X

V60 Night Hawk®
CCTV Camera
Quick Setup Guide
Contents
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Unpack Everything . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Equipment Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Mounting the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Aiming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Adjusting the Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
External Polarizer (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Cable Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Regulatory Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
FCC Statement (U.S.A.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Industry Canada Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Π. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Overview
The V60 Series CCTV Camera comes fully assembled from the factory. The die-cast
zinc enclosure and tamper-resistant screws make this camera ideal for use in the
most extreme environments.
Before You Begin
Please read this guide carefully before you install
the V60 Series CCTV Camera.
Keep this guide for future reference.
Unpack Everything
Check that the items received match those listed on the order form and packing
slip. The V60 packing box should include, in addition to this Quick Setup Guide:
•
•
•
One camera enclosure
One V60 hardware kit
One Product Warranty Card
If any parts are missing or damaged, please contact the dealer you purchased the
camera from, or call Silent Witness Customer Service (see “Service” on page 6).
Equipment Required
You will require the following tools to complete the installation:
•
•
Phillips screwdriver.
Mounting screws. Use mounting screws appropriate to your installation.
1
Installation
Mounting the Camera
To mount the V60 camera:
1.
Assemble the V60 mounting base following Figure 1.
Note
The insulating shoulder washer and composite washers must
remain installed as shown to ensure that the camera is
electrically isolated from the mounting surface.
Install the L-bracket with the raised points toward the mounting
plate.
Figure 1
Mount Components
Note Raised points
toward mounting
plate
Shoulder
washer
Mounting plate
L-bracket
Composite
washers
Swivel
bracket
Lock washer (x3)
1/4 in. 20 x 5/8 in. Security head screws (x3)
2.
3.
2
Mount the mounting plate to a flat surface on a wall or ceiling, using mounting
screws appropriate to your installation.
Attach the V60 enclosure and power connector to the swivel bracket (see
Figure 2).
Document 920.0092 Rev 2.02 March 11, 2004
Figure 2
Mount Options
Video-
Wall mount
Power Gnd
Line
Audio
Video+
V+
Ceiling mount
Video: female BNC
Audio: RCA plug
Power: 2.1 mm male jack
white stripe
Note
Do not remove retaining screw
from camera enclosure
The optional wall, ceiling, or pedestal mounting bracket shown
in Figure 3 can be ordered for installations that do not require
any pan adjustment. This bracket is particularly useful in mobile
applications where vibration may be a significant factor.
3
Figure 3
Optional Pedestal Mount
Power connector
Flashing LED
(optional)
Enclosure
retaining screw
Camera enclosure
Microphone
(optional)
U-bracket (optional)
Wiring
Your V60 camera comes supplied with a power connector and wiring harness that
allows the camera enclosure to be quickly changed and secured with a single tamper
proof retaining screw.
See Cable Guidelines on page 9 for cable gauge and length recommendations.
1.
Ensure there is enough slack in the wiring harness to adjust the V60 through its
full range of motion.
WARNING! The use of a CSA Certified/UL Listed Class 2
power supply is required to ensure
compliance with electrical safety standards.
2.
Read the voltage and current requirements of your V60 camera on the product
label located on the back of the camera. Connect a suitable power supply to
the black, 2.1 mm male jack on the V60 wiring harness.
For DC powered cameras, the positive voltage must be connected to the
center pin of the jack or to the power wire with the white stripe.
Caution
Severe over-voltage will damage your V60 and void your
warranty.
3.
Connect the V60 video output signal (female BNC connector) to the video
output of a monitor or CCTV system.
4
Document 920.0092 Rev 2.02 March 11, 2004
4.
For V60 cameras with the microphone option installed, connect the audio
output signal (red RCA plug) to the audio input of a monitor or CCTV system.
Aiming
Adjusting the Mounting Bracket
The V60 mounting bracket adjustments are designed to lock in position.
Caution
Always loosen the locking screws before adjusting the
mounting brackets to avoid damaging the locking
mechanisms.
To aim the mounting bracket:
1.
2.
3.
4.
Turn on the camera power and monitor the video signal.
Use the security hex key (supplied) to loosen the mounting bracket locking
screws.
Adjust the pan and tilt angle of the camera to the desired view.
Retighten the locking screws to secure the camera in position.
External Polarizer (Optional)
The optional V60 External Polarizer is a self-adhesive, polarized light filter that can
be mounted on the outside of the V60 camera window. This filter can improve
video image quality by reducing glare and increasing contrast.
Note
Do not use the External Polarizer on V60 Night Hawk cameras.
To install the V60 External Polarizer:
1.
2.
3.
4.
5.
Clean the V60 camera window with isopropyl alcohol and a clean, soft cloth.
Do not remove the adhesive backing from the polarizer at this time. Remove
the clear protective plastic from the front of the polarizer and set aside. Do
not discard. Handle the polarizer by its edges to avoid finger prints.
Position the polarizer on the outside of the V60 camera window, directly over
the viewing center of the camera. Rotate the polarizer to find the orientation
that provides the best video image. Use the flat edge of the polarizer as a
reference.
Replace the clear protective plastic on the front of the polarizer, and then
remove the adhesive backing. Do not touch the adhesive side of the polarizer.
Press the polarizer firmly onto the V60 camera window, in the position and
orientation that gives the best video image.
Remove the clear protective plastic from the polarizer.
5
Routine Maintenance
Use regular, non-abrasive liquid cleaners to remove most dirt and grime.
Caution
Do not use harsh or abrasive cleaners which can scratch
the Lexan window in the enclosure and reduce visibility of
the camera.
Service
Subject to the terms and conditions listed on the Product Warranty Card, during
the warranty period Silent Witness will repair or replace, at its sole option, free of
charge, any defective products returned prepaid.
In the event you have a problem with any Silent Witness product, please call
Customer Service for assistance or to request a Return Authorization (RA)
number.
In the U.S.A. and Canada, call 1.800.893.9513
Or call +1.604.574.1523
Be sure to have the model number, serial number, and the nature of the problem
available for the technical service representative.
Prior authorization must be obtained for all returns, exchanges, or credits. Items
shipped to Silent Witness without a clearly identified Return
Authorization (RA) number may be refused.
6
Document 920.0092 Rev 2.02 March 11, 2004
Specifications
Note
Specifications apply to all camera models, unless noted
otherwise.
Audio/Video Signal Specifications
Pickup device:
Electronic iris:
Video output:
Video signal:
Monochrome
Color
Signal to noise ratio:
Surge suppression:
Light sensitivity:
Monochrome
Color
Desert Hawk (Monochrome)
Desert Hawk (Color)
Resolution TV lines:
Color
Monochrome
Desert Hawk ((Monochrome)
Desert Hawk (Color)
Power Requirements
Voltage and current or power:
Monochrome
Color
Optional power supply:
Monochrome
Color
Desert Hawk (Monochrome/
Color)
1/3 in. CCD
1/60 (1/50) to 1/100,000 sec.
1 V p-p @ 75 Ω
Standard EIA or CCIR
Standard NTSC or PAL
Better than 51 dB
1.5 kW transient
High RES
Standard RES
0.3 lux @ f2.0
0.2 lux @ f2.0
1.0 lux @ f2.0
0.8 lux @ f2.0
0.3 lux @ f2.0
0.2 lux @ f2.0
1.0 lux @ f2.0
0.8 lux @ f2.0
High RES
Standard RES
480
350
570
410
570
410
480
350
11 to 16 VDC, 250 mA maxa
11 to 16 VDC, 900 mA maxa
PSI 4.1
PSI 1.2
PSI 4.1
7
Operating Temperature
Monochrome
Color
Arctic Hawk (Monochrome)
Arctic Hawk (Color)
Desert Hawk (Monochrome)
Desert Hawk (Color)
Size and Weight
Length x width x height (no brackets):
Weight:
Ratings
-13°F to 122°F
(-25°C to 50°C)
-4°F to 122°F
(-20°C to 50°C)
-50°F to 122°F
(-46°C to 50°C)
-50°F to 122°F
(-46°C to 50°C)
High RES
-4°F to 140°F
(-20°C to 60°C)
-4°F to 140°F
(-20°C to 60°C)
2.5 in. x 2.75 in. x 4.5 in.
(64 mm x 70 mm x 114 mm)
2.6 lbs. (1179 g)
FCC Part 15B
Œ
a. Current consumption depends on camera model.
8
Standard RES
-13°F to 140°F
(-25°C to 60°C)
-4°F to 140°F
(-20°C to 60°C)
Document 920.0092 Rev 2.02 March 11, 2004
Cable Guidelines
Maximum Power Supply Cable Length (feet/meters)
Wire gauge
Total
Power
24
22
18
load
supply
AWG
AWG
AWG
Cameras with DC power supplies
150 mA
12 VDC
50/15
100/30
200/61
150 mA
15 VDC
300/91
500/152
1000/305
250 mA
12 VDC
n/r
50/15
100/30
250 mA
15 VDC
200/61
300/91
500/152
300 mA
12 VDC
n/r
n/r
n/r
300 mA
15 VDC
200/61
300/91
500/152
950 mA
12 VDC
n/r
n/r
n/r
950 mA
15 VDC
50/15
100/30
300/91
1150 mA
12 VDC
n/r
n/r
n/r
1150 mA
15 VDC
50/15
100/30
200/61
Line-lock cameras with AC or DC power supplies
2.5 W
24 VAC
50/15
100/30
200/61
2.5 W
15 VDC
200/60
300/90
500/150
4.5 W
24 VAC
n/r
50/15
100/30
4.5 W
15 VDC
200/61
300/91
500/152
n/r = not recommended
Maximum Video Cable Length (feet/meters)
Cable type
RG-59
RG-6
Wire gauge
23 AWG* 18 AWG*
Maximum length (feet/meters)
750/229
1500/457
* Copper clad steel core, 95% braided shield
16
AWG
300/91
1000/305
200/61
1000/305
100/30
1000/305
50/15
500/152
50/15
400/122
300/91
1000/305
200/61
1000/305
RG-11
16 AWG*
2000/610
9
Regulatory Compliance
FCC Statement (U.S.A.)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received including interference that may
cause undesired operation.
Industry Canada Notice
This digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
Cet appareil numérique respecte toutes les exigences du Règlement sur la
matériel brouilleur du Canada.
Œ
The Πmark on the product indicates that the system has been tested to, and
conforms with, the provisions noted within the 89/336/EEC Electromagnetic
Compatibility Directive.
10 Document 920.0092 Rev 2.02 March 11, 2004
www.silentwitness.com
Toll free: 1.888.289.2288
International toll free: 00800.2020.8080
Silent Witness Enterprises Ltd.
Sales:
1.888.289.2288
Tech Service:1.800.893.9513
Phone:
1.604.574.1526
Fax:
1.604.574.7736
Email:
[email protected]
6554 - 176th Street
Surrey, B.C. V3S 4G5
Canada
Document 920.0092 Rev 2.02 March 11, 2004
Specifications subject to change without notice.
Imperial conversions are approximate.
Night Hawk® and Silent Witness® are registered trademarks of Silent Witness Enterprises
Ltd. © 2004 Silent Witness Enterprises Ltd. All rights reserved. Printed in Canada.