Si510/Si511 100 kHz to 250 MHz Crystal Oscillator (XO) Series Description Features The Si510/511 XO utilizes Silicon Labs’ advanced DSPLL technology to provide any frequency from 100 kHz to 250 MHz. Unlike a traditional XO, where a different crystal is required for each output frequency, the Si510/511 uses one fixed-frequency crystal and Silicon Labs’ proprietary DSPLL synthesizer to generate any frequency across this range. This IC-based approach allows the crystal resonator to provide enhanced reliability, improved mechanical robustness, and excellent stability. In addition, this solution provides superior supply noise rejection, simplifying low-jitter clock generation in noisy environments. Crystal ESR and DLD are individually productiontested to guarantee performance and enhance reliability. The Si510/511 is factory-configurable for a wide variety of user specifications, including frequency, supply voltage, output format, output enable polarity, and stability. Specific configurations are factory-programmed at time of shipment, eliminating long lead times and non-recurring engineering charges associated with custom frequency oscillators. Product Selector Guide XO Series Si510 Si511 Description Single frequency oscillator, OE pin 2 Single frequency oscillator, OE pin 1 A complete Si510-511 data sheet can be found here: http://www.silabs.com/Support%20Documents/TechnicalDocs/si510-11.pdf Supports any frequency from 100 kHz to 250 MHz Low jitter: 0.8 ps RMS (12 kHz–20 MHz) Frequency stability: ±20/±30/±50 ppm including 10-year aging 2x tighter stability than SAW oscillators Programmable output enable pin location and polarity settings 1.8 V, 2.5 V, 3.3 V VDD supply operation Differential (LVPECL, LVDS, HCSL) or CMOS output options Standard frequencies in stock and available for rapid delivery Custom frequencies available with < 2 week lead times Applications SONET/SDH/OTN Gigabit Ethernet Fibre Channel/SAS/SATA 3G-SDI/HD-SDI/SDI FPGA/ASIC/SoC clocking Pin-out Pin Description Pin NC/OE 1 6 VDD 1 OE/NC 2 5 CLK- 2 GND 3 4 CLK+ (top view) 3 4 5 6 Description Si510: NC = No Connect Si511: OE = Output Enable Si510: OE = Output Enable Si511: OE = No Connect GND = Ground CLK+ = Clock output CLK- = Complementary Clock output VDD = Power Supply Selected Electrical Specifications VDD = 2.5 or 3.3 V ±10%, TA = -40 to 85 ºC Parameter Frequency Range Symbol FCLK Supply Voltage VDD Supply Current IDD Total Stability1 FSTAB Rise/Fall Time TR/TF Phase Jitter (RMS) Duty Cycle Output Enable (OE) LVPECL Output Option LVDS Output Option Notes: 1. 2. J DC VIH VIL VOC VO VOC VO Test Condition/Comment LVPECL/LVDS 3.3 V option 2.5 V option LVPECL (output enabled) LVDS (output enabled) Tristate (output disabled) Temperature stability: ±25 ppm LVPECL option LVDS option 12 kHz to 20 MHz integration BW (brickwall)2 All formats mid-level (50 Ω to VDD – 2 V, single-ended) swing (50 Ω to VDD – 2 V, single-ended) mid-level (100 Ω line-line, VDD = 3.3/2.5 V) swing (100 differential termination, single-ended) Min Typ Max 0.1 — 250 2.97 3.3 3.63 2.25 2.5 2.75 — 39 43 — 19 23 — — 18 -50 — 50 — — 565 — — 800 — 0.8 1.0 48 50 52 0.8 x VDD — — — — 0.2 x VDD — VDD – 1.4 — 0.55 0.8 0.9 1.13 1.23 1.33 0.25 0.35 0.45 Unit MHz V V mA mA mA ppm ps ps ps % V V V VPP V VPP Total stability includes initial accuracy, operating temperature, supply voltage change, load change, shock and vibration (not under operation), and 10 years aging at 40 ºC. All Crystal Oscillator (XO) devices are screened for jitter at production test. Phase jitter specification applies to output frequencies: 100, 106.25, 125, 148.35165, 148.5, 155.52, 156.25, 212.5 MHz. Rev. 0.1 12/13 Copyright© 2013 by Silicon Labs Si510/Si511 Crystal Oscillator (XO) Series Si510/Si511 100kHz to 250MHz Crystal Oscillator (XO) Series Absolute Maximum Ratings1 Environmental Compliance and Package Information Parameter Symbol Rating Unit Maximum Operating Temp. TAMAX 85 ºC Storage Temperature TS -55 to 125 ºC Supply Voltage VDD -0.5 to 3.8 ºC Input Voltage VIN 0.5 to VDD +0.3 V ESD HBM (JESD22-A114) HBM 2 kV Solder Temperature2 TPEAK 260 ºC Solder Time at TPEAK2 TP 20-40 sec 1. Stresses beyond those listed in this table may cause permanent damage to the device. Functional operation specification compliance is not implied at these conditions. Exposure to maximum rating conditions for extended periods may affect device reliability. 2. The device is compliant with JEDEC J-STD-020. Parameter Mechanical Shock Mechanical Vibration Solderability Gross and Fine Leak Resistance to Solder Heat Moisture Sensitivity Level (MSL) Contact Pads Test Condition MIL-STD-883, Method 2002 MIL-STD-883, Method 2007 MIL-STD-883, Method 2003 MIL-STD-883, Method 1014 MIL-STD-883, Method 2036 1 Gold over Nickel Thermal Conditions Parameter Symbol Thermal Impedance JA Test Condition Still air Value 110 Unit ºC/W Standard Frequency Orderable Part Numbers Si510 5x7mm 3.3V LVPECL 3.3V LVDS 2.5V LVDS Si510 3.2x5mm 3.3V LVPECL 3.3V LVDS 2.5V LVDS Si511 5x7mm 3.3V LVPECL 3.3V LVDS 2.5V LVDS Si511 3.2x5mm 3.3V LVPECL 3.3V LVDS 2.5V LVDS 74.1758 MHz 510ABA000149AAG 510BBA000149AAG 510FBA000149AAG 74.1758 MHz 510ABA000149BAG 510BBA000149BAG 510FBA000149BAG 74.1758 MHz 511ABA000149AAG 511BBA000149AAG 511FBA000149AAG 74.1758 MHz 511ABA000149BAG 511BBA000149BAG 511FBA000149BAG 74.25 MHz 510ABA74M2500AAG 510BBA74M2500AAG 510FBA74M2500AAG 74.25 MHz 510ABA74M2500BAG 510BBA74M2500BAG 510FBA74M2500BAG 74.25 MHz 511ABA74M2500AAG 511BBA74M2500AAG 511FBA74M2500AAG 74.25 MHz 511ABA74M2500BAG 511BBA74M2500BAG 511FBA74M2500BAG 100 MHz 510ABA100M000AAG 510BBA100M000AAG 510FBA100M000AAG 100 MHz 510ABA100M000BAG 510BBA100M000BAG 510FBA100M000BAG 100 MHz 511ABA100M000AAG 511BBA100M000AAG 511FBA100M000AAG 100 MHz 511ABA100M000BAG 511BBA100M000BAG 511FBA100M000BAG 106.25 MHz 510ABA106M250AAG 510BBA106M250AAG 510FBA106M250AAG 106.25 MHz 510ABA106M250BAG 510BBA106M250BAG 510FBA155M520BAG 106.25 MHz 511ABA106M250AAG 511BBA106M250AAG 511FBA106M250AAG 106.25 MHz 511ABA106M250BAG 511BBA106M250BAG 511FBA106M250BAG Si510 5x7mm 148.5 MHz 155.52 MHz 156.25 MHz 3.3V LVPECL 510ABA148M500AAG 510ABA155M520AAG 510ABA156M250AAG 3.3V LVDS 510BBA148M500AAG 510BBA155M520AAG 510BBA156M250AAG 2.5V LVDS 510FBA148M500AAG 510FBA155M520AAG 510FBA156M250AAG Si510 3.2x5mm 148.5 MHz 155.52 MHz 156.25 MHz 3.3V LVPECL 510ABA148M500BAG 510ABA155M520BAG 510ABA156M250BAG 3.3V LVDS 510BBA148M500BAG 510BBA155M520BAG 510BBA156M250BAG 2.5V LVDS 510FBA148M500BAG 510FBA155M520BAG 510FBA156M250BAG Si511 5x7mm 148.5 MHz 155.52 MHz 156.25 MHz 3.3V LVPECL 511ABA148M500AAG 511ABA155M520AAG 511ABA156M250AAG 3.3V LVDS 511BBA148M500AAG 511BBA155M520AAG 511BBA156M250AAG 2.5V LVDS 511FBA148M500AAG 511FBA155M520AAG 511FBA156M250AAG Si511 3.2x5mm 148.5 MHz 155.52 MHz 156.25 MHz 3.3V LVPECL 511ABA148M500BAG 511ABA155M520BAG 511ABA156M250BAG 3.3V LVDS 511BBA148M500BAG 511BBA155M520BAG 511BBA156M250BAG 2.5V LVDS 511FBA148M500BAG 511FBA155M520BAG 511FBA156M250BAG For customized frequencies: http://www.silabs.com/custom-timing 2 Rev. 0.1 125 MHz 510ABA125M000AAG 510BBA125M000AAG 510FBA125M000AAG 125 MHz 510ABA125M000BAG 510BBA125M000BAG 510FBA125M000BAG 125 MHz 511ABA125M000AAG 511BBA125M000AAG 511FBA125M000AAG 125 MHz 511ABA125M000BAG 511BBA125M000BAG 511FBA125M000BAG 200 MHz 510ABA200M000AAG 510BBA200M000AAG 510FBA200M000AAG 200 MHz 510ABA200M000BAG 510BBA200M000BAG 510FBA200M000BAG 200 MHz 511ABA200M000AAG 511BBA200M000AAG 511FBA200M000AAG 200 MHz 511ABA200M000BAG 511BBA200M000BAG 511FBA200M000BAG 148.3517 MHz 510ABA000110AAG 510BBA000110AAG 510FBA000110AAG 148.3517 MHz 510ABA000110BAG 510BBA000110BAG 510FBA000110BAG 148.3517 MHz 511ABA000110AAG 511BBA000110AAG 511FBA000110AAG 148.3517 MHz 511ABA000110BAG 511BBA000110BAG 511FBA000110BAG 212.5 MHz 510ABA212M500AAG 510BBA212M500AAG 510FBA212M500AAG 212.5 MHz 510ABA212M500BAG 510BBA212M500BAG 510FBA212M500BAG 212.5 MHz 511ABA212M500AAG 511BBA212M500AAG 511FBA212M500AAG 212.5 MHz 511ABA212M500BAG 511BBA212M500BAG 511FBA212M500BAG Si510/Si511 100kHz to 250MHz Crystal Oscillator (XO) Series CONTACT INFORMATION Silicon Laboratories Inc. 400 West Cesar Chavez Austin, TX 78701 Tel: 1+(512) 416-8500 Fax: 1+(512) 416-9669 Toll Free: 1+(877) 444-3032 Please visit the Silicon Labs Technical Support web page: https://www.silabs.com/support/pages/contacttechnicalsupport.aspx and register to submit a technical support request. Patent Notice Silicon Labs invests in research and development to help our customers differentiate in the market with innovative low-power, small size, analog-intensive mixed-signal solutions. Silicon Labs' extensive patent portfolio is a testament to our unique approach and world-class engineering team. The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice. Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting from the use of information included herein. Additionally, Silicon Laboratories assumes no responsibility for the functioning of undescribed features or parameters. Silicon Laboratories reserves the right to make changes without further notice. Silicon Laboratories makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Silicon Laboratories assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Silicon Laboratories products are not designed, intended, or authorized for use in applications intended to support or sustain life, or for any other application in which the failure of the Silicon Laboratories product could create a situation where personal injury or death may occur. Should Buyer purchase or use Silicon Laboratories products for any such unintended or unauthorized application, Buyer shall indemnify and hold Silicon Laboratories harmless against all claims and damages. Silicon Laboratories and Silicon Labs are trademarks of Silicon Laboratories Inc. Other products or brandnames mentioned herein are trademarks or registered trademarks of their respective holders. Rev. 0.1 3