Low VF SMD Schottky Bridge Rectifiers CDBHM120L-HF Thru. CDBHM1100L-HF Reverse Voltage: 20 to 100 Volts Forward Current: 1.0 Amp RoHS Device Halogen Free MBS Features -High surge forward current capability. 0.140(0.35) 0.006(0.15) - + -Low Forward voltage drop. -General purpose 1 phase Bridge -rectifier applications -UL recognized file # E230084 0.157(4.00) 0.276(7.00) MAX 0.142(3.60) 0.043(1.10) 0.028(0.70) 0.008(0.20) MAX 0.083(2.12) 0.043(1.10) 0.102(2.60) 0.087(2.20) R 0.053(1.53) 0.037(0.95) 0.193(4.90) 0.177(4.50) Mechanical data 0.053(1.53) 0.037(0.95) -Case: molded plastic 0.106(2.70) 0.090(2.30) -Epoxy: UL 94V-0 rate flame retardant. 0.118(3.0) MAX 0.033(0.84) 0.022(0.56) -Lead: solder plated -Polarity: As marked Dimensions in inches and (millimeters) -Weight: 0.125 gram(approx) Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbol CDBHM-HF Units Conditions 120L 140L 160L 180L 1100L Max. Repetitive peak reverse voltage VRRM 20 40 60 80 100 V Max. DC blocking voltage VDC 20 40 60 80 100 V Max. RMS voltage VRMS 14 28 42 56 70 V Average rectified output current @60Hz sine wave, R-load, TA=25°C IO On alumina substrate 1.0 On glass-epoxi substrate 0.8 A Peak forward surge current,8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM Max. Peak forward voltage VFM IFM=0.5A Max. Peak reverse current IRRM VRM=VRRM 0.5 mA 1ms≤t<8.3ms TA=25°C 6.6 AS On alumina substrate 76 Max. Current Squared Time 40 2 It (1) Max. Thermal resistance RθJA RθJL Operating temperature range Sorage temperature range 0.55 On glass-epoxi substrate Between junction and lead 0.65 A 0.85 134 V 2 °C/W 20 TJ -55 to +150 °C TSTG -55 to +150 °C Notes: 1. Between junction and ambient Company reserves the right to improve product design , functions and reliability without notice. REV: D Page 1 QW-JL005 Comchip Technology CO., LTD. Low VF SMD Schottky Bridge Rectifiers Rating and Characteristics Curves (CDBHM120L-HF Thru. CDBHM1100L-HF) Fig.1 - Forward Current Derating Curve Fig.2 - Typical Forward Characteristics 6 1.0 Instantaneous Forward Current, (A) Average Forward Output Current, (A) 1.2 On alumina substrate Sine wave R-load With Heatsink 0.8 0.6 0.4 On glass-epoxi substrate 0.2 CDBHM120L-HF ~ CDBHM140L-HF 1 CDBHM180L-HF ~ CDBHM1100L-HF 0.1 CDBHM160L-HF TA=25°C 0 0 25 50 75 100 125 150 0.01 0.4 175 0.6 0.7 0.8 0.9 Instantaneous Forward Voltage, (V) Fig.3 - Maximum Non-Repetitive Surge Current Fig.4 - Typical Reverse Characteristics 60 100 Instantaneous Reverse Current, (mA) Peak Forward Surge Current, (A) 0.5 Case Temperature, (°C) TJ=25°C SINGLE-SINE-WAVE 50 40 30 20 10 TJ=150°C 10 1 TJ=25°C 0.1 0.01 CDBHM120L-HF ~ CDBHM140L-HF CDBHM160L-HF CDBHM180L-HF ~ CDBHM1100L-HF 0.001 0 1 10 100 Number of cycles at 60Hz 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage, (%) Company reserves the right to improve product design , functions and reliability without notice. REV: D Page 2 QW-JL005 Comchip Technology CO., LTD. Low VF SMD Schottky Bridge Rectifiers Reel Taping Specification d P0 P1 E Index hole - + F W B C P A 12 o 0 D2 D1 D W1 Trailer ....... ....... End Device ....... ....... Leader ....... ....... ....... ....... 160mm (min) Start 400mm (min) Direction of Feed MBS MBS SYMBOL A B C d D D1 D2 (mm) 5.00 ± 0.10 7.24 ± 0.10 2.95 ± 0.10 1.55 ± 0.05 330.0 ± 2.00 50.0 Min. 13.0 ± 0.50 (inch) 0.197 ± 0.004 0.285 ± 0.004 0.116 ± 0.004 0.061 ± 0.002 13.00 ± 0.079 1.969 Min. 0.512 ± 0.020 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 5.50 ± 0.05 8.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 12.00 ± 0.30 18.70 Max. (inch) 0.069 ± 0.004 0.217 ± 0.002 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.004 0.472 ± 0.012 0.736 Max. Company reserves the right to improve product design , functions and reliability without notice. REV: D Page 3 QW-JL005 Comchip Technology CO., LTD. Low VF SMD Schottky Bridge Rectifiers Marking Code Part Number Marking Code CDBHM120L-HF MBSK12SE - + MBSKxxSE CDBHM140L-HF MBSK14SE CDBHM160L-HF MBSK16SE CDBHM180L-HF MBSK18SE CDBHM1100L-HF MBSK110SE xx/xxx = Product type marking code Suggested PAD Layout A MBS SIZE (mm) (inch) A 1.20 0.047 B 1.84 0.072 C 2.40 0.094 D 6.00 0.236 D B C Standard Packaging REEL PACK Case Type MBS REEL Reel Size ( pcs ) (inch) 2,500 13 Company reserves the right to improve product design , functions and reliability without notice. REV: D Page 4 QW-JL005 Comchip Technology CO., LTD.