Winchester Electronics Presents... 3345 Series RCA Connectors 75 Ohm Product Benefits 75 Ohm impedance Field installable Full crimp design Designed for Analog & Digital cables Specifications Electrical Impedance Voltage Rating Return Loss Insulation Resistance Environmental 75 Ohms 500 Volts RMS Less than -20 dB to 300 MHz 5000 megohms Mechanical Center Contact Retention Corrosion (salt spray) Flammability 6 lbs. Minimum Finishes Body Center Conductor Thermal Shock Moisture Resistance Vibration Solvent Resistance Nickel 50 millionths inch gold plating over nickel over copper plate -65°C to +165°C 0 to 95% MIL-STD-202, Method 106 MIL-STD-202, Method 101 Test Condition B UL 94-VO Rated (Center Conductor Insulator) MIL-STD-202, Method 204 Test Condition B MIL-STD-202, Method 215 Return Loss Outline Drawing (Plug) March 2009 www.winchesterelectronics.com RCA Connectors - 75 Ohm KINGS Part No. (75 Ohm) FOR CABLES* Belden West Penn/ CDT Gepco 3345-1-9 1505A 1506A 9259 819 25819 815 3345-2-9 1694A 1695A 3345-3-9 1855A 1865A 3345-4-9 1279R 1279P CABLING Crimp Die (KTH-1000) Crimp Die (KTH-5000) Trim Code VPM2000 VPM2000TS VE61859M KTH-2261 KTH-5003 3-661-1 6350 256350 WP6355 VSD2000 VSD2001TS KTH-2255 KTH-5003 3-661-1 HD825 HD25825 WP8255 WP258255 VDM230 VDM250 KTH-2025 KTH-5003 3-661-1 KTH-2276 KTH-5001 3-661-1 Others *Consult factory for cables not listed Trim Code A B C 3-661-1 .624 .312 .155 Dimensions in inches Note: Connectors are designed for use on both analog and digital cable. Consult your cable manufacturer for cable performance data. Connecting Innovation to Application® 62 Barnes Industrial Road North Wallingford, CT 06492 Phone: (203) 741-5400 • Fax: (203) 741-5500 Customer Service (803) 909-5000