64 Datasheet

64
www.vishay.com
Vishay Spectrol
3/8" Square (10 mm) Multi-Turn Cermet Trimmer
FEATURES
• Industrial grade
• 0.5 W at 70 °C
• Tests according to CECC 41000 or IEC 60393-1
• Contact resistance variation < 1 % typical
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
The Model 64 is a small size trimmer - 3/8" x 3/8" x 3/16" answering PC board mounting requirements. Five versions
are available which differ by the position of the control screw
in relation to the PC board plane and by the spacing of the
terminals. Excellent operational stability is provided by the
use of a cermet element.
DIMENSIONS in millimeters (± 0.5 mm)
9.8 max. 5 ± 1
64X
a
b
c
2.54
2.54
Terminal Spacing on
a 2.54 PCB
5 max.
2.3 ± 0.2 (1)
9.7 max.
Ø 0.5
a
b
c
1.3
0.5
Ø 2.2
Slot 0.6 x 0.6
1.2 ± 0.2
7.9 ± 0.2
64Z
9.8 max. 5 ± 1
0.6 ± 0.2 (1)
5 max.
a
b
c
2.54
2.54 (1)
2.54 (1)
a
b
c
9.7 max.
Ø 0.5
1.3
0.5
Ø 2.2
1.2 ± 0.2
Slot 0.6 x 0.6
7.9 ± 0.2
64W
1.3
2.3 ± 0.2 (1)
1.2 ± 0.1
9.8 max. 5 ± 1
1.6 ± 0.1
Ø 2.2
a
b
c
2.54 (1)
2.54 (1)
a
b
c
9.7 max.
Ø 0.5
Slot 0.6 x 0.6
0.5
64Y
0.6 ± 0.2
(1)
1.3
5 max.
1.2 ± 0.1
9.8 max. 5 ± 1
2.54
Ø 2.2
2.54 (1)
2.54 (1)
a
b
c
Slot 0.6 x 0.6
1.6 ± 0.1
Ø 0.5
5 max.
0.5
64P
4.8 ± 0.2
a
b
c
9.7 max.
5.2 max.
(1)
5±1
2.54
(1)
Slot 0.6 x 0.6
c
b
a
9.7 max.
2.54
2.54
(1)
Ø 0.5
(1)
Ø 2.2
c
b
a
Base level
0.5
1.3
9.7 max.
1.3 ± 0.1
1.2 ± 0.1
Note
(1) To be measured at base level
Revision: 23-Sep-15
Document Number: 57028
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
64
www.vishay.com
Vishay Spectrol
ELECTRICAL SPECIFICATIONS
Resistive element
Cermet
Electrical travel
21 turns ± 2
10  to 2.2 M
Resistance range
Standard series E3
Tolerance
1 - 2 - 2.5 - 5
Standard
10 %
On request
5%
linear
0.5 W at +70 °C
Power rating
POWER IN W
0.5
0
0
25
50
70
125
100
155
AMBIENT TEMPERATURE IN °C
c
a
Circuit diagram
(3)
(1)
cw
b
(2)
Temperature coefficient
Limiting element voltage (linear law)
Contact resistance variation
End resistance (typical)
See Standard Resistance Element table
250 V
2 % Rn or 2 
1
Dielectric strength (RMS)
1000 V
Insulation resistance (500 VDC)
106 M
MECHANICAL SPECIFICATIONS
Mechanical travel
Operating torque (max. Ncm)
End stop torque
Net weight
Wiper (actual travel)
Terminals
23 turns ± 5
1.5
Clutch action
Approx. 0.82 g
Positioned at approx. 50 %
Pure Sn (code e3)
ENVIRONMENTAL SPECIFICATIONS
Temperature range
Climatic category
Sealing
Revision: 23-Sep-15
-55 °C to +155 °C
55/125/56
Fully sealed - IP67
Document Number: 57028
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
64
www.vishay.com
Vishay Spectrol
STANDARD RESISTANCE ELEMENT DATA
STANDARD
RESISTANCE
VALUES
LINEAR LAW
MAX. POWER
AT 70 °C
MAX. WORKING
VOLTAGE
MAX. CURRENT
THROUGH WIPER
TYPICAL
TCR
-55 °C
+125 °C

W
V
mA
ppm/°C
10
20
50
100
200
250
500
1K
2K
2.5K
5K
10K
20K
25K
50K
100K
200K
250K
500K
1M
2M
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.31
0.25
0.125
0.063
0.031
2.2
3.2
5
7.1
10
11.2
15.8
22.4
31.6
35.4
50
70.7
100
112
158
224
250
250
250
250
250
224
158
100
71
50
45
32
22
16
14
10
7.1
5
4.5
3.2
2.2
1.3
1
0.5
0.25
0.13
± 100
PERFORMANCES
TESTS
Load life
Climatic sequence
Long term damp heat
Rapid temperature change
Shock
Vibration
Rotational life
TYPICAL VALUES AND DRIFTS
CONDITIONS
RT/RT (%)
R1-2/R1-2 (%)
1000 h at rated power
90'/30' - ambient temp. 70 °C
±1%
Contact res. variation: < 1 % Rn
±2%
Phase A dry heat 125 °C - 30 % Pr
Phase B damp heat
Phase C cold -55 °C
Phase D damp heat 5 cycles
± 0.5 %
±1%
56 days
40 °C, 93 % RH
± 0.5 %
Dielectric strength: 1000 VRMS
Insulation resistance: > 104 M
±1%
5 cycles
-55 °C to +125 °C
± 0.5 %
V1-2/V1-3  ± 1 %
50 g at 11 ms
3 successive shocks
in 3 directions
± 0.1 %
± 0.2 %
10 Hz to 55 Hz
0.75 mm or 10 g
during 6 h
± 0.1 %
V1-2/V1-3  ± 0.2 %
200 cycles
±4%
Contact res. variation: < 1 % Rn
-
Note
• Nothing stated herein shall be construed as a guarantee of quality or durability.
MARKING
•
•
•
•
•
•
•
Vishay trademark
Model
Style
Ohmic value (in , k, M)
Tolerance (in %)
Manufacturing date
Marking of terminal 3
Revision: 23-Sep-15
Document Number: 57028
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
64
www.vishay.com
Vishay Spectrol
PACKAGING
• In box of 200 pieces code B40 (BO200)
On request:
•In box of 100 pieces code B30 (BO100)
•In tube of 50 pieces code T20 (TU50)
ORDERING INFORMATION (part number)
M
6
4
P
2
2
4
K
B
4
0
Model
STYLE
OHMIC VALUE
TOLERANCE
PACKAGING
M64
P
W
X
Y
Z
From
10  to 2.2 M
224 = 220 k
K = 10 %
On request
J=5%
B40 = box
200 pieces
On request:
B30 = box
100 pieces
T20 = tube
50 pieces
SPECIAL
NUMBER
(If applicable)
Given by Vishay
for custom design
DESCRIPTION (for information only)
64
P
220K
10 %
MODEL
STYLE
VALUE
TOLERANCE
SPECIAL
BO200
e3
PACKAGING
LEAD FINISH
RELATED DOCUMENTS
APPLICATION NOTES
Potentiometers and Trimmers
www.vishay.com/doc?51001
Guidelines for Vishay Sfernice Resistive and Inductive Components
www.vishay.com/doc?52029
Revision: 23-Sep-15
Document Number: 57028
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000