Download

E3FA PHOTOELECTRIC SENSORS
A new generation in sensing performance
»» Simplicity
» »O n e fa m i l y fo r a l l
» »N o n - s t o p d e t e c t i o n
2
A new generation in sensing
performance!
Producing more than a million per year, Omron is
a world leader in photoelectric sensors. Backed
by more than 40 years of experience, Omron is
constantly enhancing its portfolio and has now
completely redesigned and expanded its popular
M18 cylindrical range. Renowned for its high
quality and product reliability, Omron’s new
generation of photoelectric sensors represents one
of the largest varieties of dependable and easy-touse photoelectric sensors on the market. Regardless
of your industry or application, the E3FA series has
the right sensor for the job at the best price versus
performance.
Simplicity
•Simple selection
•Simple installation
One family for all
•All standard applications covered
•A wide variety of models
•Models designed for special applications
Non-stop detection
•High quality and reliability
•High EMC protection
•High light immunity
•Robust and waterproof housing
3
Simplicity
Omron’s compact E3FA series of photoelectric sensors is simple and quick to mount, as well as easy and intuitive to set-up. The large
and robust adjuster makes life much easier for installers to adjust the sensor, as does the bright, high-power red LED, which is clearly
visible for easy alignment, even over longer distances. Similarly, the sensor’s LED status indicator can be viewed from long distances
and wide angles.
Compact size and shape. Can be installed almost anywhere.
Visible LED light for easy alignment.
Bright LED indicators for the easy operational status checking.
Flush mounting option for smooth installation.
4
One family for all
Typically installed in industrial plants ranging from food and
beverage, textiles, ceramics and brick production, through to
logistics, there’s always an E3FA model to fit your application.
This extensive photoelectric sensor series with high reliability
and enhanced performance includes through-beam, retroreflective and diffuse reflective types in straight and radial
versions. Straight versions are also available with backgroundsuppression, limited-reflective detection, and transparent object
detection types for special applications.
All models are available in plastic and metal housing.
E3FA Standard Series
E3RA Standard Series
Omron’s well-known quality is built into this
series, which exceeds market standards in
terms of reliability and solves a wide range of
applications in various industries.
E3RA provides a full line-up
of radial types that increases
mounting flexibility to match
specific requirements.
Through-beam
20 m
Through-beam 15 m
Retro-reflective with MSR
function
0.1 to 4 m with E39-R1S
Retro-reflective with MSR
function 0.1 to 3 m with E39-R1S
Coaxial Retro-reflective
with MSR function
0 to 500 mm
with E39-R1S
Diffuse-reflective
100 mm
300 mm
Diffuse-reflective
100 mm
300 mm
1m
700 mm
5
Application specific models
Limited-reflective types suitable for
Transparent object detection types
Background suppression types for the
detecting transparant film to shiny, mirror
utilising Omron’s unique technology
stable detection of different objects with
film.
for detecting objects with birefringent
various colours.
(double refraction) properties.
E3FA Special Models
The E3FA series includes special models to
solve demanding applications, for example, in
the food and packaging industry.
This includes the detection of
transparent or structured objects.
BGS (background suppression) 100 mm
200 mm
Limited distance reflective
10 to 50 mm
Transparent detection with
P-opaquing function
Transparent detection with
P-opaquing function
100 to 500 mm with E39-RP1
0.1 to 2 m with E39-RP1
6
Non-stop detection
Especially designed for machines that never stop, the rugged E3FA series offers completely reliable sensing in a robust and
waterproof housing that can withstand even high-pressure cleaning. Exceeding market standards, this series also has high EMC
protection and light immunity. In addition, there is the added benefit of the high-power LED, which contributes to high sensing
stability even in environments with dust or vibrations.
High power LED to compensate for dirt and misalignment.
Pulse synchronisation for high ambient light immunity.
Intensive shielding for high electromagnetic noise immunity.
Tight housing construction for high-level water protection.
E3FA/E3RA/E3FB/E3RB
Ordering Information
Sensors (E3FA Plastic housing) [Refer to Dimensions on page 21.]
Sensor type
Sensing distance
Connection method
Through-beam *1.
Coaxial Retro-reflective with
MSR function *2.
0 to 500 mm
with E39-R1S
Diffuse-reflective
100 mm
300 mm
1m
100 mm
300 mm
1m
BGS
(background suppression)
100 mm
200 mm
Limited distance reflective
NPN output
PNP output
pre-wired
M12 connector
set E3FA-TN21
Emitter E3FA-TN21-L
Receiver E3FA-TN21-D
pre-wired
set E3FA-TN12 2M
set E3FA-TP12 2M
Emitter E3FA-TN12-L 2M Emitter E3FA-TP12-L 2M
Receiver E3FA-TN12-D 2M Receiver E3FA-TP12-D 2M
M12 connector
set E3FA-TN22
Emitter E3FA-TN22-L
Receiver E3FA-TN22-D
set E3FA-TP22
Emitter E3FA-TP22-L
Receiver E3FA-TP22-D
pre-wired
E3FA-RN11 2M
E3FA-RP11 2M
M12 connector
E3FA-RN21
E3FA-RP21
pre-wired
E3FA-RN12 2M
E3FA-RP12 2M
M12 connector
E3FA-RN22
E3FA-RP22
pre-wired
E3FA-DN11 2M
E3FA-DP11 2M
M12 connector
E3FA-DN21
E3FA-DP21
pre-wired
E3FA-DN12 2M
E3FA-DP12 2M
M12 connector
E3FA-DN22
E3FA-DP22
pre-wired
E3FA-DN13 2M
E3FA-DP13 2M
M12 connector
E3FA-DN23
E3FA-DP23
pre-wired
E3FA-DN14 2M
E3FA-DP14 2M
M12 connector
E3FA-DN24
E3FA-DP24
pre-wired
E3FA-DN15 2M
E3FA-DP15 2M
M12 connector
E3FA-DN25
E3FA-DP25
pre-wired
E3FA-DN16 2M
E3FA-DP16 2M
M12 connector
E3FA-DN26
E3FA-DP26
pre-wired
E3FA-LN11 2M
E3FA-LP11 2M
M12 connector
E3FA-LN21
E3FA-LP21
pre-wired
E3FA-LN12 2M
E3FA-LP12 2M
M12 connector
E3FA-LN22
E3FA-LP22
pre-wired
E3FA-VN11 2M
E3FA-VP11 2M
M12 connector
E3FA-VN21
E3FA-VP21
pre-wired
E3FA-BN11 2M
E3FA-BP11 2M
M12 connector
E3FA-BN21
E3FA-BP21
pre-wired
E3FA-BN12 2M
E3FA-BP12 2M
M12 connector
E3FA-BN22
E3FA-BP22
15 m
0.1 to 4 m
with E39-R1S
Infrared light
set E3FA-TN11 2M
set E3FA-TP11 2M
Emitter E3FA-TN11-L 2M Emitter E3FA-TP11-L 2M
Receiver E3FA-TN11-D 2M Receiver E3FA-TP11-D 2M
20 m
Retro-reflective with MSR
function *2.
Red light
Model
set E3FA-TP21
Emitter E3FA-TP21-L
Receiver E3FA-TP21-D
10 to 50 mm
Transparent detected with
P-opaquing function *2.
100 to 500 mm
with E39-RP1
Transparent detected with
P-opaquing function *2.
0.1 to 2 m
with E39-RP1
*1. The set type includes the emitter and receiver.
*2. The Reflector is sold separately. Select the Reflector model most suited to the application.
7
E3FA/E3RA/E3FB/E3RB
Sensors (E3RA Plastic housing) [Refer to Dimensions on page 21.]
Sensor type
Sensing distance
Connection method
Through-beam *1.
0.1 to 3 m
with E39-R1S
Diffuse-reflective
100 mm
300 mm
700 mm
PNP output
pre-wired
M12 connector
set E3RA-TN21
Emitter E3RA-TN21-L
Receiver E3RA-TN21-D
set E3RA-TP21
Emitter E3RA-TP21-L
Receiver E3RA-TP21-D
pre-wired
E3RA-RN11 2M
E3RA-RP11 2M
M12 connector
E3RA-RN21
E3RA-RP21
pre-wired
E3RA-DN11 2M
E3RA-DP11 2M
M12 connector
E3RA-DN21
E3RA-DP21
pre-wired
E3RA-DN12 2M
E3RA-DP12 2M
M12 connector
E3RA-DN22
E3RA-DP22
pre-wired
E3RA-DN13 2M
E3RA-DP13 2M
M12 connector
E3RA-DN23
E3RA-DP23
*1. The set type includes the emitter and receiver.
*2. The Reflector is sold separately. Select the Reflector model most suited to the application.
8
Model
NPN output
set E3RA-TN11 2M
set E3RA-TP11 2M
Emitter E3RA-TN11-L 2M Emitter E3RA-TP11-L 2M
Receiver E3RA-TN11-D 2M Receiver E3RA-TP11-D 2M
15 m
Retro-reflective with MSR
function *2.
Red light
E3FA/E3RA/E3FB/E3RB
Sensors (E3FB/E3RB Metal housing) [Refer to Dimensions on page 22.]
Sensor type
Sensing distance
Connection method
Through-beam *1.
Coaxial Retro-reflective with
MSR function *2.
0.1 to 4 m
with E39-R1S
0 to 500 mm
with E39-R1S
Diffuse-reflective
100 mm
300 mm
1m
BGS
(background suppression)
100 mm
200 mm
Limited distance reflective
Model
NPN output
PNP output
pre-wired
set E3FB-TN11 2M
set E3FB-TP11 2M
Emitter E3FB-TN11-L 2M Emitter E3FB-TP11-L 2M
Receiver E3FB-TN11-D 2M Receiver E3FB-TP11-D 2M
M12 connector
set E3FB-TN21
Emitter E3FB-TN21-L
Receiver E3FB-TN21-D
set E3FB-TP21
Emitter E3FB-TP21-L
Receiver E3FB-TP21-D
pre-wired
E3FB-RN11 2M
E3FB-RP11 2M
M12 connector
E3FB-RN21
E3FB-RP21
pre-wired
E3FB-RN12 2M
E3FB-RP12 2M
M12 connector
E3FB-RN22
E3FB-RP22
pre-wired
E3FB-DN11 2M
E3FB-DP11 2M
M12 connector
E3FB-DN21
E3FB-DP21
pre-wired
E3FB-DN12 2M
E3FB-DP12 2M
20 m
Retro-reflective with MSR
function *2.
Red light
M12 connector
E3FB-DN22
E3FB-DP22
pre-wired
E3FB-DN13 2M
E3FB-DP13 2M
M12 connector
E3FB-DN23
E3FB-DP23
pre-wired
E3FB-LN11 2M
E3FB-LP11 2M
M12 connector
E3FB-LN21
E3FB-LP21
pre-wired
E3FB-LN12 2M
E3FB-LP12 2M
M12 connector
E3FB-LN22
E3FB-LP22
pre-wired
E3FB-VN11 2M
E3FB-VP11 2M
M12 connector
E3FB-VN21
E3FB-VP21
pre-wired
E3FB-BN11 2M
E3FB-BP11 2M
M12 connector
E3FB-BN21
E3FB-BP21
pre-wired
E3FB-BN12 2M
E3FB-BP12 2M
M12 connector
E3FB-BN22
E3FB-BP22
pre-wired
set E3RB-TN11 2M
set E3RB-TP11 2M
Emitter E3RB-TN11-L 2M Emitter E3RB-TP11-L 2M
Receiver E3RB-TN11-D 2M Receiver E3RB-TP11-D 2M
M12 connector
set E3RB-TN21
Emitter E3RB-TN21-L
Receiver E3RB-TN21-D
set E3RB-TP21
Emitter E3RB-TP21-L
Receiver E3RB-TP21-D
pre-wired
E3RB-RN11 2M
E3RB-RP11 2M
M12 connector
E3RB-RN21
E3RB-RP21
pre-wired
E3RB-DN11 2M
E3RB-DP11 2M
M12 connector
E3RB-DN21
E3RB-DP21
pre-wired
E3RB-DN12 2M
E3RB-DP12 2M
M12 connector
E3RB-DN22
E3RB-DP22
pre-wired
E3RB-DN13 2M
E3RB-DP13 2M
M12 connector
E3RB-DN23
E3RB-DP23
10 to 50 mm
Transparent detected with
P-opaquing function *2.
100 to 500 mm
with E39-RP1
Transparent detected with
P-opaquing function *2.
0.1 to 2 m
with E39-RP1
Through-beam *1.
15 m
Retro-reflective with MSR
function *2.
0.1 to 3 m
with E39-R1S
Diffuse-reflective
100 mm
300 mm
700 mm
*1. The set type includes the emitter and receiver.
*2. The Reflector is sold separately. Select the Reflector model most suited to the application.
9
E3FA/E3RA/E3FB/E3RB
Reflectors [Refer to Dimensions on page 23.]
Reflectors required for Retro-reflective Sensors: A Reflector is not provided with the Sensor. Be sure to order a Reflector separately.
Sensor
[email protected]
[email protected]
Sensing distance
Model
Quantity
Remarks
0.1 to 4 m
[email protected]
[email protected]
0 to 500 mm
[email protected]
[email protected]
100 to 500 mm
[email protected]
[email protected]
Appearance
E39-R1S
1
for E3FA-R@, E3RA-R@,
E3FB-R@ and E3RB-R@
E39-RP1
1
for E3FA-B@ and E3FB-B@
0.1 to 2 m
Mounting brackets [Refer to Dimensions on page 23.]
A Mounting Bracket is not enclosed with the Sensor. Order a Mounting Bracket separately if required.
Sensor
Appearance
Model (Material)
Quantity
Remarks
all types
E39-L183 (SUS304)
1
Mounting bracket
E3FA-@
E3RA-@
E39-L182 (POM)
1
Flush mounting bracket
Sensor I/O connectors
Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.
Sensor
Size
Cable
Appearance
Cable type
2m
Straight
5m
M12 connector types
M12
Standard
Model
XS2F-M12PVC4S2M
XS2F-M12PVC4S5M
4-wire
Angle
2m
XS2F-M12PVC4A2M
5m
XS2F-M12PVC4A5M
Model Number Legend
E3@-@@@@-(@)@
–1 –2 –3 –4 –5 –6 –7
1. Series name
FA: Cylindrical, Straight type, Plastic housing
RA: Cylindrical, Radial type, Plastic housing
FB: Cylindrical, Straight type, Metal housing
RB: Cylindrical, Radial type, Metal housing
2. Sensing method
T: Through-beam
R: Retro-reflective with MSR function
D: Diffuse-reflective
L: Background suppression
V: Limited distance reflective
B: Transparent detected with P-opaquing function
3. Output
P: PNP
N: NPN
4. Connection
1: Cable
2: Connector, M12, 4-pin
5. Difference of sensing distance, difference of light source
Sequential number
10
6. Emitter/Receiver
D: Receiver
L: Emitter
7. Cable length
Blank: Connector type
e.g., E3FA-TP11 2M;
Cylindrical, Straight type, Plastic housing/ Through-beam/ PNP/
Cable/ Difference of Sensing distance/ Cable length of 2M
E3RA-TN21-D;
Cylindrical, Radial type, Plastic housing/ Through-beam/ NPN/
Connector, M12, 4-pin/ Difference of Sensing distance/
Receiver/ Connector type
E3FA-VP21;
Cylindrical, Straight type, Plastic housing/ Limited distance
reflective/ PNP/ Connector, M12, 4-pin/ Difference of Sensing
distance/ Connector type
E3FA/E3RA/E3FB/E3RB
Ratings and Specifications
Straight type (E3FA/E3FB)
Sensing method
Model NPN
output
Item
PNP
output
Pre-wired
M12 Connector
Pre-wired
M12 Connector
Sensing distance
Spot diameter (reference value)
Standard sensing object
Differential travel
Directional angle
Light source (wavelength)
Power supply voltage
Through-beam
E3F@-TN11 2M
E3F@-TN21
E3F@-TP11 2M
E3F@-TP21
E3FA-TN12 2M
E3FA-TN22
E3FA-TP12 2M
E3FA-TP22
20 m
15 m
Opaque: 7 mm dia.min.
Retro-reflective with
MSR function
E3F@-RN11 2M
E3F@-RN21
E3F@-RP11 2M
E3F@-RP21
0.1 to 4 m
(with E39-R1S)
—
Opaque: 75 mm dia.min.
—
Coaxial Retro-reflective
with MSR function
E3F@-RN12 2M
E3F@-RN22
E3F@-RP12 2M
E3F@-RP22
0 to 500 mm
(with E39-R1S)
2° min.
Red LED (624 nm)
Red LED (624 nm)
Infrared LED (850 nm)
10 to 30 VDC (include voltage ripple of 10%(p-p) max.)
40 mA max.
Current consumption
25 mA max.
(Emitter 25 mA max. Receiver 15 mA max.)
NPN/PNP (open collector)
Control output
Load current: 100 mA max. (Residual voltage: 3 V max.), Load power supply voltage: 30 VDC max.
Operation mode
Light-ON/Dark-ON selectable by wiring
Operation indicator (orange)
Indicator
Stability indicator (green)
Power indicator (green): only Emitter of Through-beam
Protection circuits
Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
Response time
0.5 ms
Sensitivity adjustment
One-turn adjuster
Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max./ Sunlight: 10,000 lx max.
Ambient temperature range
Operating: -25 to 55°C/ Storage: -40 to 70°C (with no icing or condensation)
Ambient humidity range
Operating: 35 to 85%/ Storage: 35 to 95% (with no condensation)
Insulation resistance
20 MΩ min. at 500 VDC
Dielectric strength
1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance
Destruction: 500 m/s2 3 times each in X, Y and Z directions
Degree of protection
IEC: IP67, DIN 40050-9: IP69K *
E3FA: Approx. 110 g/ Approx. 50 g, respectively,
E3FA: Approx. 60 g/ Approx. 50 g,
Weight
Pre-wired cable (2M)
E3FB: Approx. 175 g/ Approx. 65 g, respectively
E3FB: Approx. 95 g/ Approx. 65 g
(packed
state/only
E3FA: Approx. 30 g/ Approx. 10 g, respectively,
E3FA: Approx. 20 g/ Approx. 10 g,
Connector
sensor)
E3FB: Approx. 85 g/ Approx. 20 g, respectively
E3FB: Approx. 50 g/ Approx. 20 g
Case
E3FA: ABS, E3FB: Nickel-brass
Lens and Display
PMMA
Material
Adjuster
POM
Nut
E3FA: POM, E3FB: Nickel-brass
Instruction sheet
Instruction sheet
Accessories
M18 nuts (4 pcs)
M18 nuts (2 pcs)
* IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80°C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water
is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0°, 30°, 60°, and 90° from
the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
11
E3FA/E3RA/E3FB/E3RB
Straight type (E3FA/E3FB)
Sensing method
Model NPN
Pre-wired
output
M12 Connector
Pre-wired
PNP
output
Item
M12 Connector
Sensing distance
Spot diameter (reference value)
Standard sensing object
Differential travel
Directional angle
Light source (wavelength)
Power supply voltage
Current consumption
E3F@-DN11 2M
E3F@-DN21
E3F@-DP11 2M
E3F@-DP21
100 mm
(white paper:
300 × 300 mm)
40 × 45 mm
Sensing distance
of 100 mm
E3F@-DN12 2M
E3F@-DN22
E3F@-DP12 2M
E3F@-DP22
300 mm
(white paper:
300 × 300 mm)
40 × 50 mm
Sensing distance
of 300 mm
Diffuse-reflective
E3F@-DN13 2M E3FA-DN14 2M
E3F@-DN23
E3FA-DN24
E3F@-DP13 2M E3FA-DP14 2M
E3F@-DP23
E3FA-DP24
1m
100 mm
(white paper:
(white paper:
300 × 300 mm) 300 × 300 mm)
40 × 45 mm
120 × 150 mm
Sensing distance Sensing distance
of 1 m
of 100 mm
—
E3FA-DN15 2M
E3FA-DN25
E3FA-DP15 2M
E3FA-DP25
300 mm
(white paper:
300 × 300 mm)
40 × 50 mm
Sensing distance
of 300 mm
E3FA-DN16 2M
E3FA-DN26
E3FA-DP16 2M
E3FA-DP26
1m
(white paper:
300 × 300 mm)
120 × 150 mm
Sensing distance
of 1 m
20% max.
—
Infrared LED (850 nm)
Red LED (624 nm)
10 to 30 VDC (include voltage ripple of 10%(p-p) max.)
25 mA max.
NPN/PNP (open collector)
Control output
Load current: 100 mA max. (Residual voltage: 3 V max.), Load power supply voltage: 30 VDC max.
Operation mode
Light-ON/Dark-ON selectable by wiring
Operation indicator (orange)
Indicator
Stability indicator (green)
Protection circuits
Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
Response time
0.5 ms
Sensitivity adjustment
One-turn adjuster
Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max./ Sunlight: 10,000 lx max.
Ambient temperature range
Operating: -25 to 55°C/ Storage: -40 to 70°C (with no icing or condensation)
Ambient humidity range
Operating: 35 to 85%/ Storage: 35 to 95% (with no condensation)
Insulation resistance
20 MΩ min. at 500 VDC
Dielectric strength
1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance
Destruction: 500 m/s2 3 times each in X, Y and Z directions
Degree of protection
IEC: IP67, DIN 40050-9: IP69K *
E3FA: Approx. 60 g/ Approx. 50 g,
Weight
Pre-wired cable (2M)
E3FB: Approx. 95 g/ Approx. 65 g
(packed
state/only
E3FA: Approx. 20 g/ Approx. 10 g,
Connector
sensor)
E3FB: Approx. 50 g/ Approx. 20 g
Case
E3FA: ABS, E3FB: Nickel-brass
Lens and Display
PMMA
Material
Adjuster
POM
Nut
E3FA: POM, E3FB: Nickel-brass
Instruction sheet
Accessories
M18 nuts (2 pcs)
* IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80°C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water
is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0°, 30°, 60°, and 90° from
the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
12
E3FA/E3RA/E3FB/E3RB
Straight type (E3FA/E3FB)
Limited distance
Transparent detected with
reflective
P-opaquing function
Model NPN
Pre-wired
E3F@-LN11 2M
E3F@-LN12 2M
E3F@-VN11 2M
E3F@-BN11 2M
E3F@-BN12 2M
output
M12 Connector E3F@-LN21
E3F@-LN22
E3F@-VN21
E3F@-BN21
E3F@-BN22
Pre-wired
E3F@-LP11 2M
E3F@-LP12 2M
E3F@-VP11 2M
E3F@-BP11 2M
E3F@-BP12 2M
PNP
output
Item
M12 Connector E3F@-LP21
E3F@-LP22
E3F@-VP21
E3F@-BP21
E3F@-BP22
100 mm
200 mm
10 to 50 mm
100 to 500 mm
0.1 to 2 m
Sensing distance
(white paper:
(white paper:
(glass(t = 1.0 mm):
(with E39-RP1)
(with E39-RP1)
300 × 300 mm)
300 × 300 mm)
150 × 150 mm)
10 × 10 mm
10 × 15 mm
10 × 10 mm
Spot diameter (reference value)
Sensing distance of Sensing distance of Sensing distance of
—
100 mm
200 mm
50 mm
Standard sensing object
—
glass(t = 1.0 mm): 150 × 150 mm
Differential travel
20% max.
—
Directional angle
—
Light source (wavelength)
Red LED (624 nm)
Power supply voltage
10 to 30 VDC (include voltage ripple of 10%(p-p) max.)
Current consumption
25 mA max.
NPN/PNP (open collector)
Control output
Load current: 100 mA max. (Residual voltage: 3 V max.), Load power supply voltage: 30 VDC max.
Operation mode
Light-ON/Dark-ON selectable by wiring
Operation indicator (orange)
Indicator
Stability indicator (green)
Protection circuits
Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
Response time
0.5 ms
Sensitivity adjustment
Fixed
One-turn adjuster
Ambient illumination
Incandescent lamp: 3,000 lx max./ Sunlight: 10,000 lx max.
(Receiver side)
Ambient temperature range
Operating: -25 to 55°C/ Storage: -40 to 70°C (with no icing or condensation)
Ambient humidity range
Operating: 35 to 85%/ Storage: 35 to 95% (with no condensation)
Insulation resistance
20 MΩ min. at 500 VDC
Dielectric strength
1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance
Destruction: 500 m/s2 3 times each in X, Y and Z directions
Degree of protection
IEC: IP67, DIN 40050-9: IP69K *
E3FA: Approx. 60 g/ Approx. 50 g,
Weight
Pre-wired cable (2M)
E3FB: Approx. 95 g/ Approx. 65 g
(packed
state/only
E3FA: Approx. 20 g/ Approx. 10 g,
Connector
sensor)
E3FB: Approx. 50 g/ Approx. 20 g
Case
E3FA: ABS, E3FB: Nickel-brass
Lens and Display
PMMA
Material
Adjuster
POM
Nut
E3FA: POM, E3FB: Nickel-brass
Instruction sheet
Accessories
M18 nuts (2 pcs)
Sensing method
BGS (Background suppression)
* IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80°C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water
is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0°, 30°, 60°, and 90° from
the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
13
E3FA/E3RA/E3FB/E3RB
Radial type (E3RA/E3RB)
Sensing method
Model NPN
output
Item
PNP
output
Pre-wired
M12 Connector
Pre-wired
M12 Connector
Sensing distance
Through-beam
E3R@-TN11 2M
E3R@-TN21
E3R@-TP11 2M
E3R@-TP21
15 m
Spot diameter (reference value)
Standard sensing object
Differential travel
Directional angle
Light source (wavelength)
Power supply voltage
Current consumption
Control output
Operation mode
Indicator
Protection circuits
Response time
Sensitivity adjustment
Ambient illumination
(Receiver side)
Ambient temperature range
Ambient humidity range
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
Pre-wired cable (2M)
Weight
(packed
state/only
sensor)
Connector
Material
Case
Lens and Display
Adjuster
Nut
Accessories
Retro-reflective
with MSR function
E3R@-RN11 2M
E3R@-RN21
E3R@-RP11 2M
E3R@-RP21
0.1 to 3 m
(with E39-R1S)
—
Opaque:
7 mm dia.min.
Diffuse-reflective
E3R@-DN11 2M
E3R@-DN21
E3R@-DP11 2M
E3R@-DP21
100 mm
(white paper:
300 × 300 mm)
35 × 40 mm
Sensing distance
of 100 mm
Opaque:
75 mm dia.min.
—
E3R@-DN12 2M
E3R@-DN22
E3R@-DP12 2M
E3R@-DP22
300 mm
(white paper:
300 × 300 mm)
40 × 45 mm
Sensing distance
of 300 mm
—
20% max.
2° min.
—
Red LED (624 nm)
10 to 30 VDC (include voltage ripple of 10%(p-p) max.)
40mA max.
(Emitter 25 mA
25 mA max.
max. Receiver 15
mA max.)
NPN/PNP (open collector)
Load current: 100 mA max. (Residual voltage: 2 V max.), Load power supply voltage: 30 VDC max.
Light-ON/Dark-ON selectable by wiring
Operation indicator (orange)
Stability indicator (green)
Power indicator (green): only Emitter of Through-beam
Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
0.5 ms
One-turn adjuster
Incandescent lamp: 3,000 lx max./ Sunlight: 10,000 lx max.
Operating: -25 to 55°C/ Storage: -40 to 70°C (with no icing or condensation)
Operating: 35 to 85%/ Storage: 35 to 95% (with no condensation)
20 MΩ min. at 500 VDC
1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case
Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z directions
Destruction: 500 m/s2 3 times each in X, Y and Z directions
IEC: IP67, DIN 40050-9: IP69K *
E3RA:
Approx. 110 g/
Approx. 50 g,
respectively,
E3RA: Approx. 60 g/ Approx. 50 g,
E3RB:
E3RB: Approx. 95 g/ Approx. 65 g
Approx. 175 g/
Approx. 65 g,
respectively
E3RA:
Approx. 30 g/
Approx. 10 g,
respectively,
E3RA: Approx. 20 g/ Approx. 10 g,
E3RB:
E3RB: Approx. 50 g/ Approx. 20 g
Approx. 85 g/
Approx. 20 g,
respectively
E3RA: ABS, E3RB: Nickel-brass
PMMA
POM
E3RA: POM, E3RB: Nickel-brass
Instruction sheet
Instruction sheet
M18 nuts (4 pcs)
M18 nuts (2 pcs)
* IP69K Degree of Protection Specifications
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80°C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water
is 14 to 16 liters per minute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0°, 30°, 60°, and 90° from
the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
14
E3R@-DN13 2M
E3R@-DN23
E3R@-DP13 2M
E3R@-DP23
700 mm
(white paper:
300 × 300 mm)
90 × 120 mm
Sensing distance
of 700 mm
E3FA/E3RA/E3FB/E3RB
Engineering Data (Reference Value)
Parallel Operating Range
Through-beam Models
E3F@-T@, E3R@-T@
E3F@-T@@1
800
600
400
200
Distance Y (mm)
Distance Y (mm)
1000
Y
150
E3F@-R@@1
X
100
50
200
0
−400
E3R@-T@@1
−600
−800
5
10
15
20
25
30
35
40
Distance X (m)
−50
−10
−100
−20
−150
−30
2
Y
X
20
0
−200
0
Reflector: E39-R1S
30
0
E3FA-T@@2
X
40
10
E3R@-R@@1
Y
−200
−1000
0
Reflector: E39-R1S
Distance Y (mm)
Retro-reflective Models (with MSR function)
E3F@[email protected], E3R@[email protected]
E3F@[email protected]
4
−40
0
6
8
Distance X (m)
0.5
1
1.5
Distance X (m)
40
Distance Y (mm)
Distance Y (mm)
Transparent detected with P-opaquing function
E3F@[email protected]
E3F@[email protected]
Reflector: E39-RP1
30
20
150
Reflector: E39-RP1
100
50
10
Y
0
Y
0
X
−10
X
−50
−20
−100
−40
0
200
400
600
Sensing object: white paper
20
E3F@-D@@1
E3R@-D@@1
E3F@-D@@2
E3R@-D@@2
10
500 1000 1500 2000 2500 3000 3500 4000 4500
Distance X (mm)
E3F@[email protected], E3R@[email protected]
Distance Y (mm)
Distance Y (mm)
Operating Range
Diffuse-reflective Models
E3F@[email protected], E3F@[email protected]
E3R@[email protected], E3R@[email protected]
30
−150
0
800
1000 1200
Distance X (mm)
100
[email protected], [email protected]
Sensing object: 300 × 300 (mm) white paper
80
60
40
E3R@-D@@3
Distance Y (mm)
−30
20
−10
E3F@-D@@3
X
100
200
300
400
500 600
Distance X (mm)
−20
−40
−40
60
40
40
0
0
−20
−10
−40
Sensing object: white paper
600
800
1000 1200 1400 1600
Distance X (mm)
−40
0
400
500
600
700
Distance X (mm)
10
Sensing object: glass (t=1.0 mm)
8
6
4
−2
E3F@[email protected]
−4
Z
X
400
300
0
−30
200
200
2
Y
−80
X
100
E3F@[email protected]
−20
−60
−100
0
Limited distance reflective
E3F@-V@
20
10
−100
0
X
200 400 600 800 1000 1200 1400 1600 1800
Distance X (mm)
30
20
Y
−80
Distance Y (mm)
Sensing object: 300 × 300 (mm) white paper
80
Distance Z (mm)
Distance Y (mm)
100
−100
0
E3FA-D@@5
−60
Y
BGS Models
E3F@[email protected], E3F@[email protected]
[email protected]
E3FA-D@@4
40
0
−80
−30
0
60
−20
−60
Y
−20
Sensing object: white paper
80
20
0
0
100
−6
Y
−8
X
50
100
150
200
250
Distance X (mm)
−10
0
X
20
40
60
Distance X (mm)
15
E3FA/E3RA/E3FB/E3RB
100
70
50
30
10
7
5
3
E3F@-T@@1
Excess gain ratio (multiple)
Retro-reflective Models (with MSR function)
E3F@[email protected], E3R@[email protected]
E3F@[email protected]
Excess gain ratio (multiple)
Excess gain ratio (multiple)
Excess Gain vs. Distance
Through-beam Models
E3F@-T@, E3R@-T@
100
70 Reflector: E39-R1S
50
30
10
7
5
E3F@-R@@1
3
100
70 Reflector: E39-R1S
50
30
10
7
5
3
E3R@-R@@1
Operating 1
level
0.7
0.5
Operating 1
level
Operating 1
level
0.3
0.3
0.7
0.5
E3FA-T@@2
0.3
0.7
0.5
E3R@-T@@1
10
20
30
40
50
60
0.1
70
0
2
4
6
8
Distance (m)
E3F@[email protected], E3R@[email protected]
Excess gain ratio (multiple)
Excess gain ratio (multiple)
Diffuse-reflective Models
E3F@[email protected], E3F@[email protected]
E3R@[email protected], E3R@[email protected]
100
70 Sensing object: 100 × 100 (mm) white paper
50
30
10
7
5
E3F@-D@@2
E3R@-D@@2
3
Operating 1
level
30
10
7
5
3
E3F@-D@@3
0.7
0.5
0.3
0.1
200
400
600
800
0.1
1000
10
7
5
3
E3FA-D@@5
E3FA-D@@4
0.7
0.5
0.3
0
0.5
1
1.5
2
2.5
0.1
3
30
10
7
5
3
100
70 Reflector: E39-RP1
50
30
10
7
5
3
Operating 1
level
Operating 1
level
0.3
0.3
0.7
0.5
E3F@[email protected]
0
200
400
600
800
1000
Distance (mm)
1
1.5
2
2.5
3
0.1
100
70 Sensing object: glass (t=1.0 mm)
50
30
10
7
5
3
Operating 1
level
0.7
0.5
Distance (m)
16
2
30
Distance (m)
Excess gain ratio (multiple)
Excess gain ratio (multiple)
100
70 Sensing object: 300 × 300 (mm) white paper
50
0.5
1.5
Transparent detected with P-opaquing function Limited distance reflective
E3F@[email protected], E3F@[email protected]
E3F@-V@
[email protected]
0
1
100
70 Sensing object: 300 × 300 (mm) white paper
50
Operating 1
level
E3R@-D@@3
Distance (mm)
0.1
0.5
Distance (m)
0.3
0
0
[email protected], [email protected]
100
70 Sensing object: 300 × 300 (mm) white paper
50
Operating 1
level
E3F@-D@@1
E3R@-D@@1
0.7
0.5
0.1
10
Distance (m)
Excess gain ratio (multiple)
0
Excess gain ratio (multiple)
0.1
0.7
0.5
E3F@[email protected]
0
1
0.3
2
3
4
Distance (m)
0.1
0
10
20
30
40
50
60
70
Distance (mm)
E3FA/E3RA/E3FB/E3RB
700
Sensing object: White paper
600
E3F@-D@@2
E3R@-D@@2
500
E3F@[email protected], E3R@[email protected]
Distance (mm)
Distance (mm)
Sensing Object Size vs. Distance
Diffuse-reflective Models
E3F@[email protected], E3F@[email protected]
E3R@[email protected], E3R@[email protected]
2000
Sensing object: White paper
1800
1600
E3F@-D@@3
1400
1200
400
E3R@-D@@3
d
300
1000
d
800
E3F@-D@@1
E3R@-D@@1
200
600
400
d
100
200
d
0
0
50
100
Sensing object: White paper
900
800
d
700
d
600
50 100 150 200 250 300 350 400 450 500
Length d of sensing object (mm)
[email protected]
Distance (mm)
Distance (mm)
[email protected], [email protected]
1000
0
0
150
200
250
300
Length d of sensing object (mm)
1600
Sensing object: White paper
1400
1200
1000
500
800
[email protected]
400
d
600
300
d
[email protected]
400
200
200
100
0
0
50
100
0
0
150
200
250
300
Length d of sensing object (mm)
50
100
150
200
250
300
Length d of sensing object (mm)
Sensing distance (mm)
Sensing distance (mm)
Sensing Distance vs. Sensing Object Material
BGS Models
E3F@[email protected]
E3F@[email protected]
120
100
80
250
200
150
60
100
40
50
20
0
0
White paper
Black paper
White paper
SUS
Black paper
SUS
Material
Material
2.5
250 mm
2.0
500 mm
1.5
1.0
Operating
level
Relative amount of light received
Relative amount of light received
Dark Excess Gain vs. Sensing Object Characteristics
Transparent detected with P-opaquing function
E3F@[email protected]
E3F@[email protected]
2.5
2.0
1m
2m
1.5
1.0
Operating
level
0.5
0.5
0.0
0.0
No sensing
object
Empty
Filled with
water
Round, 500-ml
PET bottle
Empty
Filled with
water
Square,500-ml
PET bottle
No sensing
object
Empty
Filled with
water
Round, 500-ml
PET bottle
Empty
Filled with
water
Square,500-ml
PET bottle
17
E3FA/E3RA/E3FB/E3RB
180
160
140
120
100
80
[email protected]
Sensing distance (mm)
Sensing distance (mm)
Sensing distance (mm)
Object Surface Color vs. Sensing Distance
Diffuse-reflective Models
[email protected]
[email protected]
700
600
500
400
1800
1600
1400
1200
1000
800
300
60
600
200
40
400
100
20
0
0
Red
paper
Green
paper
Blue
paper
Black
paper
0
White
paper
Green
paper
Blue
paper
180
160
140
120
100
White
paper
Black
paper
[email protected]
Sensing distance (mm)
[email protected]
Red
paper
Red
paper
Green
paper
Blue
paper
Black
paper
Red
paper
Green
paper
Blue
paper
Black
paper
[email protected]
Sensing distance (mm)
White
paper
Sensing distance (mm)
200
700
600
500
400
1600
1400
1200
1000
800
80
300
600
60
200
400
40
100
20
200
0
0
White
paper
Red
paper
Green
paper
Blue
paper
Black
paper
0
White
paper
Red
paper
Green
paper
Blue
paper
Black
paper
White
paper
Output circuit diagram
PNP Output
Model
Operation
mode
Light-ON
Operation
selector
Timing charts
Output circuit
Through-beam Receivers, Retro-reflective Models,
Diffuse-reflective Models, Limited reflective Models.
Connect the
Transparent detected with P-opaquing function.
pink wire
10 to 30 VDC
(Pin(2)) to the
Brown
Stability
Operation
1
brown (Pin(1))
indicator
indicator
Light incident
Light interrupted
Operation indicator ON
(orange)
OFF
ON
Output transistor
OFF
Operate
Load
(e.g., relay)
Reset
(Orange)
(Between blue
and black leads)
E3F@-TP@
E3F@-RP@
E3F@-DP@
E3F@-VP@
E3F@-BP@
E3R@-TP@
E3R@-RP@
E3R@-DP@
Dark-ON
Light incident
Light interrupted
Operation indicator ON
(orange)
OFF
ON
Output transistor
OFF
Load
Operate
(e.g., relay)
Reset
(Between blue
and black leads)
(Green)
Photoelectric
Sensor
Main
Circuit
Connect the
pink wire
(Pin(2)) to the
blue (Pin(3))
or open the
pink wire
(Pin(2))
Light-ON
Black
4
100 mA max.
(Control output)
Load
(Relay)
Blue
3
2
0V
Pink
Dark-ON
Through-beam Emitter
Power
indicator
(green)
Brown
1
Photoelectric
Sensor
Main
Circuit
10 to 30 VDC
Blue
3
NEAR
FAR
Operation indicator ON
(orange)
OFF
Light-ON
Output transistor
Load
(e.g., relay)
ON
OFF
Operate
Reset
(Between blue
and black leads)
E3F@-LP@
NEAR
FAR
Operation indicator ON
(oramge)
OFF
Dark-ON
Output transistor
Load
(e.g., relay)
ON
OFF
Operate
Reset
(Between blue
and black leads)
18
Background suppression.
Connect the
pink wire
(Pin(2)) to the
brown (Pin(1))
Connect the
pink wire
(Pin(2)) to the
blue (Pin(3))
or open the
pink wire
(Pin(2))
Operation
indicator
(Orange)
Stability
indicator
(Green)
Photoelectric
Sensor
Main
Circuit
1
Brown
10 to 30 VDC
Light-ON
Black
4
Blue
100 mA max.
(Control output)
Load
(Relay)
3
2
0V
Pink
Dark-ON
E3FA/E3RA/E3FB/E3RB
NPN Output
Operation
mode
Model
Light-ON
E3F@-TN@
E3F@-RN@
E3F@-DN@
E3F@-VN@
E3F@-BN@
E3R@-TN@
E3R@-RN@
E3R@-DN@
Dark-ON
Operation
selector
Timing charts
Light incident
Light interrupted
Operation indicator ON
(orange)
OFF
ON
Output transistor
OFF
Operate
Load
(e.g., relay)
Reset
(Between brown
and black leads)
Output circuit
Through-beam Receivers, Retro-reflective Models,
Connect the
Diffuse-reflective Models, Limited reflective Models.
pink wire
(Pin(2)) to the Transparent detected with P-opaquing function.
brown (Pin(1))
10 to 30 VDC
Brown
Stability
Operation
1
or open the
indicator
indicator
Light-ON
Load
(Green)
(Orange)
pink wire
(Relay)
Black
(Pin(2))
Photo100 mA max.
4
electric
Sensor
Main
Circuit
Light incident
Light interrupted
Operation indicator ON
(orange)
OFF
ON
Output transistor
OFF
Load
Operate
(e.g., relay)
Reset
(Between brown
and black leads)
(Control output)
3
Connect the
pink wire
(Pin(2)) to the
blue (Pin(3))
2
Blue
0V
Dark-ON
Pink
Through-beam Emitter
Power
indicator
(green)
Brown
1
Photoelectric
Sensor
Main
Circuit
10 to 30 VDC
Blue
3
NEAR
FAR
Operation indicator ON
(orange)
OFF
Light-ON
Output transistor
Load
(e.g., relay)
ON
OFF
Operate
Reset
(Between brown
and black leads)
E3F@-LN@
NEAR
Dark-ON
Load
(e.g., relay)
ON
OFF
Operate
Reset
(Between brown
and black leads)
1
4
3
Connect the
pink wire
(Pin(2)) to the
blue (Pin(3))
2
100 mA max.
(Control output)
Blue
0V
Pink
Connectors (Sensor I/O connectors)
M12 Connector Pin Arrangement
M12 4-wire Connectors
1
Load
(Relay)
Black
Connector Pin Arrangement
2
10 to 30 VDC
Brown
Light-ON
electric
Sensor
Main
Circuit
FAR
Operation indicator ON
(oramge)
OFF
Output transistor
Background suppression.
Connect the
pink wire
(Pin(2)) to the
brown (Pin(1))
Stability
Operation
or open the
indicator
indicator
(Green)
(Orange)
pink wire
(Pin(2))
Photo-
Dark-ON
Pin No.
4
2
3
1
3
4
Classification
DC
Wire color
Brown
White
Blue
Black
1
2
3
4
Wire color
Connector pin No.
Application
Brown
➀
➁
➂
➃
Power supply (+V)
White
Blue
Black
L/on · D/on selectable
Power supply (0 V)
Output
19
E3FA/E3RA/E3FB/E3RB
Nomenclature
Straight type, Plastic housing
with an adjuster:
E3FA-T@-D
E3FA-R@
E3FA-D@
E3FA-V@
E3FA-B@
without an adjuster:
E3FA-T@-L *
E3FA-L@
Stability indicator
(Green)
Radial type, Plastic housing
with an adjuster:
E3RA-T@-D
E3RA-R@
E3RA-D@
without an adjuster:
E3RA-T@-L *
Sensitivity adjuster
Sensitivity adjuster
Operation indicator
(Orange)
Stability indicator
(Green)
Operation indicator
(Orange)
* The Emitter has two Power indicators (Green) instead of the Stability indicator (Green) and the Operation indicator (Orange).
Straight type, Metal housing
with an adjuster:
E3FB-T@-D
E3FB-R@
E3FB-D@
E3FB-V@
E3FB-B@
without an adjuster:
E3FB-T@-L *
E3FB-L@
Stability indicator
(Green)
Radial type, Metal housing
with an adjuster:
E3RB-T@-D
E3RB-R@
E3RB-D@
without an adjuster:
E3RB-T@-L *
Sensitivity adjuster
Sensitivity adjuster
Operation indicator
(Orange)
Stability indicator
(Green)
Operation indicator
(Orange)
* The Emitter has two Power indicators (Green) instead of the Stability indicator (Green) and the Operation indicator (Orange).
Safety Precautions
Refer to Warranty and Limitations of Liability.
WARNING
This product is not designed or rated for directly or
indirectly ensuring safety of persons. Do not use it
for such a purpose.
CAUTION
Never use the product with an AC power supply.
Do not use the product with voltage in excess of the
rated voltage.
Do not use the product with incorrect wiring.
Otherwise, explosion, fire, malfunction may result.
Precautions for Safe Use
Be sure to follow the safety precautions below for added safety.
1. Do not use the sensor under the environment with explosive,
flammable or corrosive gas.
2. Do not use the sensor under the oil or chemical environment.
3. Do not use the sensor in the water, rain or outdoors.
4. Do not use the sensor in the environment where humidity is high
and condensation may occur.
20
5. Do not use the sensor under the environment under the other
conditions in excess of rated.
6. Do not use the sensor in place that is exposed by direct sunlight.
7. Do not use the sensor in place where the sensor may receive
direct vibration or shock.
8. Do not use the thinner, alcohol, or other organic solvents.
9. Never disassemble, repair nor tamper with the sensor.
10.Please process it as industrial waste.
Precautions for Correct Use
1. Laying Sensor wiring in the same conduit or duct as high-voltage
wires or power lines may result in malfunction or damage due to
conduit or use shielded cable.
2. Do not pull on the cable with excessive force.
3. If a commercial switching regulator is used, ground the FG (frame
ground) terminal.
4. The sensor will be available 100 ms after the power supply is tuned
ON. Start to use the sensor 100 ms or more after turning ON the
power supply. If the load and the sensor are connected to separate
power supplies, be sure to turn ON the sensor first.
5. Output pulses may be generated even when the power supply is
OFF. Therefore, it is recommended to first turn OFF the power
supply for the load or the load line.
6. The sensor must be mounted using the provided nuts. The proper
tightening torque range of E3FA/E3RA plastic housing series is
between 0.4 and 0.5 N•m. The proper tightening torque of E3FB/
E3RB metal housing series is 20 N•m max..
E3FA/E3RA/E3FB/E3RB
(Unit: mm)
Dimensions
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
Sensors (E3FA/E3RA Plastic housing)
E3FA series
Pre-wired Models
[email protected]@
[email protected]@
[email protected]@
[email protected]@
[email protected]
[email protected]@
Front view
Left side view
15
E3FA series
M12 Connector Models
[email protected]@
[email protected]@
[email protected]@
[email protected]@
[email protected]
[email protected]@
Emitter
Optical axis
Suitable models
[email protected]
[email protected]@
[email protected]@
[email protected]
[email protected]
* Suitable models
[email protected]@-D
[email protected]
[email protected]@
[email protected]
[email protected]
Right side view
Sensitivity adjuster *
45
Left side view
15
34.5
2
7 dia.
M18 × 30.5 P=1
Receiver
15
Operation indicator (orange)
Stability indicator (green)
2
Emitter
18.5+0.5
dia.
0
1
Rear view
Receiver
7
4
Terminal No.
Specification
1
+V
2
L/on · D/on selectable
3
0V
4
Output
Front view
Optical axis
Emitter
5.2
3
* Suitable models
[email protected]@-D
[email protected]
[email protected]@
[email protected]
[email protected]
Suitable models
[email protected]
[email protected]@
[email protected]@
[email protected]
[email protected]
Rear view
M12 × 4 P=1
23
30.5
Optical axis
Optical axis
Mounting Holes
16.6 dia.
7
Suitable models
[email protected]@
[email protected]
[email protected]
18.5+0.5
0 dia.
Vinyl insulated round cable 4 dia. 4 cores
(conductor cross sectional area:0.128 mm2 (AWG26)
/insulation outside diameter:0.85 dia.)
standard length 2 m
Front view
Optical axis
E3RA series
Pre-wired Models
[email protected]
[email protected]
E3RA-D@1@
23
30.5
Optical axis
Left side view
Mounting Holes
Stability indicator (green)
16.6 dia.
7
Suitable models
E3FA-T@1@
E3FA-R@12
E3FA-B@11
Operation indicator (orange)
2
7 dia.
M18 × 30.5 P=1
Receiver
15
Sensitivity adjuster *
41
34.5
Left side view
M18 × 30.5 P=1
14.1 dia.
5.2
14.9
Mounting Holes
35.9
43.4
47.4
53.9
18.5+0.5
0 dia.
7 dia.
Stability
indicator (green)
Suitable models
E3RA-T@11
E3RA series
M12 Connector Models
E3RA-T@21
E3RA-R@21
E3RA-D@2@
Suitable models
E3RA-R@11
E3RA-D@1@
Rear view
Vinyl insulated round cable 4 dia. 4 cores
(conductor cross sectional area:0.128 mm2 (AWG26)
/insulation outside diameter:0.85 dia.)
standard length 2 m
Rear view
Optical axis
Receiver
5.2
7
Sensitivity adjuster
Operation indicator (orange)
Front view
Optical axis
Emitter
M18 × 30.5 P=1
14.1 dia.
5.2
14.9
Mounting Holes
35.9
43.4
47.4
57.9
18.5+0.5
0 dia.
7 dia.
Stability
indicator (green)
Sensitivity adjuster
Operation indicator (orange)
M12 × 4 P=1
Suitable models
E3RA-T@21
Suitable models
E3RA-R@21
E3RA-D@2@
Bottom view
3
2
4
1
Terminal No.
Specification
1
+V
2
L/on · D/on selectable
3
0V
4
Output
21
E3FA/E3RA/E3FB/E3RB
Sensors (E3FB/E3RB Metal housing)
E3FB series
Pre-wired Models
E3FB-T@11
E3FB-R@1@
E3FB-D@1@
E3FB-L@1@
E3FB-V@11
E3FB-B@1@
Front view
Left side view
Mounting Holes
Stability indicator (green)
18.5+0.5
0 dia.
7
Emitter
Optical axis
Vinyl insulated round cable 4 dia. 4 cores
(conductor cross sectional area:0.128 mm2 (AWG26)
/insulation outside diameter:0.85 dia.)
standard length 2 m
23
29.9
Optical axis
Suitable models
E3FB-R@11
E3FB-D@1@
E3FB-L@1@
E3FB-V@11
E3FB-B@12
* Suitable models
E3FB-T@11-D
E3FB-R@12
E3FB-D@1@
E3FB-V@11
E3FB-B@12
Front view
Right side view
Sensitivity adjuster *
48
Left side view
Left side view
37.5
Operation indicator (orange)
7 dia.
M18 × 26.4 P=1
Receiver
Stability indicator (green)
2
Mounting Holes
18.5+0.5
0 dia.
1
7
Emitter
Optical axis
Rear view
Optical axis
Receiver
7
4
Terminal No.
Specification
1
+V
2
L/on · D/on selectable
3
0V
4
Output
Front view
Optical axis
Emitter
5.2
3
* Suitable models
E3FB-T@21-D
E3FB-R@22
E3FB-D@2@
E3FB-V@21
E3FB-B@22
Suitable models
E3FB-R@21
E3FB-D@2@
E3FB-L@2@
E3FB-V@21
E3FB-B@22
Rear view
M12 × 4 P=1
23
29.9
Optical axis
Suitable models
E3FB-T@21
E3FB-R@22
E3FB-B@21
E3RB series
Pre-wired Models
E3RB-T@11
E3RB-R@11
E3RB-D@1@
Operation indicator (orange)
7 dia.
M18 × 26.4 P=1
Receiver
Suitable models
E3FB-T@11
E3FB-R@12
E3FB-B@11
E3FB series
M12 Connector Models
E3FB-T@21
E3FB-R@2@
E3FB-D@2@
E3FB-L@2@
E3FB-V@21
E3FB-B@2@
Sensitivity adjuster *
44
37.5
Left side view
M18 × 26.4 P=1
14.1 dia.
5.2
13
Mounting Holes
35.9
42.8
50.4 56.9
18.5+0.5
0 dia.
7 dia.
Stability
indicator (green)
Suitable models
E3RB-T@11
E3RB series
M12 Connector Models
E3RB-T@21
E3RB-R@21
E3RB-D@2@
Suitable models
E3RB-R@11
E3RB-D@1@
Rear view
Vinyl insulated round cable 4 dia. 4 cores
(conductor cross sectional area:0.128 mm2 (AWG26)
/insulation outside diameter:0.85 dia.)
standard length 2 m
Rear view
Optical axis
Receiver
5.2
7
Sensitivity adjuster
Operation indicator (orange)
Front view
Optical axis
Emitter
M18 × 26.4 P=1
14.1 dia.
5.2
13
Mounting Holes
35.9
42.8
50.4
18.5+0.5
0 dia.
60.9
7 dia.
Stability
indicator (green)
M12 × 4 P=1
Suitable models
E3RB-T@21
22
Suitable models
E3RB-R@21
E3RB-D@2@
Sensitivity adjuster
Operation indicator (orange)
Bottom view
3
2
4
1
Terminal No.
Specification
1
+V
2
L/on · D/on selectable
3
0V
4
Output
E3FA/E3RA/E3FB/E3RB
Attached nut
4
24 dia.
Three, 24
M18
Material:POM(for E3FA/E3RA)
Nickel-brass(for E3FB/E3RB)
4 P=1
Accessories (Order Separately)
Reflectors
E39-R1S
E39-RP1
3
34
Two, 3.5 dia.
8.5
44
40.3
7.5
7
0.2
59.9
80
52
72 63.6
Reflector
8
2.7
1.6
Material,
reflective surface: acrylic
Rear surface: ABS
Mounting brackets
E39-L183
Two, 3.5 dia.
Mounting brackets
E39-L182
42
4.3
Two, R15
22
Two, 30°
Two, 4.3
37
14.5 12.5
15
1.5
(R16.5)
27 dia.
90°
18.2 dia.
15.1
36.5
16.7 dia.
20
23
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON Corporation
Industrial Automation Company
Authorized Distributor:
Tokyo, JAPAN
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen, Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
© OMRON Corporation 2012 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
Printed in Japan
CSM_4_1_0514
Cat. No. E423-E1-03
1013(0612)
Similar pages