8 7 6 5 4 2 3 This document, including the design, configuration and mechanical features revealed herein are the sole, confidential and proprietary property of TRU Corporation. Reproduction or use thereof, in whole or part, is prohibited without the prior written consent of TRU Corporation. 1 REV. DESCRIPTION DATE APPROVED - ORIGINAL ISSUE 1/2/08 RMK A ECO-3532 1/30/08 RMK D D 5.86 REF C C 3.50 REF 3.9 REF ENGINEERING DATA: ELECTRICAL : Impedance: 50 Ohms, nominal B MECHANICAL : Interfaces : HPC(m) per TRU standard (proprietary interface) B EIA-1625-50 per EIA-RS-225 and MIL-DTL-24044 with Swivel Flange and Removable Bullet NOTES: Weight : 3.57 pounds MATERIALS : Sping Contacts : Beryllium Copper C17300, TD04 per ASTM-B196 Center Conductors : Brass C36000, H02 per ASTM-B16 Other Metal Parts : Brass C36000, H02 per ASTM-B16 and/or Aluminum 6061-T6 per ASTM-B211 Coupling Housing : Fiberglass reinforced Polypropylene Couplig Cam Levers : Stainless Steel Insulators : PTFE (Teflon) per ASTM-D1710, l1A Gaskets : Silicone Rubber per A-A-59588A, Class 2A, Grade 50 1. Unlesss otherwise specified, dimensions are reference only. 2. The mounting hardware, EIA-1625 center connector (bullet), and flange O-ring are not included as part of this adapter. MATERIAL DO NOT SCALE DRAWING UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES A SEE ABOVE FINISHES: Sping Contacts : Gold plated Center Conductors : Silver plated Other Brass Parts : Nickel plated Aluminum Parts : Anodized TOLERANCES: FRACTIONS: 1/64 .XX : .01 .XXX: .005 ANGLES: 1/2` MACHINED SURFACES: COMMENTS: DRAWN RMK 12/6/07 ENG APPR. KOCH MFG APPR. ------ 7 OTHER APPR. 5 1/2/08 DATE TITLE: DATE 12/20/07 AM THIRD ANGLE PROJECTION 63 6 DATE ------ SIZE B A CONNECTOR, COAXIAL, RF HPC(m) to EIA-1625(f) ADAPTER DWG. NO. CAGE CODE: 92180 weight: 3.675 lbs 8 DATE 4 3 2 REV TRU-10740 A SHEET 1 OF 1 SCALE: 1:1 1