SM0543GQR, CF360SM0845GQR, CF360-XM0756GQR were listed as TBD. The product identification section has now been updated to include the replacement part numbers. Silicon Labs is pleased to announce hardware revision C of the C8051F36x devices and revision 1.1 of the corresponding datasheet for these products. For customers using Revision B the change to Revision C eliminates an issue where the CPU causes an execution failure for the “CPL C” (Complement Carry bit) instruction under a narrow set of conditions involving an instruction order dependency. After the effective date of this PCN, Silicon Labs reserves the right to deliver Revision C for customers ordering revision B. Please refer to the Product Identification section. Reason for Change: C8051F36x Revision C release C8051F36x Datasheet revision 1.1 release Impact on Form, Fit, Function, Quality, Reliability: There is no impact to form, fit, quality or reliability. The following functions are impacted: - The “CPL C” (Complement Carry bit) instruction operates as expected at specified operating conditions W7206F1 Process Change Notice Form rev AU The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 4 Process Change Notice #1508031 ____________________________________________________________________________________________________ Product Identification: The following orderable part numbers are affected: After the effective date of this PCN, Silicon Labs reserves the right to deliver Revision C for customers ordering revision B. Existing Part Number C8051F360-GQ C8051F361-GQ C8051F362-GM C8051F363-GQ C8051F364-GQ C8051F365-GM C8051F366-GQ C8051F367-GM C8051F368-GQ C8051F369-GM C8051F360-GQR C8051F361-GQR C8051F362-GMR C8051F363-GQR C8051F364-GQR C8051F365-GMR C8051F366-GQR C8051F367-GMR C8051F368-GQR C8051F369-GMR CF360-SM0543GQ CF360-SM0845GQ CF360-XM0756GQ CF360-SM0543GQR CF360-SM0845GQR CF360-XM0756GQR Replacement Part Number C8051F360-C-GQ C8051F361-C-GQ C8051F362-C-GM C8051F363-C-GQ C8051F364-C-GQ C8051F365-C-GM C8051F366-C-GQ C8051F367-C-GM C8051F368-C-GQ C8051F369-C-GM C8051F360-C-GQR C8051F361-C-GQR C8051F362-C-GMR C8051F363-C-GQR C8051F364-C-GQR C8051F365-C-GMR C8051F366-C-GQR C8051F367-C-GMR C8051F368-C-GQR C8051F369-C-GMR CF360V0543CGQ CF360V0845CGQ CF360M0756CGQ CF360V0543CGQR CF360V0845CGQR CF360M0756CGQR Drop in Compatible Indicator Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Note: The part numbers above include tape and reel variants which are denoted with an “R” at the end of the orderable part number. Last Date of Unchanged Product: 8/10/2015 Qualification Samples: Samples are available upon request. Please contact your local sales representative to order samples. W7206F1 Process Change Notice Form rev AU The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 5 Process Change Notice #1508031 ____________________________________________________________________________________________________ Specific conditions of acceptance of this change will be considered on a case by case basis if written notice is submitted within 30 days of this notice. To request further data or inquire about this notification, please contact your local Silicon Labs sales representative. A list of Silicon Labs sales representatives is available at www.silabs.com . In some cases rejection of a change notice may impact Silicon Labs product pricing, delivery, quality, or reliability. Customer Early Acceptance Sign Off: Customers may approve early PCN acceptance by completing the information below: Early Acceptance: Date: Name: Company: Email your early Acceptance approval to: [email protected] Qualification Data: See Appendix. W7206F1 Process Change Notice Form rev AU The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 6 Process Change Notice #1508031 ____________________________________________________________________________________________________ Appendix W7206F1 Process Change Notice Form rev AU The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 7 Process Change Notice #1508031 ____________________________________________________________________________________________________ W7206F1 Process Change Notice Form rev AU The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 8