8 7 6 5 4 2 3 STEEL COMPATIBLE LASER WELDABLE NANO DUAL LOBE CONNECTOR DOCUMENT REV DCN REVISIONS REVISION DATE - INTL RELEASE 10/10/2014 SRIND105 RELEASE APPROVAL Jim Petri 2015.03.16 10:59:01 -04'00' • TRADITIONAL CONFIGURATION WITH THE FLANGE LOCATED AT THE MIDSECTION OF THE CONNECTOR D • DESIGNED TO LASER WELD INTO AN ELECTRONIC CHASSIS WALL D • CONFORMS TO MIL-DTL-32139/2 AND ARE AVAILABLE IN 9, 15, 21, 25, 31, 37 AND 51 COUNT PIN/SOCKET CONFIGURATIONS. • INCORPORATES BERYLLIUM-COPPER PIN/SOCKETS INDIVIDUALLY SEALED USING CERAMAX® PROPRIETARY CERAMIC TO ESTABLISH A DURABLE HERMETIC SEAL. • THE INTERNAL PINS CAN BE CONFIGURED TO ACCEPT INSULATED WIRE, AUTOMATIC WIRE BONDS, RIBBON WELDS, OR SOLDER CONNECTIONS. 1. LEAK RATE: LESS THAN OR EQUAL TO 1X10E-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. INTERFACE AND MOUNTING HOLES IN ACCORDANCE WITH MIL-DTL-32139/2. C 3. MATERIALS: CONTACT: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B196/197. INSULATOR: CERAMAX PROPRIETARY CERAMIC. WELD FLANGE: STAINLESS STEEL ALLOY 304L IN ACCORDANCE WITH QQ-S-763. C 4. FINISH: CONTACTS: NICKEL PLATE PER QQ-N-290, .000100/.000250 THICK. GOLD PLATE PER ASTM B488, TYPE III, CODE A, .000050/.000100 THICK. PLATE ENTIRE EXPOSED PIN, BOTH ENDS. PLATING IN SOCKETS NOT REQUIRED BENEATH BLEED HOLE. SHELL: PASSIVATED. 5. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBERS INDICATING PIN COUNT AND CONFIGURATION (SEE SHEET 2+): EXAMPLE: SRIND105 - 25 - A 1 DETAILED CONFIGURATION PIN END STYLE (SEE VIEW A) NUMBER OF CONTACTS, X BASE NUMBER B B UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE CONNECTOR, NANO DUAL LOBE, MF LASER WELDABLE SIZE DOCUMENT A SCALE FORM 300067 REV - 7 6 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM 6:1 2 CAGE CODE SRIND105 3PJY7 SHEET 1 REV - 1 OF 3 A 6 7 8 4 5 2 3 DOCUMENT SRIND105 W .002 A±.010 D D .153±.002 2X R PIN EXTENSIONS (SEE SH 3) INSULATOR (ONE PER CONTACT) C .003 MAK BRK ALL AROUND .015±.002 .225 C WELD FLANGE .130 PIN END STYLE: A-STRAIGHT CUT B-WIREBOND FLAT B CONTACT Y .001 VIEW A .156 .001 NUMBER OF CONTACTS A .003 MAX BRK ALL AROUND 2XR W Y 9 .577 .580 15 .727 .730 21 .877 .880 25 .977 .980 31 1.127 1.130 37 1.277 1.280 51 1.627 1.630 SUGGESTED HOLE DETAIL UNLESS OTHERWISE SPECIFIED DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS 7 6 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM TITLE CONNECTOR, NANO DUAL LOBE, MF LASER WELDABLE SIZE DOCUMENT A SCALE FORM 300067 REV - B .010 .001 .006±.001 ALL AROUND 6:1 2 CAGE CODE SRIND105 3PJY7 SHEET 1 REV - 2 OF 3 A 8 6 7 5 4 STRAIGHT PIN END STYLE, A D 2 3 DOCUMENT SRIND105 WIREBOND FLAT PIN END STYLE, B PIN EXTENSION A PIN EXTENSION A D .015 .005 FLAT .005 MIN THICK .012 MIN WIDE C C PART NUMBER SRIND105 - X - A 1 A .065 PART NUMBER SRIND105 - X - B 1 A .060 B B UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE CONNECTOR, NANO DUAL LOBE, MF LASER WELDABLE SIZE DOCUMENT A SCALE FORM 300067 REV - 7 6 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM 6:1 2 CAGE CODE SRIND105 3PJY7 SHEET 1 REV - 3 OF 3 A