Preset counters electromechanic 1 preset, adding Display 5-digits, manual reset button FE304, FE314, FE324 Features –– Preset counter with one preset –– Adding –– Display 5-digits –– With reset button FE304 - socket box 24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 % Residual ripple <48 % Nominal frequency 50 / 60 Hz Pulse ratio 1:1 Service life 100 million impulses Preset 1 preset Output contact Change-over contact by micro-switch, one-pole Switching capacity 100 VA / 30 W Limit switch lifetime 1 million switching cycles Spark extinguisher Recommended for inductive load Standard DIN EN 61010‑1 Protection class II Overvoltage category II Pollution degree 2 Emitted interference DIN EN 61000-6-4 Interference immunity DIN EN 61000-6-2 FE324 - front panel with spring clip mount 1 www.baumer.com/motion 14/5/2014 FE314 - front panel with screw mount Voltage supply Subject to modification in technic and design. Errors and omissions excepted. Technical data - electrical ratings Preset counters electromechanic 1 preset, adding Display 5-digits, manual reset button FE304, FE314, FE324 Technical data - mechanical design Display White numbers on black Number of digits 5-digits Digit height 4.5 mm (postion value) 3.5 mm (preset) Count mode 1 impulse = 1 count Step-by-step switching Adding in 2 half steps Measuring range 99 999 Zero setting Manual by reset button Ambient temperature 0...+45 °C Storage temperature -20...+70 °C Relative humidity 80 % non-condensing Protection DIN EN 60529 IP 41 Connection Soldering pins (flat) Weight approx. 150 g Material Housing: Noryl PPO, black Connection diagram 3 4 + (-) (+) Voltage 21 20 22 End contact Trigger level Max. counting speed 10 pulses/s Voltage 24/110VAC±10% 230VAC+6/-10% Power 2.4VA Min.pulseduration50ms Min.pulseinterval50ms Switchontime(at25°C)100% FE304 Housing type Socket box Mounting Socket box Dimensions W x H x L 50 x 50 x 85.9 mm Cutout dimensions 50 x 50 mm Mounting depth 85.9 mm Max. counting speed 20 pulses/s Voltage 24VDC±10% Power 2.2W Min.pulseduration25ms Min.pulseinterval25ms FE314 Switchontime(at25°C)100% Mounting Front panel with 2 screws Dimensions W x H x L 60 x 75 x 61 mm Cutout dimensions 51 x 51 mm Mounting depth 77.5 mm Accessories Front panels for FE304 Z 100.02A FE324 Housing type Built-in housing Mounting Front panel with spring clips Dimensions W x H x L 53.2 x 53.2 x 61 mm Cutout dimensions 51 x 51 mm Mounting depth 77.5 mm Front panel with transparent protective cover, for socket box 50 x 50 mm Front frames for FE304 2 Z 102.01A Front frame with knob lock provided on transparent cover Z 102.02A Front frame with cylinder lock provided on transparent cover Z 107.02A Front frame, insertion cutout 50 x 50 mm www.baumer.com/motion Subject to modification in technic and design. Errors and omissions excepted. Built-in housing 14/5/2014 Housing type Preset counters electromechanic 1 preset, adding Display 5-digits, manual reset button FE304, FE314, FE324 Part number Socket box Front panel with screw mount FE304. 550A B FE314. 550A B Display B 5-digits 99999 A3 A5 A8 A9 Display B 5-digits 99999 Voltage 24 VDC 24 VAC 110 VAC 230 VAC A3 A5 A8 A9 Zero setting 550A With reset button Voltage 24 VDC 24 VAC 110 VAC 230 VAC Zero setting 550A With reset button Front panel with spring clips mount FE324. 550A B Display B 5-digits 99999 A3 A5 A8 A9 Voltage 24 VDC 24 VAC 110 VAC 230 VAC 3 www.baumer.com/motion 14/5/2014 Subject to modification in technic and design. Errors and omissions excepted. Zero setting 550A With reset button Preset counters electromechanic 1 preset, adding Display 5-digits, manual reset button FE304, FE314, FE324 Dimensions FE304 - socket box FE314 - front panel with 2 screws 8 30 8 75 63 50 50 6 12.5 50 18.5 67.4 10 5 50 60 16.5 61 3 10 FE324 - front panel with spring clip mount 6 16.5 61 3 10 Subject to modification in technic and design. Errors and omissions excepted. 50 53.2 4 www.baumer.com/motion 14/5/2014 1.6 50 53.2 1.6 8