Float Controls sealed mechanical switch - wide angle Custom designed float switch for liquid level control. Designed for use with liquid level warning alarms, pilot duty control of simplex or duplex systems, sump pumps or any type of high/low operation. Available with standard power cords or custom cords with quick-connect plugs, these floats can serve as original equipment components, retrofit, or as replacement parts. Tested to a water depth of 60 feet. UL and CSA Recognized U.L. # E87187 C.S.A. # LR64966 Ordering Codes F 1 2 3 Float Color 4 5 6 7 8 Cord Termination Code 1 9 Cord Length Code 4 Code 6 Code 7 C Gray 1 120VAC Series Tap Plug* 1 0 10 feet F Yellow 3 Plain Cut 2 0 20 feet A Custom 3 0 30 feet A A Custom length G Black M Blue D Red H Green Cord Type Code 5 7 SJTO 16/2 8 SJTO 16/3 Mechanical Switch Code 2 Code 3 Special Options Operating (Included) Angle & Switch Description S A 79.5° 13A, 1/2 HP, SPST-NO (Normally Open) S B 79.5° 13A, 1/2 HP, SPST-NC (Normally Closed) S C 79.5° 13A, 1/2HP, SPDT (Changeover) Code 8 Code 9 A W includes Weight Kit 4438 Note: * = UL Listed. Only available with 10ft cable (Cord length Code 10) Example: FCSA3710AW Gray Float, SPST-NO mechanical switch, plain cut cord termination, SJTO 16/2 cord type, cord length 10 feet with weight kit. Not all part number combinations are active. Set up charges may apply. Please contact factory for availability. Contact factory for custom requirements or specific application information American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana IN46516 Page 1 of 2 www.aecsensors.com Ref: FSME-WIDE 111513JHM Sales Department Tel: (888) 847-6552 Float Controls sealed mechanical switch - wide angle Typical Application The inches of water pumped is determined by float tether length and location. Wide Angle 79.5° approximate operating angle Tether length, inches (x) 3 4 6 8 10 12 Water pumped, inches (y) 7 8 11 14 17 21 Make Angle (approximate) 40.5° Break Angle (approximate) 39.5° Float switches are for use with motor-operated water pumps only, not for swimming pool use. Recommended operating temperature range is 32°F to 160°F (0°C to 71°C) Specifications are subject to change without notice. E&OE. American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana IN46516 Page 2 of 2 www.aecsensors.com Ref: FSME-WIDE 111513JHM Sales Department Tel: (888) 847-6552