PDR5K Green 5A GLASS PASSIVATED RECTIFIER PowerDI®5 Product Summary @TA = +25°C Features and Benefits VRRM (V) IO (A) VFmax (V) IRmax (μA) 800 5 0.99 10 Low Leakage Current Lead Free Finish/RoHS Compliant (Note 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) NEW PRODUCT Description Glass Passivated Die Construction Mechanical Data ® 5.0 A Glass Passivated Rectifier in PowerDI 5 package, offers high surge current capability and low leakage current, lead free finish and RoHS compliant, ”Green” device. ® Case: PowerDI 5 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 0.096 grams (approximate) LEFT PIN RIGHT PIN Top View Ordering Information Bottom View Note: Pins Left & Right must be electrically connected at the printed circuit board. (Note 4) Part Number PDR5K-13 Notes: BOTTOMSIDE HEAT SINK Case ® PowerDI 5 Packaging 5000/Tape & Reel 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html Marking Information R5K = Product Type Marking Code = Manufacturers’ code marking YYWW = Date code marking YY = Last two digits of year (ex: 13 for 2013) WW = Week code 01 to 52 K = Factory Designator PowerDI is a registered trademark of Diodes Incorporated. PDR5K Document number: DS31979 Rev. 2 - 2 1 of 4 www.diodes.com September 2013 © Diodes Incorporated PDR5K Maximum Ratings (@TA = +25°C, unless otherwise specified.) Symbol PDR5K Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 800 V Average Rectified Output Current IO 5 A IFSM 200 A Value Unit Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Thermal Characteristics Characteristic Symbol Typical Thermal Resistance Junction to Lead RJL 3 °C/W Typical Thermal Resistance Junction to Ambient (Note 5) RJA 28 °C/W TJ, TSTG -65 to +155 °C Operating and Storage Temperature Range Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Symbol Min Typ Max Forward Voltage VF 0.91 0.99 0.87 V Reverse Leakage Current (Note 6) IR 10 0.3 µA mA VR = 800V, TJ = +25°C VR = 800V, TJ = +125°C Typical Reverse Recovery Time trr 3 µs IF = 0.5A, IR = 1.0A, Irr = 0.25A Notes: Unit Test Condition IF = 5A, TS = +25°C IF = 5A, TS = +125°C 5. Device mounted on Polymide PCB, with 16X recommended pad layout. 6. Short duration pulse test used to minimize self-heating effect. 4.5 IF, INSTANTANEOUS FORWARD CURRENT (A) 5.0 PD, POWER DISSIPATION (W) NEW PRODUCT Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Note 5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 1 2 3 4 5 6 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation 100 10 1 0.1 0.01 0.001 TA = 150°C TA = 125°C TA = 85°C T A = 25°C 0.0001 0.00001 0 0.2 0.4 0.6 0.8 1.0 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics PowerDI is a registered trademark of Diodes Incorporated. PDR5K Document number: DS31979 Rev. 2 - 2 2 of 4 www.diodes.com September 2013 © Diodes Incorporated 1,000 10 CT, TOTAL CAPACITANCE (pF) TA = 150°C TA = 125°C 1 TA = 85°C 0.1 TA = 25°C 0.01 0.001 0 f = 1MHz 100 10 1 0.1 0.1 200 400 600 800 1,000 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics 1 10 VR, DC REVERSE VOLTAGE (V) 100 Fig. 4 Total Capacitance vs. Reverse Voltage 150 6 Based on Lead Temperature (TL) TA, DERATED AMBIENT TEMPERATURE (°C) IR, INSTANTANEOUS REVERSE CURRENT (µA) 100 IF(AV), AVERAGE FORWARD CURRENT (A) NEW PRODUCT PDR5K RJA = RJC 5 Note 3 Note 6 4 3 2 1 0 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (° C) Fig. 5 Forward Current Derating Curve 125 100 75 50 25 0 175 0 200 400 600 800 VR, DC REVERSE VOLTAGE (V) 1,000 Fig. 6 Operating Temperature Derating Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A D ® D2 A2 b2 L E E2 E1 W L1 e b1 b1 A2 PowerDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm PowerDI is a registered trademark of Diodes Incorporated. PDR5K Document number: DS31979 Rev. 2 - 2 3 of 4 www.diodes.com September 2013 © Diodes Incorporated PDR5K Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X NEW PRODUCT Y X1 (2x) Dimensions C Value (in mm) G X X1 Y Y1 0.852 3.360 1.390 4.860 1.840 1.400 G Y1 (2x) C IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2013, Diodes Incorporated www.diodes.com PowerDI is a registered trademark of Diodes Incorporated. PDR5K Document number: DS31979 Rev. 2 - 2 4 of 4 www.diodes.com September 2013 © Diodes Incorporated