3mm Advanced Super Flux LEDs 38-01-A84-RAC-D4T1U1DH-AM Feature ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ Lead-Free RoHS compliant. Low profile. Uniform color High flux output Colorless clear resin. Brightness: 7150 to 14250 mlm at 70mA. Qualification according to AEC-Q101. Packaged in tubes for use with automatic insertion equipment. Useable in severe lead free processes with automotive reflow profile. Compliance with EU REACH. Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm). Applications ‧ ‧ ‧ ‧ ‧ ‧ Automotive exterior lighting: Turn light, tail light, rear-view mirror light, side light, license light switch, 3rd braking light… etc. Display for indoor and outdoor application. Substitution of traditional light. Electronic Signs and Signals. General applications. Device Selection Guide Chip Emitted Color Resin Color Red Water Clear Material AlGaInP 1 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM Table of Content Page Product Nomenclature 3 Absolute Maximum Ratings (Ta=25℃) 4 Electro-Optical Characteristics (Ta=25℃) 5 Bin Range of Dominant Wavelength (Ta=25℃) 6 Bin Range of Forward Voltage (Ta=25℃) 7 Bin Range of Total Flux (Ta=25℃) 8 Typical Electro-Optical Characteristics Curves 9 Package Dimensions 11 Antistatic Packing Materials Tube and Standard Boxes 12 Lable Explanation 12 Precautions 13 Revision History 16 2 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM Product Nomenclature 38 - 01 1 - 2 A8 4 3 4 - RA C 5 6 - D4 T1U1 D H AM 7 8 9 10 11 The product name is designated as below: 1. Product type 2. Lead-frame type 3. Angle 4. Product pasted without Zener 5. Chip code 6. Resin color 7. Wavelength 8. Power &Luminous Intensity 9. Range of Forward Voltage specification 10. Operation current 11 Application 3 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Continuous Forward Current IF 70 mA Power Dissipation Pd 200 mW LED Junction Temperature Tj 120 ℃ Operating Temperature Topr -40 ~ +100 ℃ Storage Temperature Tstg -40 ~ +110 ℃ Thermal Resistance Rth J-A 150 K/W ESDHBM 4000 ESDMM 200 Electrostatic Discharge Soldering Temperature(T=5 sec) 4 Revision Tsol V Wave Soldering : 260 ℃ for 5 sec. Hand Soldering : 350 ℃ for 3 sec. Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Total Flux Φv 7150 --- 14250 Peak Wavelength λp ----- 631 ----- Dominant Wavelength λd 620 ----- Δλ ----- 18 Viewing Angle 2θ1/2 ----- Forward Voltage VF Reverse Current IR Spectrum Radiation Bandwidth Unit mlm Condition IF =70mA nm IF =70mA nm IF =70mA ----- nm IF =70mA 40 ----- deg IF =70mA 1.9 ----- 2.9 V IF =70mA ----- ----- 10 μA VR =5V 632 Note: 1. Tolerance of Total Flux: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 5 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM Bin Range of Forward Voltage Bin Min. Max. 1 1.9 2.1 2 2.1 2.3 3 2.3 2.5 4 2.5 2.7 5 2.7 2.9 Unit Condition V IF =70mA Note: Tolerance of Forward Voltage: ±0.1V 6 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM Bin Range of Dominant Wavelength Bin Min. Max. 2 620 624 3 624 628 4 628 632 Unit Condition nm IF =70mA Note: Tolerance of Dominant Wavelength: ±1nm 7 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM Bin Range of Total Flux Bin Min. Max. T1 7150 9000 T2 9000 11250 U1 11250 14250 Unit Condition mlm IF =70mA Note: Tolerance of Total Flux: ±11% 8 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM Typical Electro-Optical Characteristics Curves Typical Curve of Spectral Distribution Relative Intensity(％) 100 50 0 500 550 600 650 700 750 Wavelength(nm) Note: V(λ)=Standard eye response curve; IF =20mA Relative Intensity Diagram Characteristics of Radiation View Angle 9 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM Forward Current vs. Forward Voltage (Ta=25℃) Dominant Wavelength vs. Forward Current (Ta=25℃) 100 90 625 Dominant Wavelength (nm) Forward Current (mA) 80 70 60 50 40 30 20 10 0 1.7 1.9 2.1 2.3 2.5 2.7 624 623 622 621 620 619 0 10 20 30 40 50 60 70 80 90 100 Forward Voltage (V) Relative Luminous Intensity vs. Forward Current (Ta=25℃) Forward Current (mA) Max. Permissible Forward Current vs. Ambient Temperature 100.0 1.5 90.0 80.0 70.0 Forward Current (mA) Relative Luminous Intensity 1.2 0.9 0.6 0.3 10 20 30 40 50 60 70 80 90 100 Forward Current (mA) Revision 50.0 40.0 30.0 20.0 10.0 0.0 0.0 0 10 60.0 0.0 20.0 40.0 LifecyclePhase: 80.0 100.0 Ambient Temperature (℃) Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 60.0 www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM Package Dimension Note: 1.Tolerances unless mentioned ±0.25mm. Unit = mm 2.An epoxy meniscus may extend about 1.5mm(0.059") down the leads 11 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM Antistic Packing Materials Tube PART NO: CAT: LOT NO: QTY: Tube Label Explanation ‧ QTY: Packing Quantity ‧ LOT No: Lot Number ‧ CAT: Rank of (VF)(Note*)(ΦV) Note: λd/CIE/Color temperature Note: Tolerances unless mentioned ±2.0mm. Unit = mm Standard Box Tube Label Explanation ‧ CPN: Customer’s Product Number ‧ P/N: Product Number ‧ QTY: Packing Quantity ‧ CAT: Rank of (VF)(Note*)(ΦV) ‧ Note: λd/CIE/Color temperature ‧ HUE/REF: Reference ‧ LOT No: Lot Number Note: Tolerances unless mentioned ±3.0mm. Unit = mm 12 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM Packing Quantity Packing material Length × Width × height (mm) Tube Quantity (Pcs) LED Quantity (Pcs) Tube 640 x 9.5 x12 1 80 Standard box 682 x 128 x 45 36 2880 Large box 702 x 420 x 164 324 25920 Note: 1. Normal packing specification is use standard box, unless already defined initially. 2. Vacuum packing with anti-static bag after packing in standard box. 3. Specifications are subject to change without prior notice. Notes 1. Lead Forming During lead formation, the leads should be bent at a point at least 3mm from the base of the epoxy bulb. Lead forming should be done before soldering. Avoid stressing the LED package during leads forming. The stress to the base may damage the LED’s characteristics or it may break the LEDs. Cut the LED leadframes at room temperature. Cutting the leadframes at high temperatures may cause failure of the LEDs. When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the lead position of the LED. If the LEDs are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the LEDs. 2. Storage The LEDs should be stored at 30°C or less and 60%RH or less after being shipped from Everlight and the storage life limits are 3 months. If the LEDs are stored for 3 months or more, they can be stored for a year in a sealed container with a nitrogen atmosphere and moisture absorbent material. Please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can occur. 13 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM 3. Soldering Careful attention should be paid during soldering. Solder the LED no lower than 1.6mm from the base of stopper is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering DIP Soldering Temp. at tip of iron 300℃ Max. (30W Max.) Preheat temp. 100℃ Max. (60 sec Max.) Soldering time 3 sec Max. Bath temp. 260 Max. Distance No lower than 1.6mm from Bath time. 5 sec Max. Distance No lower than 1.6mm from the base of stopper the base of stopper Dip and hand soldering should not be done more than one time. After soldering the LEDs, the epoxy bulb should be protected from mechanical shock or vibration until the LEDs return to room temperature. A rapid-rate process is not recommended for cooling the LEDs down from the peak temperature. Although the recommended soldering conditions are specified in the above table, dip or handsoldering at the lowest possible temperature is desirable for the LEDs. Wave soldering parameter must be set and maintain according to recommended temperature and dwell time in the solder wave. 4. Cleaning When necessary, cleaning should occur only with isopropyl alcohol at room temperature for a duration of no more than one minute. Dry at room temperature before use. Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence of ultrasonic cleaning on the LEDs depends on factors such as ultrasonic power and the assembled condition. Ultrasonic cleaning shall be pre-qualified to ensure this will not cause damage to the LED 5. Heat Management Heat management of LEDs must be taken into consideration during the design stage of LED application. The current should be de-rated appropriately by referring to the de-rating curve found in each product specification. The temperature surrounding the LED in the application should be controlled. Please refer to the data sheet de-rating curve. 14 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM 6. ESD (Electrostatic Discharge) Electrostatic discharge (ESD) or surge current (EOS) can damage LEDs. An ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling LEDs. All devices, equipment and machinery must be properly grounded. Use ion blower to neutralize the static charge which might have built up on surface of the LEDs plastic lens as a result of friction between LEDs during storage and handing. 7. Other Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 15 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever DATASHEET P-LED 38-01-A84-RAC-D4T1U1DH-AM Revision History Rev. Modified date File modified contents 2 2013/5/24 Change the form of datasheet 3 2014/7/18 Change the packing specification 16 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.18, 2014. IssueNo:DPE-0000135 .Rev.3 :3 LifecyclePhase: www.everlight.com Release Date:2014-07-28 18:48:25.0 Expired Period: Forever