FG 501T Window Wall JUNE, 2015 FEATURES Features • FG 501T Window Wall is an inside glazed system • 2-1/4" (57.2) sight line with standard 5" (127) system depth • IsoLockTM lanced pour and debridged 3/8" (9.5) thermal break • Screw spline fabrication and joinery • Standard infill option 1" (25.4) • Silicone compatible glazing materials for long lasting seals • Inside and outside corner members are available for 90° and 135° applications • Incorporates expansion verticals as required • Permanodic™ anodized finishes in seven choices • Painted finishes in standard and custom choices Optional Features • Integrates with Kawneer GLASSvent™ UT Windows • Entrance and balcony door options • Strap anchors • Optional slab edge covers (Extruded / ACM panel) • Outside glazed option • Heavy weight mullions • Steel reinforcing • Head receptor reinforcing clip • Wedge gasket at interior head receptor stop • Profit$MakerTM plus die sets available Product Applications • Ribbon windows • Ideal for single and multi-lite punched openings © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. EC 97911-075 For specific product applications, Consult your Kawneer representative. kawneer.com ADMD220 1 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. FG 501T Window Wall BLANK PAGE ADMD220 kawneer.com © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 2 JUNE, 2015 EC 97911-075 FG 501T Window Wall JUNE, 2015 3 INDEX EC 97911-075 Architects – Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modified to expand design flexibility. Please contact your Kawneer representative for further assistance. LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR. Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted. © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. PICTORIAL VIEW ..................................................................................4 FRAMING DETAILS ........................................................................... 5-7 SLAB EDGE COVER DETAILS ..........................................................8, 9 2000T TERRACE DOOR DETAILS ...............................................10, 11 CORNER DETAILS ...............................................................................12 GLASSvent™ UT WINDOW DETAILS.................................................13 MISCELLANEOUS DETAILS................................................................14 WIND LOAD/DEADLOAD CHARTS .............................................. 15-18 THERMAL CHARTS........................................................................ 19-22 The following metric (SI) units are found in these details: m –meter cm – centimeter mm –millimeter s –second Pa –pascal MPa –megapascal Kawneer reserves the right to change configurations without prior notice when deemed necessary for product improvement. kawneer.com ADMD220 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. FG 501T Window Wall PICTORIAL VIEW ADMD220 kawneer.com © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 4 JUNE, 2015 EC 97911-075 7/8" (22) 2-1/2" (64) © Kawneer Company, Inc., 2015 2-1/4" (57) Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 1-5/8" (41) 2" (51) Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. JUNE, 2015 kawneer.com FG 501T Window Wall EC 97911-075 RIBBON FRAMING DETAILS SCALE 3" = 1'-0" 1 4 5 6 2 3 ELEVATION IS NUMBER KEYED TO DETAILS INSIDE GLAZED 1 5" (127) ADMD220 4 5 2-1/4" (57) 2-1/4" (64) 2 6 3 3" (76) 5 7/8" (22) 2-1/2" (64) 2-1/4" (57) SCALE 3" = 1'-0" 4 5 6 2 3 ELEVATION IS NUMBER KEYED TO DETAILS OUTSIDE GLAZED 1 5" (127) ADMD220 4 5 2-1/4" (57) 2-1/4" (64) Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. RIBBON FRAMING DETAILS 2 6 3 3" (76) Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 2" (51) FG 501T Window Wall kawneer.com © Kawneer Company, Inc., 2015 1-5/8" (41) 6 JUNE, 2015 EC 97911-075 1 7/8" (22) 2-1/2" (64) © Kawneer Company, Inc., 2015 2-1/4" (57) Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 1-5/8" (41) 2" (51) Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. JUNE, 2015 kawneer.com FG 501T Window Wall EC 97911-075 PUNCHED OPENING FRAMING DETAILS SCALE 3" = 1'-0" 1 4 5 2 3 ELEVATION IS NUMBER KEYED TO DETAILS INSIDE GLAZED 4 1 5" (127) 2-1/4" (57) 2 5 3 2-1/4" (64) HEAD AND SILL SHOWN WITH OPTIONAL STRAP ANCHOR ADMD220 7 1-1/2" (38) 2" (51) 1/2" (13) 1/2" (13) 1-1/8" (29) 1-1/8" (29) 2-1/2" (64) 2-1/2" (64) 2-PIECE SILL RECEPTOR STANDARD SILL RECEPTOR WITH 7" SLAB COVER (8" SLAB COVER SIMILAR) ADMD220 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1/2" (13) 1-3/4" (44) 1/2" (13) 1-3/4" (44) SILL RECEPTOR 6-1/4" or 7-1/4" (159) or (184) 7" or 8" (178) or (203) 6-1/4" or 7-1/4" (159) or (184) 7" or 8" (178) or (203) SLAB EDGE COVER DETAILS 2-PIECE SILL RECEPTOR WITH 7" SLAB COVER (8" SLAB COVER SIMILAR) kawneer.com © Kawneer Company, Inc., 2015 1-1/2" (38) 2" (51) FG 501T Window Wall Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 1-5/8" (41) 1-5/8" (41) 8 JUNE, 2015 EC 97911-075 SCALE 3" = 1'-0" SLAB EDGE COVERS (INSIDE GLAZED SHOWN, OUTSIDE GLAZED SIMILAR) © Kawneer Company, Inc., 2015 kawneer.com 1-1/2" (38) 2" (51) 1-1/2" (38) 2" (51) 1/2" (13) 1/2" (13) 1/2" (13) 1-3/4" (44) 1/2" (13) 1-3/4" (44) 1-1/8" (29) 1-1/8" (29) 2-1/2" (64) 2-1/2" (64) EC 97911-075 STANDARD SILL RECEPTOR WITH ACM PANEL VARIABLE SLAB COVER ADMD220 VARIES VARIES VARIES VARIES Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. SILL RECEPTOR 1-5/8" (41) 1-5/8" (41) Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. JUNE, 2015 FG 501T Window Wall SLAB EDGE COVER DETAILS VARIABLE SLAB EDGE COVERS (INSIDE GLAZED SHOWN, OUTSIDE GLAZED SIMILAR) 5" (127) 5" (127) 2-PIECE SILL RECEPTOR 2-PIECE SILL RECEPTOR WITH ACM PANEL VARIABLE SLAB COVER 9 2 23/32" (18.3) 3/8" (9.5) OPTIONAL SILL 4-13/32" (111.9) FRAME WIDTH PIVOT JAMB 3 ADMD220 4-13/32" (111.9) FRAME HEIGHT 4-13/32" (111.9) 1" (25.4) 1-25/32" (45.2) 3 1-25/32" (45.2) 1" (25.4) 4-13/32" (111.9) FRAME WIDTH 4 2 OUTSWING DOORS & FRAME 4" (101.6) 1-25/32" (45.2) 1" (25.4) 23/32" (18.3) 3/8" (9.5) LOCK JAMB AT DEADBOLT/LATCHLOCK 4 kawneer.com Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 2000T TERRACE DOOR DETAILS © Kawneer Company, Inc., 2015 4-13/32" (111.9) 1/8" (3.2) 23/32" (18.3) FG 501T Window Wall Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 3/8" (9.5) 1" (25.4) 1-25/32" (45.2) 2 5-1/8" (130.2) 1 5-1/8" (130.2) FRAME HEIGHT HEAD 1/2" (12.7) 23/32" (18.3) SILL FRAME HEIGHT 10 JUNE, 2015 EC 97911-075 SCALE 3" = 1' 0" 1 © Kawneer Company, Inc., 2015 kawneer.com 4-13/32" (111.9) 3-11/32" (84.9) 3-13/32" (86.5) 3-11/32" (84.9) 1-25/32" (45.2) 1" (25.4) 23/32" (18.3) 1/8" (3.2) 1 1-25/32" (45.2) 1" (25.4) 5-1/8" (130.2) 5-1/8" (130.2) 2 FRAME HEIGHT SILL FRAME HEIGHT Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. HEAD 23/32" (18.3) 1/2" (12.7) Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. JUNE, 2015 FG 501T Window Wall EC 97911-075 3 23/32" (18.3) 3/8" (9.5) 4-13/32" (111.9) 4-13/32" (111.9) 1" (25.4) 1-25/32" 3-11/32" (84.9) (45.2) 5-1/8" (130.2) 3-11/32" (84.9) FRAME WIDTH PIVOT JAMB 3 4 ADMD220 23/32" (18.3) 1" (25.4) 1-25/32" (45.2) FRAME WIDTH 5-1/8" (130.2) 3/8" (9.5) LOCK JAMB AT DEADBOLT/LATCHLOCK 11 2000T TERRACE DOOR DETAILS SCALE 3" = 1'-0" 1 4 2 INSWING DOORS & FRAME 2" (1 14 ) 2-1/4" (57) 7-1/4" (184) 90° OUTSIDE CORNER 90° INSIDE CORNER 2-7/16" (62) 4-1/2" (114) 135° OUTSIDE CORNER 135° INSIDE CORNER ADMD220 kawneer.com © Kawneer Company, Inc., 2015 CORNER DETAILS Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 7-1/4" (184) FG 501T Window Wall Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 1/ 4- 12 JUNE, 2015 EC 97911-075 SCALE 3" = 1'-0" kawneer.com 1/8" (3) 1/8" (3) 2 1/4" (57) 1 13/16" (46) 2-1/4" (57) 1-13/16" (46) 2-1/4" (57) 1-13/16" (46) 2 ADMD220 2-1/4" (57) 1-13/16" (46) 1/8" (3) 1/8" (3) SCALE 3" = 1'-0" WD DLO WD DLO Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. EC 97911-075 WD DLO WD DLO © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. JUNE, 2015 FG 501T Window Wall 3 ELEVATION IS NUMBER KEYED TO DETAILS 1/8" (3) GLASSvent™ UT WINDOWS SHOWN WITH INSIDE GLAZED FRAMING MEMBERS, OUTSIDE GLAZED SIMILAR 1 1-13/16" (46) 2-1/4" (57) HEAD SILL 4 13 GLASSvent™ UT WINDOWS DETAILS PROJECT-OUT WINDOW SHOWN CASEMENT OUTSWING ALSO AVAILABLE 1 5 2 JAMB 5 4 WD DLO 5 HEAD 3 SILL 14 FG 501T Window Wall JUNE, 2015 MISCELLANEOUS DETAILS EC 97911-075 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. SCALE 3" = 1'-0" HEAVY STOP REINFORCING CLIP HEAD WITH REINFORCING CLIP (INSIDE OR OUTSIDE GLAZED) HEAD WITH BLIND POCKET (INSIDE GLAZED ONLY) 2-1/4" (57) 5" (127) STRAP ANCHOR AT HEAD 3" (76) STRAP ANCHOR AT SILL 2-1/4" (57) 2-1/4" (57) HEAVY MULLION HEAVY MULLION W/ STEEL REINFORCING 3" (76) EXPANSION MULLION W/ STEEL REINFORCING (INSIDE GLAZED SHOWN, OUTSIDE GLAZED SIMILAR) ADMD220 kawneer.com © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. HORIZONTAL WITH BLIND APPLICATION (INSIDE GLAZED ONLY) JUNE, 2015 FG 501T Window Wall EC 97911-075 WIND LOAD / DEADLOAD CHARTS 15 Mullions are designed for deflection limitations in accordance with AAMA TIR-A11 of L/175 up to 13'-6" and L/240 +1/4" above 13'-6". These curves are for mullions WITH HORIZONTALS and are based on engineering calculations for stress and deflection. Allowable wind load stress for ALUMINUM 15,152 psi (104MPa), STEEL 30,000 psi (207MPa.). Charted curves, in all cases are for the limiting value. Wind load charts contained herein are based upon nominal wind load utilized in allowable stress design. To convert ultimate wind loads to nominal loads, multiply ultimate wind loads by a factor of 0.6 per ASCE/SEI 7. A 4/3 increase in allowable stress has not been used to develop these curves. For special situations not covered by these curves, contact your Kawneer representative for additional information. DEADLOAD CHARTS Horizontal or deadload limitations are based upon 1/8" (3.2), maximum allowable deflection at the center of an intermediate horizontal member. The accompanying charts are calculated for 1" (25.4) thick insulating glass or 1/4" (6.4) thick glass supported on two setting blocks placed at the loading points shown. © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. WIND LOAD CHARTS kawneer.com ADMD220 FG 501T Window Wall JUNE, 2015 WIND LOAD CHARTS EC 97911-075 A = 15 PSF (720) B = 20 PSF (960) C = 30 PSF (1440) D = 40 PSF (1920) E = 45 PSF (2160) WITH HORIZONTALS WITHOUT HORIZONTALS MULLION CENTERS IN METERS 1.0 11 A 10 B 9 3.0 C 8 D E 7 6 2.0 182003/182101 0 1 2 3 4 5 6 7 8 14 12 A = 15 PSF (720) B = 20 PSF (960) C = 30 PSF (1440) D = 40 PSF (1920) E = 50 PSF (2400) WITH HORIZONTALS 8 7 3.0 2.0 6 0 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET WITHOUT HORIZONTALS MULLION CENTERS IN METERS 1.0 2.0 2.0 A 11 B 10 3.0 C 9 8 D 7 6 E 0 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET 2.0 14 MULLION HEIGHT IN FEET 12 MULLION HEIGHT IN METERS 4.0 13 182003/182102 WINDLOAD CHARTS ARE BASED ON COMPOSITE PROPERTIES WHICH ARE CALCULATED IN ACCORDANCE WITH AAMA TIR-A8 AND AAMA 505 ADMD220 13 A 12 B 11 C 10 D E 9 8 7 3.0 2.0 6 5 4.0 0 1 2 3 4 5 6 7 MULLION HEIGHT IN METERS 15 14 MULLION HEIGHT IN FEET C D E 9 5 15 5 B 10 MULLION CENTERS IN METERS 1.0 A 11 WINDLOAD CHARTS ARE BASED ON COMPOSITE PROPERTIES WHICH ARE CALCULATED IN ACCORDANCE WITH AAMA TIR-A8 AND AAMA 505 MULLION CENTERS IN FEET 4.0 13 MULLION HEIGHT IN METERS 12 MULLION HEIGHT IN FEET 4.0 MULLION HEIGHT IN METERS MULLION HEIGHT IN FEET 14 13 5 2.0 15 8 MULLION CENTERS IN FEET kawneer.com © Kawneer Company, Inc., 2015 2.0 15 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1.0 MULLION CENTERS IN METERS Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 16 FG 501T Window Wall JUNE, 2015 WIND LOAD CHARTS EC 97911-075 A = 15 PSF (720) B = 20 PSF (960) C = 30 PSF (1440) D = 40 PSF (1920) E = 50 PSF (2400) WITH HORIZONTALS WITHOUT HORIZONTALS 2.0 1.0 4.0 12 A 11 B 3.0 10 C 9 8 D 7 6 E 0 1 2 3 4 5 6 7 2.0 2" x 1/2" STEEL BAR 182003/182102 WITH 2" X 1/2" STEEL BAR MULLION CENTERS IN FEET A = 15 PSF (720) B = 20 PSF (960) C = 30 PSF (1440) D = 40 PSF (1920) E = 50 PSF (2400) 14 11 3.0 E 8 7 2.0 6 0 1 2 3 4 5 6 7 8 WITHOUT HORIZONTALS MULLION CENTERS IN METERS 1.0 2.0 13 4.0 B 12 11 C 10 D E 9 3.0 8 7 2.0 6 0 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET 182133/182134 WINDLOAD CHARTS ARE BASED ON COMPOSITE PROPERTIES WHICH ARE CALCULATED IN ACCORDANCE WITH AAMA TIR-A8 AND AAMA 505 ADMD220 14 A 13 B 12 4.0 C 11 D 10 E 9 3.0 8 7 2.0 6 5 0 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET MULLION HEIGHT IN METERS A MULLION HEIGHT IN FEET 15 MULLION HEIGHT IN METERS MULLION HEIGHT IN FEET D 9 2.0 14 kawneer.com C 10 MULLION CENTERS IN FEET 15 5 4.0 B 12 MULLION CENTERS IN METERS 1.0 A 13 5 WINDLOAD CHARTS ARE BASED ON COMPOSITE PROPERTIES WHICH ARE CALCULATED IN ACCORDANCE WITH AAMA TIR-A8 AND AAMA 505 8 2.0 15 MULLION HEIGHT IN METERS 14 13 MULLION HEIGHT IN METERS MULLION HEIGHT IN FEET 15 MULLION HEIGHT IN FEET 1.0 MULLION CENTERS IN METERS WITH HORIZONTALS © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. MULLION CENTERS IN METERS 5 17 HEIGHT IN FEET 182111 0 0 0 0 1 1 2 2 3 3 4 4 5 5 182112 (1" INFILL) (1" INFILL) WIDTH IN METERS WIDTH IN METERS 13 2.0 13 6 1.0 6 7 7 1.0 12 12 11 11 3.0 7 6 2.0 5 4 3 1.0 2 B 1 8 10 7 6 4 3 2 0 WIDTH IN FEET 9 8 2.0 5 ADMD220 0 1 2 3 2.0 10 9 3.0 8 7 6 2.0 5 4 3 2 B 1.0 1 4 5 6 7 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DEAD LOAD CHARTS HEIGHT IN METERS FG 501T Window Wall 182116 WIDTH IN METERS (1" INFILL) 13 2.0 12 11 3.0 B 1.0 1 WIDTH IN FEET 8 kawneer.com © Kawneer Company, Inc., 2015 8 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 9 HEIGHT IN FEET 10 HEIGHT IN METERS 1.0 HEIGHT IN METERS HEIGHT IN FEET 18 JUNE, 2015 EC 97911-075 A = 1/4 POINT LOADING B = 1/8 POINT LOADING WIDTH IN FEET 8 FG 501T Window Wall JUNE, 2015 19 THERMAL CHARTS EC 97911-075 Generic Project Specific U-factor Example Calculation (Percent of Glass will vary on specific products depending on sitelines) (Based on single bay of Window Wall) 15'-8" Frame Width 2'-0" D.L.O. 9'-6" Frame Height 7'-0" D.L.O. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 5'-0" D.L.O. Example Glass U-Factor = 0.42 Btu/hr x ft2 x °F Total Daylight Opening = 3(5' x 7') + 3(5' x 2') = 135 ft2 Total Projected Area= (Total Daylight Opening + Total Area of Framing System) = 15'-8" x 9'-6" = 148.83 ft2 Percent of Glass = (Total Daylight Opening ÷ Total Projected Area) = (135 ÷ 148.83)100 = 91% System U-Factor vs Percent of Glass Area 0.75 0.70 0.65 E n) PL ig M es A rD EX Fo (N COG U-Factor 0.48 0.46 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.22 0.20 © Kawneer Company, Inc., 2015 0.60 ot 0.55 0.50 0.45 0.40 0.35 0.30 0.25 Vision Area / Total Area % Based on 91% glass and center of glass U-Factor of 0.42 System U-Factor is equal to 0.49 Btu/hr x ft2 x °F kawneer.com ADMD220 70 75 80 85 90 91% 0.20 95 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 0.80 0.49 FG 501T Window Wall JUNE, 2015 THERMAL CHARTS COG U-factor 0.48 (2.72) 0.46 (2.61) 0.44 (2.50) 0.42 (2.39) 0.40 (2.27) 0.38 (2.16) 0.36 (2.05) 0.34 (1.93) 0.32 (1.82) 0.30 (1.71) 0.28 (1.59) 0.26 (1.48) 0.24 (1.37) 0.22 (1.25) 0.20 (1.14) 0.18 (1.02) 0.16 (0.91) 0.14 (0.79) 0.12 (0.68) 0.10 (0.57) Vision Area / Total Area % Notes for System Y-Factor, Shgc and VT charts: For glass values that are not listed, linear interpolation is permitted. Glass properties are base on center of glass values and are obtained from your glass supplier. ADMD220 kawneer.com © Kawneer Company, Inc., 2015 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. System U-Factor vs Percent of Glass Area System U-Factor (Btu/hr x ft2 x °F) Note: Values in parentheses are metric. COG=Center of Glass. Charts are generated per AAMA 507. EC 97911-075 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 20 System VT © Kawneer Company, Inc., 2015 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. System SHGC Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. JUNE, 2015 kawneer.com FG 501T Window Wall EC 97911-075 COG SHGC COG VT Vision Area / Total Area % (Total Daylight Opening / Projected Area) ADMD220 21 THERMAL CHARTS System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area Vision Area / Total Area % (Total Daylight Opening / Projected Area) Charts are generated per AAMA 507 Visible Transmittance (VT) vs Percent of Vision Area FG 501T Window Wall JUNE, 2015 THERMAL PERFORMANCE MATRIX (NFRC SIZE) EC 97911-075 Overall U-Factor 4 0.48 0.58 0.46 0.56 0.44 0.55 0.42 0.53 0.40 0.52 0.38 0.50 0.36 0.49 0.34 0.47 0.32 0.46 0.30 0.44 0.28 0.43 0.26 0.41 0.24 0.39 0.22 0.38 0.20 0.36 0.18 0.34 0.16 0.33 0.14 0.31 0.12 0.30 0.10 0.28 NOTE:For glass values that are not listed, linear interpolation is permitted. 1. 2. 3. 4. SHGC Matrix 2 U-Factors are determined in accordance with NFRC 100. SHGC and VT values are determined in accordance with NFRC 200. Glass properties are based on center of glass values and are obtained from your glass supplier. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of 2000mm wide by 2000mm high (78-3/4" by 78-3/4"). Visible Transmittance 2 Glass SHGC 3 Overall SHGC 4 Glass VT 3 Overall VT 4 0.75 0.65 0.75 0.64 0.70 0.61 0.70 0.59 0.65 0.57 0.65 0.55 0.60 0.52 0.60 0.51 0.55 0.48 0.55 0.47 0.50 0.44 0.50 0.42 0.45 0.40 0.45 0.38 0.40 0.35 0.40 0.34 0.35 0.31 0.35 0.30 0.30 0.27 0.30 0.25 0.25 0.23 0.25 0.21 0.20 0.18 0.20 0.17 0.15 0.14 0.15 0.13 0.10 0.10 0.10 0.08 0.05 0.06 0.05 0.04 ADMD220 kawneer.com © Kawneer Company, Inc., 2015 Glass U-Factor 3 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. Thermal Transmittance 1 (BTU/hr • ft 2 • °F) Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 22