µClamp2417P 24V µClamp® 7-Line, Surge & ESD Protection PROTECTION PRODUCTS - µClamp® Description Features µClamp® TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They feature large cross-sectional area junctions for conducting high transient currents. This device offers desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The µClamp®2417P is in an 8-pin SGP2626N8 package measuring 2.6 x 2.6mm with a nominal height of 0.60mm. Leads are finished with lead-free NiPdAu. Each device will protect seven lines operating at +/- 24 volts. This device gives the designer flexibility to replace multiple single line devices in space constrained applications. µClamp2417P features high surge capability and may also be used to meet the ESD immunity requirements of IEC 61000-4-2. These devices are ideal for use in applications such as LCD Televisions, monitors, and industrial equipment. High ESD withstand Voltage: +/-17kV (Contact) per IEC 61000-4-2 High Surge Capability: 10A (tp = 8/20us) Protects up to seven VBus lines Small Package Working voltage: 24V Low reverse current: <1nA typical (VR=24V) Dynamic resistance: 0.55 Ohms (Typ) Solid-state silicon-avalanche technology Mechanical Characteristics SGP2626N8 8-pin package (2.6 x 2.6 x 0.60mm) Lead Pitch: 0.60mm Pb-Free, Halogen Free, RoHS/WEEE Compliant Molding compound flammability rating: UL 94V-0 Lead Finish: NiPdAu Marking: Marking code + Date Code Packaging: Tape and Reel Applications Package Dimensions Circuit Diagram 2.60 1 VBus Protection LCD Televisions OLED Panels Chip-on-Glass Driver IC data line Set Top Box Industrial Equipment 2 Pin 8 Pin 7 Pin 6 Pin 5 Pin 1 Pin 2 Pin 3 Pin 4 2.60 0.60 BSC 0.60 Nominal Dimensions in mm 1/22/2015 7-Line, Bidirectional 1 www.semtech.com µClamp2417P PROTECTION PRODUCTS Absolute Maximum Ratings Rating Symbol Value Units Peak Pulse Power (tp = 8/20µs) PPK 750 W Peak Pulse Current (tp = 8/20µs) IPP 10 A VESD ±25 ±17 kV TJ -55 to +125 O TSTG -55 to +150 O ESD per IEC 61000-4-2 (Air) ESD per IEC 61000-4-2 (Contact)(1) (1) Operating Temperature Storage Temperature C C Electrical Characteristics (T=25OC unless otherwise specified) Parameter Reverse Stand-Off Voltage Symbol Conditions Min. Typ. Max. Units 24 V 32 36 V <1 100 nA 75 V VRWM VBR IBR = 1mA Between any two pins Reverse Leakage Current IR VRWM = 24V, T=25oC Between any two pins Clamping Voltage VC IPP = 10A, tp = 8/20µs ESD Clamping Voltage2 VC IPP = 4A tp = 0.2/100ns 36 V ESD Clamping Voltage2 VC IPP = 16A tp = 0.2/100ns 43 V Dynamic Resistance2, 3 RDYN tp = 100ns Any pin to pin 8 0.55 Ohms Junction Capacitance CJ Reverse breakdown Voltage Any pin to pin 8 f = 1MHz VR = 0V 27 38 50 pF Notes 1)Measured with a 40dB attenuator, 50 Ohm scope input impedance, 2GHz bandwidth. ESD gun return path connected to ESD ground plane. 2)Transmission Line Pulse Test (TLP) Settings: tp = 100ns, tr = 0.2ns, ITLP and V TLP averaging window: t1 = 70ns to t2 = 90ns. 3) Dynamic resistance calculated from ITLP = 4A to ITLP = 16A 2015 Semtech Corporation. 2 www.semtech.com µClamp2417P PROTECTION PRODUCTS Typical Characteristics Non-Repetitive Peak Pulse Power vs. Pulse Time TA = 25OC 60 50 10 Peak Clamping Voltage - VC (V) Peak Pulse Power - PPP (kW) Clamping Voltage vs. Peak Pulse Current 70 100 1 0.1 0.1 1 10 100 40 30 20 10 0 1000 Pulse Duration - tp (µs) TA = 25OC Waveform: tp= 8x20us 0 2 4 6 8 Peak Pulse Current - IPP (A) Junction Capacitance vs. Reverse Voltage 40 Transmission Line Pulse Test (TLP) Settings: tp = 100ns, tr = 0.2ns, ITLP and VTLP averaging window: t1 = 70ns to t2 = 90ns 25 35 20 30 IDUT (A) Capacitance - CJ (pF) 25 20 15 10 15 10 5 5 UC2417P_AR_CJvV 0 5 10 15 20 Reverse Voltage - VR (V) 25 0 30 ESD Clamping (8kV Contact per IEC 61000-4-2) 20 30 VDUT (V) 40 50 60 UC2417P_AR_ESDN8 -20 Clamping Voltage - VC (V) Clamping Voltage - VC (V) 120 10 0 Measured with 50 Ohm scope input impedance, 2GHz bandwidth. Corrected for 50 Ohm, 40dB attenuator. ESD gun return path connected to ESD ground plane. 140 UC2417P_AR_TLPP 0 ESD Clamping (-8kV Contact per IEC 61000-4-2) 160 100 80 60 -40 -60 -80 -100 40 Measured with 50 Ohm scope input impedance, 2GHz bandwidth. Corrected for 50 Ohm, 40dB attenuator. ESD gun return path connected to ESD ground plane. -120 20 -140 0 UC2417P_AR_ESDP8 -20 12 TLP Characteristic 30 45 0 10 -10 10 2015 Semtech Corporation. 30 Time (ns) 50 -160 70 3 -10 10 30 Time (ns) 50 70 www.semtech.com µClamp2417P PROTECTION PRODUCTS Applications Information Device Connection Options uClamp2471P is designed to protect up to seven lines operating at 24V. One pin of the eight pin device is connected to ground for bi-directional operation. The device is designed to utilize pin 8 for the ground connection. The TVS diode on this pin has a larger junction area compared to the other pins. While it is not necessary to utilize pin 8 as the ground connection, doing so optimizes the device protection performance. Pin 8 Pin 7 Pin 6 Pin 5 Pin 1 Pin 2 Pin 3 Pin 4 Schematic and Pin Configuration 2015 Semtech Corporation. 4 www.semtech.com µClamp2417P PROTECTION PRODUCTS Outline Drawing - SGP2626N8 A D B DIMENSIONS MILLIMETERS DIM MIN NOM MAX A A1 b D E e L N aaa bbb E PIN 1 INDICATOR (LASER MARK) A 0.55 0.60 0.65 0.00 0.015 0.05 0.20 0.25 0.30 2.55 2.60 2.675 2.55 2.60 2.675 0.60 BSC 0.45 0.50 0.55 8 0.08 0.10 SEATING PLANE aaa C C A1 D/2 2 1 LxN (0.025-0.075) E/2 R 0.100 Pin 1 N bxN bbb e e/2 NOTES: C A B 1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). Land Pattern - SGP2626N8 DIMENSIONS (C) Z G DIM C G P X Y Z MILLIMETERS (2.30) 1.45 0.60 0.30 0.85 3.15 Y X P/2 P NOTES: 1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). 2. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY. CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR COMPANY'S MANUFACTURING GUIDELINES ARE MET. 2015 Semtech Corporation. 5 www.semtech.com µClamp2417P PROTECTION PRODUCTS Marking Ordering Information PIN 1 INDICATOR (LASER MARK) YYWW Part Number Qty per Reel Reel Size µClamp2417P.TCT 3000 7” Notes: 1) Lead finish is lead-free NiPdAu. 2) MicroClamp, uClamp and µClamp are trademarks of Semtech Corporation. Notes: YYWW = Date Code Tape and Reel Specification 2417 YYWW 2417 YYWW 2417 YYWW Pin 1 Location (Towards Sprocket Holes) Contact Information Semtech Corporation Protection Products Division 200 Flynn Rd., Camarillo, CA 93012 Phone: (805)498-2111 FAX (805)498-3804 2015 Semtech Corporation. 6 www.semtech.com