1N5822-G

Schottky Barrier Rectifier
1N5820-G Thru. 1N5822-G
Forward Current: 3.0A
Reverse Voltage: 20 to 40V
RoHS Device
Features
DO-27
-Fast switching.
-Low forward voltage, high current capability.
-Low power loss, high efficiency.
-High current surge capability.
0.052(1.3)
0.048(1.2)
1.0(25.4)
MIN.
-High temperature soldering guaranteed: 250°C/10
seconds, 0.375”(9.5mm) lead length at 5lbs.
(2.3kg) tension.
0.375(9.5)
0.335(8.5)
Mechanical data
0.220(5.6)
0.197(5.0)
-Case: Transfer molded plastic
-Epoxy: UL94V-0 rate flame retardant
-Polarity: Color band denotes cathode end
-Lead: Plated axial lead, solderable per MIL-STD202E method 208C
Mounting position: Any
-Weight: 0.042 ounces, 1.19gram
1.0(25.4)
MIN.
Dimensions in inches and (millimeter)
Maximum
Ratings and Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
Symbol
1N5820-G
1N5821-G
1N5822-G
Unit
Maximum repetitive peak reverse voltage
VRRM
20
30
40
V
Parameter
Maximum RMS voltage
VRMS
14
21
28
V
Maximum DC blocking voltage
VDC
20
30
40
V
Maximum average forward rectified current
0.375"(9.5mm) lead length @TL=95°C
I(AV)
3.0
A
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC method)
IFSM
80
A
Maximum forward voltage at
3.0A
9.4A
Maximum reverse current
at rated DC blocking voltage
*1
*2
Typical junction capacitance
Typical thermal resistance
Operating temperature range
Storage temperature range
*3
TA=25 OC
O
TA=100 C
VF
0.475
0.850
0.500
0.900
0.525
0.950
V
IR
2.0
20
mA
CJ
250
pF
RθJA
40
TJ
-55 to +125
O
C
TSTG
-55 to +125
O
C
O
C/W
NOTES:
1. Pulse test: 300μs pulse width, 1% duty cycle.
2. Measured at 1.0MHz and applied reverse voltage of 4.0Volts.
2. Thermal resistance from junction to ambient, P.C.B. Mounted with 0.375"(9.5mm) lead length
with 2.5”×2.5”(63.5×63.5mm) copper pads.
REV:A
QW-BB016
Page 1
Schottky Barrier Rectifier
RATING AND CHARACTERISTIC CURVES (1N5820-G Thru. 1N5822-G)
Fig.2 Maximum Non-repetitive Peak
Forward Surge Current
Fig.1 Typical Forward Current Derating Curve
100
Peak Forward Surge Current (A)
Average Forward Current (A)
3.0
2.0
1.0
Single phase
Half wave, 60Hz
Resistive or
inductive load
0.375"(9.5mm)
lead length
0
0
40
20
60
80
100
Lead Temperature (
O
120
8.3mS single half sinewave (JEDEC Method)
50
1 Cycle
10
0.1
140
100
Number of Cycles at 60Hz
Fig.3 Typical Instantaneous Forward Characteristics
Fig.4 Typical Reverse Characteristics
100
10
Instantaneous Reverse Current (mA)
Instantaneous Forward Current (A)
10
C)
10
TJ=125 OC
1.0
O
TJ=25 C
0.1
Pulse width=300μs
1% duty cycle
0.01
TJ=125 OC
1
TJ=75 OC
0.1
O
TJ=25 C
0.01
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
Instantaneous Forward Voltage (V)
0
20
40
60
80
100
120
140
Percent of Rated Peak Reverse Voltage (%)
Fig.5 Typical Junction Capacitance
Junction Capacitacne (pF)
100
10
O
TJ=25 C
f=1MHz
Vsig=50mV
1
0.1
1
10
100
Reverse Voltage (V)
REV:A
QW-BB016
Page 2
Similar pages