Datasheet

XFGM Data sheet
Pre-amplified/5V Excitation/Gauge
■Features
On-chip amplification and temperature compensations
Pre-calibration of offset voltage and span
Surface mount package
■Ordering Information
XFGM-6 025KP G SR
Terminal leads configuration
Model
Surface mount package
Length of the pressure port
3:3mm
6:6mm
Measurable pressure
range(kPa)
-100 to 100
0 to -100
0 to 25
0 to 50
0 to 100
0 to 200
0 to 1000
Pressure type
G:Gauge(Positive pressure)
GV:Gauge Pressure(Negative pressure)
GW:Gauge Pressure(Positive/Negative pressure)
Rated Pressure
KP:kPa
MP:MPa
Weight
(grams)
Weight
(grams)
0.3
0.35
Part number
3mm pressure port
6mm pressure port
XFGM-3100KPGWSR
XFGM-6100KPGWSR
XFGM-3100KPGVSR
XFGM-6100KPGVSR
XFGM-3025KPGSR
XFGM-6025KPGSR
XFGM-3050KPGSR
XFGM-6050KPGSR
XFGM-3100KPGSR
XFGM-6100KPGSR
XFGM-3200KPGSR
XFGM-6200KPGSR
XFGM-3001MPGSR
XFGM-6001MPGSR
RoHS compliance
■Specifications
100KPGW
Model
Recommended operating conditions
Pressure type
Rated pressure
Measurable pressure range
Temperature range
Pressure media
Supply voltage(constant)
+/-100
-100 to100
100KPGV
-100
0 to -100
025KPG
050KPG
100KPG
200KPG
Gauge pressure
50
100
200
0 to 50
0 to 100
0 to 200
0 to 85
Non-corrosive gases only (No liquid)
5+/-0.25
25
0 to 25
Absolute maximum rating
Maximum load pressure
Twice of rated pressure
8
-40 to 125
-40 to 125
30 to 80 (Non dew condition)
Electrical characteristics (Excitation voltage Vcc=5.0V constant ,ambient temperature Ta=25deg.C)
Power consumption
10mA max.
Output impedance
10Ω max.
Source current
0.2mA max.
Sink current
2mA max.
Response time
2 (for the reference)
Output span voltage
4.5
Offset voltage *1
*2
*3
0.2+/-0.1125 (at 0 kPa )
Output voltage at full scale *1
*4
*5
4.7+/-0.1125 (at rated pressure)
Accuracy *1
+/-2.5
Maximum excitation voltage
Operating temperature
Storage temperature
Operating humidity
*1 Excluding input voltage error.
*2 0.2+/-0.1125V(at -100kPa )
*4 4.7+/-0.1125V(at +100kPa)
0-85deg.C
*3 0.2+/-0.1125V(at 0kPa)
*5 4.7+/-0.1125V(at -100kPa)
1
001MPG
1000
0 to 1000
1.5 times
of rating
pressure
Unit
kPa
kPa
deg.C
VDC
VDC
deg.C
deg.C
%RH
mA
Ω
mA
mA
msec.
V
V
V
%FS/0-85deg.C
XFGM Data sheet
Pre-amplified/5V Excitation/Gauge
■Outline dimensions■
2-φ1.1
2
XFGM Data sheet
Pre-amplified/5V Excitation/Gauge
■Connection diagram■
View from Lavel
Marking
■Transfer Function■
Vout = Vs×( P×α+β) ± (Pressure Error×Temperature Error Multiplier×α×Vs)
Vs=Vcc=5.0V
P=Input pressure(kPa)
Model
XFGM-3100KPGWSR
XFGM-3100KPGVSR
XFGM-3025KPGSR
XFGM-3050KPGSR
XFGM-3100KPGSR
XFGM-3200KPGSR
XFGM-3001MPGSR
XFGM-6100KPGWSR
XFGM-6100KPGVSR
XFGM-6025KPGSR
XFGM-6050KPGSR
XFGM-6100KPGSR
XFGM-6200KPGSR
XFGM-6001MPGSR
Measurable
pressure
range(kPa)
-100 to 100
0 to -100
0 to 25
0 to 50
0 to 100
0 to 200
0 to 1000
Temperature Error Multiplier
3
α
β
Pressure Error
(kPa)
0.0045
-0.009
0.036
0.018
0.009
0.0045
0.0009
0.49
0.04
0.04
0.04
0.04
0.04
0.04
5
2.5
0.625
1.25
2.5
5
25
XFGM Data sheet
Pre-amplified/5V Excitation/Gauge
■Output characteristics■
XFGM-3100KPGVSR
XFGM-3025KPGSR
XFGM-3050KPGSR
XFGM-3100KPGSR
XFGM-3200KPGSR
XFGM-3001MPGSR
XFGM-6100KPGVSR
XFGM-6025KPGSR
XFGM-6050KPGSR
XFGM-6100KPGSR
XFGM-6200KPGSR
XFGM-6001MPGSR
↑Output voltage(mV)
Output voltage
at full scale
4.7V
Output span
voltage
Offset voltage
0.2V
Rated pressure
0kPa
Atomospheric
pressure
XFGM-3100KPGWSR
→Pressure(kPa)
↑Output voltage(mV)
XFGM-6100KPGWSR
Output voltage
at full scale
4.7V
Output span
voltage
Offset voltage
0.2V
-100kPa
0kPa
Atomospheric
pressure
Note ;
+100kPa
→Pressure(kPa)
Please read instruction “Notes” before using the sensor.
Fujikura reserves the right to change specifications without notice.
Please keep the sensors sealed using static shielding bags on storage.The pins of the sensor are plated by Ag.
If the sensors expose to an atmosphere, the pins will be black by sulfuration.
Please set Zero-calibration function up your products. The offset voltage may be shifted some mechanical stress
such as mounting, installation and etc. over longtime using.
4
XFGM Data sheet
Pre-amplified/5V Excitation/Gauge
Reflow Soldering process recommendation profile
Package
Surface
Temperature
(Degree C)
230
210
150
Room
Temp.
Time
a
a: Rump up rate
b: Pre-heating
c: Rump up rate
d: Heating
e: Rump down rate
Note ;
b
c
d
e
1 or 2 deg.C/sec.
150 to 180 deg.C,within 60 to120sec.
1 to 2 deg.C/sec.
max.230 deg.C,max.10sec. 210 deg.C,within 30sec.
1 or 2 deg.C/sec.
1 ) Temperature means Surface temperature of the sensor package.
2 ) Reflow process max. 2 times.
3 ) Do not wash the sensor.
4 ) Do not put the solder and flux on the sensor package.
If you have any questions regarding technical issues or specifications, please contact us.
Fujikura Ltd. Sensor Department
5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan
Phone +81-(0)3-5606-1072
E-mail : [email protected]
5
Similar pages