VISHAY 50WQ03FNTRPBF

VS-50WQ03FNPbF
Vishay Semiconductors
Schottky Rectifier, 5.5 A
FEATURES
Base
cathode
4, 2
• Popular D-PAK outline
• Small foot print, surface mountable
• Low forward voltage drop
1
Anode
D-PAK (TO-252AA)
3
Anode
• High frequency operation
• Guard ring for enhanced ruggedness and long term
reliability
• Compliant to RoHS Directive 2002/95/EC
PRODUCT SUMMARY
Package
D-PAK (TO-252AA)
IF(AV)
5.5 A
VR
30 V
VF at IF
See Electrical table
IRM
58 mA at 125 °C
TJ max.
150 °C
Diode variation
Single die
EAS
10 mJ
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
DESCRIPTION
The VS-50WQ03FNPbF surface mount Schottky rectifier
has been designed for applications requiring low forward
drop and small foot prints on PC board. Typical applications
are in disk drives, switching power supplies, converters,
freewheeling diodes, battery charging, and reverse battery
protection.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
CHARACTERISTICS
IF(AV)
VALUES
UNITS
5.5
A
30
V
Rectangular waveform
VRRM
IFSM
tp = 5 μs sine
320
A
VF
5 Apk, TJ = 125 °C
0.35
V
TJ
Range
- 40 to 150
°C
VOLTAGE RATINGS
PARAMETER
SYMBOL
Maximum DC reverse voltage
VS-50WQ03FNPbF
UNITS
30
V
VR
Maximum working peak reverse voltage
VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
5.5
A
Maximum average forward current
See fig. 5
IF(AV)
Maximum peak one cycle
non-repetitive surge current
See fig. 7
IFSM
Non-repetitive avalanche energy
EAS
TJ = 25 °C, IAS = 2 A, L = 5 mH
10
mJ
Repetitive avalanche current
IAR
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical
2.0
A
Document Number: 94232
Revision: 14-Jan-11
50 % duty cycle at TC = 136 °C, rectangular waveform
5 μs sine or 3 μs rect. pulse
10 ms sine or 6 ms rect. pulse
Following any rated
load condition and with
rated VRRM applied
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
320
A
130
www.vishay.com
1
VS-50WQ03FNPbF
Schottky Rectifier, 5.5 A
Vishay Semiconductors
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
5A
Maximum forward voltage drop
See fig. 1
VFM (1)
TJ = 25 °C
10 A
5A
TJ = 125 °C
10 A
Maximum reverse leakage current
See fig. 2
IRM (1)
Threshold voltage
VF(TO)
TJ = 25 °C
VR = Rated VR
TJ = 125 °C
TJ = TJ maximum
VALUES
UNITS
0.46
0.53
V
0.35
0.46
3
mA
58
0.19
V
22.22
m
Forward slope resistance
rt
Typical junction capacitance
CT
VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C
590
pF
Typical series inductance
LS
Measured lead to lead 5 mm from package body
5.0
nH
VALUES
UNITS
- 40 to 150
°C
3.0
°C/W
Note
(1) Pulse width < 300 μs, duty cycle < 2 %
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction and storage
temperature range
TJ (1), TStg
Maximum thermal resistance,
junction to case
RthJC
TEST CONDITIONS
DC operation
See fig. 4
Approximate weight
Marking device
Case style D-PAK (similar to TO-252AA)
0.3
g
0.01
oz.
50WQ03FN
Note
(1)
dP tot
1
------------- < -------------- thermal runaway condition for a diode on its own heatsink
dT J R thJA
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 94232
Revision: 14-Jan-11
VS-50WQ03FNPbF
100
Vishay Semiconductors
1000
IR - Reverse Current (mA)
IF - Instantaneous Forward Current (A)
Schottky Rectifier, 5.5 A
10
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
TJ = 150 °C
100
TJ = 125 °C
10
TJ = 100 °C
1.0
TJ = 75 °C
0.1
TJ = 50 °C
0.01
TJ = 25 °C
0.001
1
0
0.2
0.4
0.6
0.8 1.0
1.2
1.4
1.6
0
1.8
5
10
15
20
25
30
VFM - Forward Voltage Drop (V)
VR - Reverse Voltage (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage
CT - Junction Capacitance (pF)
1000
TJ = 25 °C
100
0
5
10
15
20
25
30
35
VR - Reverse Voltage (V)
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
10
1
PDM
t1
0.1
Single pulse
(thermal resistance)
0.01
0.00001
0.0001
t2
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
0.001
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
0.01
0.1
1
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Document Number: 94232
Revision: 14-Jan-11
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
VS-50WQ03FNPbF
Schottky Rectifier, 5.5 A
150
3.5
145
3.0
DC
Average Power Loss (W)
Allowable Case Temperature (°C)
Vishay Semiconductors
140
135
Square wave (D = 0.50)
80 % rated VR applied
130
125
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
2.5
2.0
RMS limit
1.5
DC
1.0
0.5
See note (1)
120
0
0
1
2
3
4
5
6
7
8
0
1
2
3
4
5
6
7
8
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current
Fig. 6 - Forward Power Loss Characteristics
IFSM - Non-Repetitive Surge Current (A)
IF(AV) - Average Forward Current (A)
1000
At any rated load condition
and with rated VRRM applied
following surge
100
10
100
1000
10 000
tp - Square Wave Pulse Duration (µs)
Fig. 7 - Maximum Non-Repetitive Surge Current
Note
(1) Formula used: T = T - (Pd + Pd
C
J
REV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
www.vishay.com
4
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 94232
Revision: 14-Jan-11
VS-50WQ03FNPbF
Schottky Rectifier, 5.5 A
Vishay Semiconductors
ORDERING INFORMATION TABLE
Device code
VS-
50
W
Q
03
FN
1
2
3
4
5
6
1
-
Vishay Semiconductors product
2
-
Current rating (5.5 A)
3
-
Package identifier:
TRL PbF
7
8
W = D-PAK
4
-
Schottky “Q” series
5
-
Voltage rating (03 = 30 V)
6
-
FN = TO-252AA (D-PAK)
7
-
None = Tube (50 pieces)
TR = Tape and reel
TRL = Tape and reel (left oriented)
TRR = Tape and reel (right oriented)
8
-
PbF = Lead (Pb)-free
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95016
Part marking information
www.vishay.com/doc?95059
Packaging information
www.vishay.com/doc?95033
SPICE model
www.vishay.com/doc?95408
Document Number: 94232
Revision: 14-Jan-11
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
5
Outline Dimensions
Vishay High Power Products
D-PAK (TO-252AA)
DIMENSIONS in millimeters and inches
(5)
A
E
b3
Pad layout
C
A
(3)
0.010 M C A B
c2
A
L3 (3)
Ø1
4
Ø2
4
B
Seating
plane
H
D (5)
1
2
0.245
MIN.
(6.23)
D1
L4
3
3
(2) L5
2
b
1
A
c
b2
0.06
MIN.
(1.524)
0.010 M C A B
2x e
0.093 (2.38)
0.085 (2.18)
(L1)
Detail “C”
Rotated 90 °CW
Scale: 20:1
H (7)
Lead tip
C
Gauge
plane
L2
MILLIMETERS
MIN.
0.488 (12.40)
0.409 (10.40)
0.089
MIN.
(2.28)
Detail “C”
SYMBOL
0.265
MIN.
(6.74)
E1
INCHES
MAX.
MIN.
MAX.
C Seating
plane
C
Ø
L
NOTES
A1
SYMBOL
MILLIMETERS
MIN.
MAX.
MAX.
A
2.18
2.39
0.086
0.094
e
A1
-
0.13
-
0.005
H
9.40
10.41
0.370
0.410
b
0.64
0.89
0.025
0.035
L
1.40
1.78
0.055
0.070
b2
0.76
1.14
0.030
0.045
L1
3
2.29 BSC
INCHES
MIN.
2.74 BSC
L2
0.51 BSC
NOTES
0.090 BSC
0.108 REF.
b3
4.95
5.46
0.195
0.215
c
0.46
0.61
0.018
0.024
L3
0.89
1.27
0.035
0.020 BSC
0.050
c2
0.46
0.89
0.018
0.035
L4
-
1.02
-
0.040
D
5.97
6.22
0.235
0.245
5
L5
1.14
1.52
0.045
0.060
D1
5.21
-
0.205
-
3
Ø
0°
10°
0°
10°
E
6.35
6.73
0.250
0.265
5
Ø1
0°
15°
0°
15°
E1
4.32
-
0.170
-
3
Ø2
25°
35°
25°
35°
3
2
Notes
(1)
Dimensioning and tolerancing as per ASME Y14.5M-1994
(2)
Lead dimension uncontrolled in L5
(3)
Dimension D1, E1, L3 and b3 establish a minimum mounting surface for thermal pad
(4)
Section C - C dimension apply to the flat section of the lead between 0.13 and 0.25 mm (0.005 and 0.10") from the lead tip
(5)
Dimension D, and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at
the outermost extremes of the plastic body
(6)
Dimension b1 and c1 applied to base metal only
(7)
Datum A and B to be determined at datum plane H
(8)
Outline conforms to JEDEC outline TO-252AA
Document Number: 95016
Revision: 04-Nov-08
For technical questions concerning discrete products, contact: [email protected]
For technical questions concerning module products, contact: [email protected]
www.vishay.com
1
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1