® Q D S I N T E R FA C E .532 MIN .337 .333 .007 MAX SLOTS REQUIRED, DESIGN OF SLOTS OPTIONAL Ø.194 MIN 1.00 REF Ø.276 MIN Ø .627 .625 .623 Ø .619 SEE NOTE 1 .251 .191 .337 .307 .309 MIN .007 MIN .040 .003 .415 Ø .411 Ø.485 MIN Ø.272 MAX Ø.190 MAX Ø.374 MAX .124 Ø.119 .093 MIN .050 MAX .124 Ø .119 .092 Ø .090 .303 .273 .309 MAX REF PLANE .300 MIN REF PLANE Note 1. The ID of contact fingers when inserted into Ø.411 ID max test ring shall be Ø.377 min. ELECTRICAL Nominal Impedance Frequency Range Voltage Rating Dielectric Withstanding Voltage Insulation Resistance VSWR MECHANICAL Mating Characteristics Connector Durability Cable Attachement ENVIRONMENTAL 50 ohms DC to 6 GHz 1,000 volts rms 3,000 volts rms 5,000 megohms 1.35 max DC - 6 GHz Temperature Rang: Vibration Shock Moisture Resistance Corrosion (salt spray) -67°Fto +390°F (-55°C to +199°C) MIL-STD-202 Method 204 (Test Cond. B) MIL-STD-202 Method 213 (Test Cond. I) MIL-STD-202 Method 106 MIL-STD-202 Method 101 Test Cond. B) per TRU standards (ref MIL-C-18867A) 500 cycles min. Clamp MATERIALS / FINISHES Body Contacts (Inner) Contacts (Outer) Contacts (Slotted) Insulators Gaskets & Seals Brass, Silver or Nickel Plated Female: Beryllium Copper, Silver or Gold Plated Male: Brass, Silver or Gold Plated Brass, Silver or Nickel Plated Beryllium, Silver or Nickel Plated Teflon Silicone Rubber TRU Corporation 245 Lynnfield Street, Peabody, MA 01960 1-800-COAX-TRU (1-800-262-9878) www.trucorporation.com