データシート

For more information, please visit the product page
|
For information on related products, view External Power Supplies
date
09/12/2013
page
1 of 3
MODEL: PJ-034B │ DESCRIPTION: DC POWER JACK
2.5 mm center pin
2.5 A rating
vertical orientation
through hole
low profile housing with plastic placement pins
U
•
•
•
•
•
ED
FEATURES
SPECIFICATIONS
conditions/description
rated input voltage
rated input current
min
TI
parameter
N
RoHS
contact resistance1
between terminal and mating plug
between terminal in a closed circuit
insulation resistance
at 500 Vdc
voltage withstand
at 50/60Hz for 1 minute
operating temperature
life
flammability rating
RoHS
Note:
units
Vdc
2.5
A
50
30
mΩ
mΩ
MΩ
0.3
any direction for 10 seconds
-25
500
Vac
3
kg
500
g
85
°C
5,000
cycles
O
terminal strength
max
16
100
N
insertion/withdrawal force
typ
UL94V-0
2011/65/EU
1. When measured at a current of less than 100 mA/1 kHz
IS
C
SOLDERABILITY
conditions/description
min
typ
max
units
wave soldering
dipped in solder pot for 5 ±0.5 seconds
255
260
265
°C
D
parameter
cui.com
For more information, please visit the product page
|
For information on related products, view External Power Supplies
CUI Inc │ MODEL: PJ-034B │ DESCRIPTION: DC POWER JACK
date 09/12/2013│ page 2 of 3
MECHANICAL DRAWING
units: mm[inches]
tolerance:
X.X ±0.2mm
X.XX ±0.1mm
X.XXX ±0.05mm
MATERIAL
PLATING
copper
nickel plated
ED
center pin
terminal 1
brass
tin plated
terminal 2
copper alloy
tin plated
terminal 3
brass
tin plated
plastic
PBT
U
23.0 0.906
0.3 (TYP)
18.5 0.728
0.3
5.00 0.197
TI
12.2 0.480
N
10.2 0.402
2.50 0.098
N
6.40 0.252
1
3
2
0.50 0.020
(TYP)
3.0 0.118
0.3 (TYP)
2.70 0.106
(2 PLCS)
O
7.60 0.299
1
7.1 0.280
IS
C
3
8.50 0.335
6.10 0.240
2
2.9 0.114
4.3 0.169
3.0 0.118
1.00 0.039
(3 PLCS)
D
PCB LAYOUT
TOP VIEW
Note:
1
3
2
SCHEMATIC
MATING PLUG
Jack Insertion Depth: 9.5 mm
Model
PJ-034B
Center Pin
Ø2.5 mm
1. All specifications measured at 10~35°C, humidity at 45~85%, under standard atmospheric pressure, unless otherwise noted.
cui.com
For more information, please visit the product page
|
For information on related products, view External Power Supplies
CUI Inc │ MODEL: PJ-034B │ DESCRIPTION: DC POWER JACK
date 09/12/2013│ page 3 of 3
REVISION HISTORY
description
date
1.0
initial release
07/30/2007
1.01
applied new spec template
ED
rev.
09/12/2013
D
IS
C
O
N
TI
N
U
The revision history provided is for informational purposes only and is believed to be accurate.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax 503.612.2383
cui.com
[email protected]
CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a
life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.