IRG4PC50F-E Data Sheet (324 KB, EN)

PD - 96168
IRG4PC50F-EPbF
Fast Speed IGBT
INSULATED GATE BIPOLAR TRANSISTOR
Features
C
• Optimized for medium operating
frequencies ( 1-5 kHz in hard switching, >20
kHz in resonant mode).
• Generation 4 IGBT design provides tighter
parameter distribution and higher efficiency than
Generation 3
• Industry standard TO-247AD package
• Lead-Free
VCES = 600V
VCE(on) typ. = 1.45V
G
@VGE = 15V, IC = 39A
E
n-channel
Benefits
• Generation 4 IGBT's offer highest efficiency available
• IGBT's optimized for specified application conditions
• Designed to be a "drop-in" replacement for equivalent
industry-standard Generation 3 IR IGBT's
TO-247AD
Absolute Maximum Ratings
VCES
IC @ TC = 25°C
IC @ TC = 100°C
ICM
ILM
VGE
EARV
PD @ TC = 25°C
PD @ TC = 100°C
TJ
TSTG
Parameter
Max.
Units
Collector-to-Emitter Breakdown Voltage
Continuous Collector Current
Continuous Collector Current
Pulsed Collector Current 
Clamped Inductive Load Current ‚
Gate-to-Emitter Voltage
Reverse Voltage Avalanche Energy ƒ
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction and
Storage Temperature Range
Soldering Temperature, for 10 seconds
Mounting torque, 6-32 or M3 screw.
600
70
39
280
280
± 20
20
200
78
-55 to + 150
V
A
V
mJ
W
300 (0.063 in. (1.6mm from case )
10 lbf•in (1.1N•m)
°C
Thermal Resistance
Parameter
RθJC
RθCS
RθJA
Wt
www.irf.com
Junction-to-Case
Case-to-Sink, Flat, Greased Surface
Junction-to-Ambient, typical socket mount
Weight
Typ.
Max.
–––
0.24
–––
6 (0.21)
0.64
–––
40
–––
Units
°C/W
g (oz)
1
08/06/08
IRG4PC50F-EPbF
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter
Min. Typ.
Collector-to-Emitter Breakdown Voltage
600 —
Emitter-to-Collector Breakdown Voltage „ 18
—
∆V(BR)CES/∆TJ Temperature Coeff. of Breakdown Voltage —
0.62
— 1.45
VCE(ON)
Collector-to-Emitter Saturation Voltage
— 1.79
— 1.53
VGE(th)
Gate Threshold Voltage
3.0
—
∆VGE(th)/∆TJ Temperature Coeff. of Threshold Voltage
—
-14
gfe
Forward Transconductance …
21
30
—
—
ICES
Zero Gate Voltage Collector Current
—
—
—
—
IGES
Gate-to-Emitter Leakage Current
—
—
V(BR)CES
V(BR)ECS
Max. Units
Conditions
—
V
VGE = 0V, IC = 250µA
—
V
VGE = 0V, IC = 1.0A
—
V/°C VGE = 0V, IC = 1.0mA
VGE = 15V
1.6
IC = 39A
—
IC = 70A
See Fig.2, 5
V
—
IC = 39A , TJ = 150°C
6.0
VCE = VGE, IC = 250µA
— mV/°C VCE = VGE, IC = 250µA
—
S
VCE = 100V, IC = 39A
250
VGE = 0V, VCE = 600V
µA
2.0
VGE = 0V, VCE = 10V, TJ = 25°C
2000
VGE = 0V, VCE = 600V, TJ = 150°C
±100 n A VGE = ±20V
Switching Characteristics @ TJ = 25°C (unless otherwise specified)
Qg
Qge
Qgc
td(on)
tr
td(off)
tf
Eon
Eoff
Ets
td(on)
tr
td(off)
tf
Ets
LE
Cies
Coes
Cres
Parameter
Total Gate Charge (turn-on)
Gate - Emitter Charge (turn-on)
Gate - Collector Charge (turn-on)
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Turn-On Switching Loss
Turn-Off Switching Loss
Total Switching Loss
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Switching Loss
Internal Emitter Inductance
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Min.
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Typ.
190
28
65
31
25
240
130
0.37
2.1
2.47
28
24
390
230
5.0
13
4100
250
49
Max. Units
Conditions
290
IC = 39A
42
nC
VCC = 400V
See Fig. 8
97
VGE = 15V
—
—
TJ = 25°C
ns
350
IC = 39A, VCC = 480V
190
VGE = 15V, RG = 5.0Ω
—
Energy losses include "tail"
—
mJ
See Fig. 10, 11, 13, 14
3.0
—
TJ = 150°C,
—
IC = 39A, VCC = 480V
ns
—
VGE = 15V, RG = 5.0Ω
—
Energy losses include "tail"
—
mJ
See Fig. 13, 14
—
nH
Measured 5mm from package
—
VGE = 0V
—
pF
VCC = 30V
See Fig. 7
—
ƒ = 1.0MHz
Notes:
 Repetitive rating; VGE = 20V, pulse width limited by
max. junction temperature. ( See fig. 13b )
‚ VCC = 80%(VCES), VGE = 20V, L = 10µH, RG = 5.0Ω,
(See fig. 13a)
„ Pulse width ≤ 80µs; duty factor ≤ 0.1%.
… Pulse width 5.0µs, single shot.
ƒ Repetitive rating; pulse width limited by maximum
junction temperature.
2
www.irf.com
IRG4PC50F-EPbF
100
For both:
80
Load Current (A)
Triangular wave:
Duty cycle: 50%
TJ = 125°C
Tsink = 90°C
Gate drive as specified
Power Dissipation = 40W
Clamp voltage:
80% of rated
60
Square wave:
60% of rated
voltage
40
20
Ideal diodes
A
0
0.1
1
10
100
f, Frequency (kHz)
Fig. 1 - Typical Load Current vs. Frequency
(For square wave, I=IRMS of fundamental; for triangular wave, I=IPK)
1000
100
TJ = 150°C
10
TJ = 25°C
VGE = 15V
20µs PULSE WIDTHA
1
0.1
1
10
VCE , Collector-to-Emitter Voltage (V)
Fig. 2 - Typical Output Characteristics
www.irf.com
IC , Collector-to-Emitter Current (A)
IC , Collector-to-Emitter Current (A)
1000
100
TJ = 150°C
TJ = 25°C
10
VCC = 50V
5µs PULSE WIDTH A
1
5
6
7
8
9
10
11
12
VGE , Gate-to-Emitter Voltage (V)
Fig. 3 - Typical Transfer Characteristics
3
IRG4PC50F-EPbF
VGE = 15V
60
50
40
30
20
10
2.5
VCE , Collector-to-Emitter Voltage (V)
Maximum DC Collector Current (A)
70
0
25
50
75
100
125
V GE = 15V
80µs PULSE WIDTH
I C = 78A
2.0
IC = 39A
1.5
I C = 20A
A
1.0
150
-60
TC , Case Temperature (°C)
-40
-20
0
20
40
60
80
100 120 140 160
TJ , Junction Temperature (°C)
Fig. 4 - Maximum Collector Current vs. Case
Temperature
Fig. 5 - Collector-to-Emitter Voltage vs.
Junction Temperature
Thermal Response (Z thJC )
1
D = 0.50
0.20
0.1
0.10
PDM
0.05
0.02
SINGLE PULSE
(THERMAL RESPONSE)
0.01
0.01
0.00001
t
1
t2
Notes:
1. Duty factor D = t / t
1 2
2. Peak TJ = PDM x Z thJC + TC
0.0001
0.001
0.01
0.1
1
10
t 1 , Rectangular Pulse Duration (sec)
Fig. 6 - Maximum Effective Transient Thermal Impedance, Junction-to-Case
4
www.irf.com
IRG4PC50F-EPbF
VGE = 0V
f = 1 MHz
Cies = Cge + Cgc + Cce
20
SHORTED
VGE , Gate-to-Emitter Voltage (V)
8000
C, Capacitance (pF)
Cres = Cce
Coes = Cce + Cgc
6000
Cies
4000
Coes
2000
Cres
A
0
1
10
VCE = 400V
I C = 39A
16
12
8
4
A
0
100
0
40
VCE, Collector-to-Emitter Voltage (V)
Total Switching Losses (mJ)
3.6
100
= 480V
= 15V
= 25°C
= 39A
3.4
3.2
3.0
2.8
2.6
A
2.4
0
10
20
30
40
R G , Gate Resistance
50
( Ω)
Fig. 9 - Typical Switching Losses vs. Gate
Resistance
www.irf.com
160
200
Fig. 8 - Typical Gate Charge vs.
Gate-to-Emitter Voltage
Total Switching Losses (mJ)
VCC
VGE
TJ
IC
120
Qg , Total Gate Charge (nC)
Fig. 7 - Typical Capacitance vs.
Collector-to-Emitter Voltage
3.8
80
60
RG = 5.0 Ω
VGE = 15V
VCC = 480V
10
IC = 78A
IC = 39A
IC = 20A
1
A
0.1
-60
-40
-20
0
20
40
60
80
100 120 140 160
TJ , Junction Temperature (°C)
Fig. 10 - Typical Switching Losses vs.
Junction Temperature
5
IRG4PC50F-EPbF
RG
TJ
VCC
VGE
10
1000
= 5.0 Ω
= 150°C
= 480V
= 15V
I C , Collector-to-Emitter Current (A)
Total Switching Losses (mJ)
12
8
6
4
2
A
0
0
20
40
60
I C , Collector-to-Emitter Current (A)
Fig. 11 - Typical Switching Losses vs.
Collector-to-Emitter Current
6
80
VGE
= 20V
GE
TJ = 125°C
SAFE OPERATING AREA
100
10
1
1
10
100
1000
VCE , Collector-to-Emitter Voltage (V)
Fig. 12 - Turn-Off SOA
www.irf.com
IRG4PC50F-EPbF
L
D.U.T.
VC *
50V
RL =
0 - 480V
1000V
c
480V
4 X IC@ 25°C
480µF
960V
d
* Driver same type as D.U.T.; Vc = 80% of Vce(max)
* Note: Due to the 50V power supply, pulse width and inductor
will increase to obtain rated Id.
Fig. 13b - Pulsed Collector
Fig. 13a - Clamped Inductive
Current Test Circuit
Load Test Circuit
IC
L
Driver*
D.U.T.
VC
Test Circuit
50V
1000V
c
Fig. 14a - Switching Loss
d
e
* Driver same type
as D.U.T., VC = 480V
c
d
90%
e
VC
10%
90%
Fig. 14b - Switching Loss
t d(off)
10%
I C 5%
Waveforms
tf
tr
t d(on)
t=5µs
E on
E off
E ts = (Eon +Eoff )
www.irf.com
7
IRG4PC50F-EPbF
TO-247AD Package Outline
Dimensions are shown in millimeters (inches)
TO-247AD Part Marking Information
(;$03/( 7+,6,6$1,5*3%.'(
:,7+$66(0%/<
/27&2'(
$66(0%/('21::
,17+($66(0%/</,1(+
1RWH3LQDVVHPEO\OLQHSRVLWLRQ
LQGLFDWHV/HDG)UHH
,17(51$7,21$/
5(&7,),(5
/2*2
3$57180%(5
+
$66(0%/<
/27&2'(
'$7(&2'(
<($5 :((.
/,1(+
TO-247AD package is not recommended for Surface Mount Application.
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
Data and specifications subject to change without notice.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.
Data and specifications subject to change without notice.08/2008
8
www.irf.com