8 7 6 5 4 3 ALUMINUM COMPATIBLE LASER WELDABLE NANO DUAL LOBE CONNECTOR 2 SRIND101 DOCUMENT REVISIONS CHANGE NO. DATE REV - INIT RLSE APPROVED ----- J. PETRI • TRADITIONAL CONFIGURATION WITH THE FLANGE LOCATED AT THE MIDSECTION OF THE CONNECTOR D • DESIGNED TO LASER WELD INTO AN ELECTRONIC CHASSIS WALL D • CONFORMS TO MILDTL-32139 AND ARE AVAILABLE IN 9, 15, 21, 25, 31, 37 AND 51 COUNT PIN/SOCKET CONFIGURATIONS. • INCORPORATES BERYLLIUM-COPPER PIN/SOCKETS INDIVIDUALLY SEALED USING CERAMAX® PROPRIETARY CERAMIC TO ESTABLISH A DURABLE HERMETIC SEAL. • THE INTERNAL PINS CAN BE CONFIGURED TO ACCEPT INSULATED WIRE, AUTOMATIC WIRE BONDS, RIBBON WELDS, OR SOLDER CONNECTIONS. 1. LEAK RATE: LESS THAN OR EQUAL TO 1X10E-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. INTERFACE AND MOUNTING HOLES IN ACCORDANCE WITH MIL-DTL-32139/4. C 3. MATERIALS: CONTACT: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B196/197. INSULATOR: CERAMAX PROPRIETARY CERAMIC. WELD FLANGE: ALUMINUM ALLOY 4032 IN ACCORDANCE WITH ASTM B247. C 4. FINISH: CONTACTS: NICKEL PLATE PER QQ-N-290, .000100/.000250 THICK. GOLD PLATE PER ASTM B488, TYPE III, CODE A, .000050/.000100 THICK. PLATE ENTIRE EXPOSED PIN, BOTH ENDS. PLATING IN SOCKETS NOT REQUIRED BENEATH BLEED HOLE. SHELL: CHEMICAL CONVERSION COAT IN ACCORDANCE WITH MIL-C-5541, CLASS 1A OR NONE. 5. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBERS INDICATING PIN COUNT AND CONFIGURATION (SEE SHEET 2+): EXAMPLE: SRIND101 - 25 - A 1 DETAILED CONFIGURATION PIN END STYLE (SEE VIEW A) NUMBER OF CONTACTS, X BASE NUMBER B B UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE 7 6 5 4 3 CONNECTOR, NANO DUAL LOBE, MID-FLANGE, ALUMINUM COMPATIBLE LASER WELDABLE SIZE DOCUMENT A SCALE FORM 300067 REV - (321) 254-4067 WWW.SRIHERMETICS.COM 6:1 2 CAGE CODE SRIND101 3PJY7 SHEET 1 REV - 1 OF 3 A 8 7 6 4 5 3 2 SRIND101 DOCUMENT A .010 W±.002 B .010 D D .185±.002 2X R PIN EXTENSIONS (SEE SH 3) C C .003 MAX BRK ALL AROUND .015±.002 .225 WELD FLANGE .130 INSULATOR (ONE PER CONTACT) Y .001 CONTACT .006 ALL AROUND PIN END STYLE: A-STRAIGHT CUT B-WIREBOND FLAT B .010 .001 B VIEW A .188 .001 .003 MAX BRK ALL AROUND 2XR HOLE DETAIL UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION 7 6 5 4 3 WWW.SRIHERMETICS.COM TITLE CONNECTOR, NANO DUAL LOBE, MID-FLANGE, ALUMINUM COMPATIBLE LASER WELDABLE SIZE DOCUMENT A SCALE FORM 300067 REV - (321) 254-4067 SRI HERMETICS 6:1 2 CAGE CODE SRIND101 3PJY7 SHEET 1 REV - 2 OF 3 A 8 6 7 5 4 STRAIGHT PIN END STYLE, A D 3 2 SRIND101 DOCUMENT WIREBOND FLAT PIN END STYLE, B PIN EXTENSION A, B PIN EXTENSION A, B D .015 .005 FLAT .005 MIN THICK .012 MIN WIDE C C PART NUMBER SRIND101 - X - A 1 A .110 PART NUMBER SRIND101 - X - B 1 SRIND101 - X - B 2 B .110 A .060 .040 B .040 .060 B B UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION TITLE 7 6 5 4 3 WWW.SRIHERMETICS.COM CONNECTOR, NANO DUAL LOBE, MID-FLANGE, ALUMINUM COMPATIBLE LASER WELDABLE SIZE DOCUMENT A SCALE FORM 300067 REV - (321) 254-4067 SRI HERMETICS 6:1 2 CAGE CODE SRIND101 3PJY7 SHEET 1 REV - 3 OF 3 A