SMD Fast Recovery Rectifiers CFRA101-G Thru. CFRA107-G Reverse Voltage: 50 to 1000 Volts Forward Current: 1.0 Amp RoHS Device Features - Glass passivated chip. SMA/DO-214AC - Low forward voltage 0.179(4.55) 0.161(4.10) - High current capability - High reliability 0.064(1.63) 0.048(1.23) - High surge current capability. 0.109(2.76) 0.099(2.51) Mechanical data 0.206(5.22) 0.192(4.87) - Epoxy: UL 94V-0 rate flame retardant. - Case: SMA/DO-214AC, molded plastic. 0.012(0.30) 0.006(0.15) 0.089(2.26) 0.077(1.96) - Terminals: Solderable per MIL-STD-750, method 2026. 0.008(0.20) 0.000(0.00) 0.059(1.51) 0.030(0.75) - Polarity: Color band denotes cathode end. - Weight: 0.069 grams(approx.) Dimensions in inches and (millimeter) Circuit diagram Maximum Rating And Electrical Characteristics (at T =25°C unless otherwise noted) A Symbol CFRA 101-G CFRA 102-G CFRA 103-G CFRA 104-G CFRA 105-G CFRA 106-G CFRA 107-G Unit Max. repetitive peak reverse voltage @ IT=5µA VRRM 50 100 200 400 600 800 1000 V Max. DC blocking voltage VDC 50 100 200 400 600 800 1000 V Max. RMS voltage VRMS 35 70 140 280 420 560 700 V Parameter Max. average forward rectified current IO 1.0 A Max. Instantaneous forward voltage at specified current VF 1.3 V Max. Reverse recovery time (Note 1) Trr Max. DC reverse current at IR 5.0 μA TJ -55 to +150 °C TSTG -55 to +150 °C Operating temperature range Storage temperature range TA=25°C 150 250 500 nS Notes: 1. Reverse recovery test conditions: IF=0.5A, IR=1.0A, IRR=0.25A(RGI circuit) Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 1 QW-BF001 Comchip Technology CO., LTD. SMD Fast Recovery Rectifiers RATING AND CHARACTERISTIC CURVES (CFRA101-G thru CFRA107-G) Fig. 2 - Maximum Non-Repetitive Forward Surge Current Fig.1 - Typical Forward Current Derating Curve 30 single half sine wave resistive or inductive load Forward Current, IF (A) 1.0 0.8 0.6 0.4 0.2 Peak Forward Surge Current, (A) 1.2 20 10 0 0 20 40 60 80 100 120 140 160 10 1 100 Ambient Temperature, (°C) Number of Cycles at 60Hz Fig.3 - Typical Forward Characteristics Fig.4 - Typical Junction Capacitance 10 100 Caoacutance, C (pF) Instantaneous Forward Current, IF (A) Pulse width 8.3 ms single half-sine-wave 1 0.1 TJ=25°C f=1MHz 10 TJ=25 OC Pulse width 300μS 1 0.01 0.6 0.8 1.0 1.2 1.4 1.6 1 Instantaneous Forward Voltage, VF (V) 10 100 Reverse Voltage, VR (V) Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 2 QW-BF001 Comchip Technology CO., LTD. SMD Fast Recovery Rectifiers Reel Taping Specification d P0 P1 E Index hole F W B P C A 12 o 0 D2 D1 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 160mm (min) Start 400mm (min) Direction of Feed A B C d D D1 D2 (mm) 2.79 ± 0.10 5.33 ± 0.10 2.36 ± 0.10 1.55 ± 0.05 330.00 ± 1.00 50.00 MIN. 13.00 + 0.50 - 0.20 (inch) 0.110 ± 0.004 0.210 ± 0.004 0.093 ± 0.004 0.061 ± 0.002 12.99 ± 0.039 1.969 MIN. 0.512 + 0.020 - 0.008 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 5.50 ± 0.05 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 12.00 ± 0.10 18.40 MAX. (inch) 0.069 ± 0.004 0.217 ± 0.002 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.472 ± 0.004 0.724 MAX SYMBOL SMA/DO-214AC SMA/DO-214AC Company reserves the right to improve product design , functions and reliability without notice. REV:B QW-BF001 Page 3 Comchip Technology CO., LTD. SMD Fast Recovery Rectifiers Marking Code Part Number Marking Code CFRA101-G 101 CFRA102-G 102 CFRA103-G 103 CFRA104-G 104 CFRA105-G 105 CFRA106-G 106 CFRA107-G 107 C:Comchip Logo A:Package (SMA) C F A XXX XXX : Product Type Marking Code F: Special Code ▌: Cathode Band Suggested PAD Layout A DO-214AC(SMA) SIZE (mm) (inch) A 5.28 0.208 B 1.88 MAX 0.074 MAX C 1.52 MIN 0.060 MIN D 1.68 MIN 0.066 MIN B D C Standard Packaging REEL PACK Case Type SMA/DO-214AC REEL Reel Size ( pcs ) (inch) 5,000 13 Company reserves the right to improve product design , functions and reliability without notice. REV:B QW-BF001 Page 4 Comchip Technology CO., LTD.