6020-1000-030

6020 SERIES
2 In. Dia. Servo Mount
PRECISION POSITION
SENSORS
STANDARD PRODUCT OFFERING
MS PART NUMBER
RESISTANCE
6020-1000-030
6020-1002-030
6020-1003-030
1KΩ ±10%
5KΩ ±10%
10KΩ ±10%
15°
1
.072 .005
.093 .005
.062 .005
3
2
.290
.010
.2498
.2494
15°
1.195
MAX.
2.000
.005
1.8750
1.8740
1.875
MAX.
.625
.032
STANDARD MODEL
ELECTRICAL CHARACTERISTICS
RESISTANCE:
ACTIVE ELECTRICAL ANGLE:
ELECTRICAL CONTINUITY ANGLE:
INDEPENDENT LINEARITY:
END VOLTAGE:
VOLTAGE RESOLUTION:
OUTPUT SMOOTHNESS:
RESISTANCE TEMP. COEFFICIENT:
POWER RATING @ 70°C:
WIPER CONTACT CURRENT:
DIELECTRIC STRENGTH:
INSULATION RESISTANCE:
1kΩ to 10kΩ ±10%
350°
354° MIN.
±0.5%
0.5% MAX.
VIRTUALLY INFINITE
0.1% MAX.
400PPM/°C MAX.
3.0 WATTS MAX.
10 MilliAmps MAX.
1000 VRMS @ 60Hz
100 MegΩ MIN. @ 500VDC
.750
MAX.
STANDARD
ENVIRONMENTAL CHARACTERISTICS
OPERATING TEMP. RANGE:
ROTATIONAL OPERATING LIFE:
SCHEMATIC DIAGRAM
2
STANDARD MODEL
MECHANICAL CHARACTERISTICS
MECHANICAL ROTATION:
STARTING TORQUE:
RUNNING TORQUE:
TOTAL WEIGHT (1-GANG):
PILOT RUNOUT:
SHAFT RUNOUT:
SHAFT END PLAY:
SHAFT RADIAL PLAY:
LATERAL RUNOUT:
-65°C To +125°C
100 x 10 6 REVOLUTIONS MIN.
CW
CONTINUOUS
0.50 Oz.-In. MAX.
0.40 Oz.-In. MAX.
3.5 Oz. MAX.
0.001 In. TIR
0.001 In. TIR
0.003 MAX.
0.001 In. TIR
0.002 In. TIR
3
1
VIEWED FROM SHAFT END
ALL OTHER GENERAL REQUIREMENTS IN
ACCORDANCE WITH MIL-PRF-39023
STANDARD
MATERIALS OF CONSTRUCTION
HOUSING AND COVER:
SHAFT AND BALL BEARINGS:
RESISTANCE ELEMENT:
ELECTRICAL CONTACTS:
SOLDER TERMINALS:
ANODIZED ALUMINUM
STAINLESS STEEL
CO-MOLDED CONDUCTIVE PLASTIC
MULTI-FINGER PRECIOUS METAL
GOLD PLATED BRASS
Position Sensor Products
precisionsensors.meas-spec.com
424 Crown Point Circle, Grass Valley, CA 95945
Ph: 530.273.4608 Fax: 530.273.0769
8-7-13
www.meas-spec.com
6020 SERIES
ANODIZED
ALUMINUM
HOUSING
2 In. Dia. Servo Mount
PRECISION POSITION
SENSORS
STAINLESS STEEL
PRECISION SHAFT
TURRET-STYLE
SOLDER TERMINAL
SHAFT
INSULATOR
STAINLESS STEEL
PRECISION
BALL BEARINGS
CO-MOLDED
RESISTANCE ELEMENT
STANDARD
ELECTRICAL CHARACTERISTICS
RESISTANCES (±10%):
ACTIVE ELECTRICAL ANGLE:
ELECTRICAL CONTINUITY ANGLE:
INDEPENDENT LINEARITY:
END VOLTAGE:
VOLTAGE RESOLUTION:
OUTPUT SMOOTHNESS:
RESISTANCE TEMP. COEFFICIENT:
POWER RATING @ 70°C:
WIPER CONTACT CURRENT:
DIELECTRIC STRENGTH:
INSULATION RESISTANCE:
1KΩ, 5KΩ, and 10kΩ
350°
352° MIN.
±0.5%
0.5% MAX.
VIRTUALLY INFINITE
0.1% MAX.
400PPM/°C MAX.
3.0 WATTS MAX.
10 MilliAmps MAX.
1000 VRMS @ 60Hz
100 MegΩ MIN. @ 500VDC
STANDARD
MECHANICAL CHARACTERISTICS
MECHANICAL ROTATION:
STARTING TORQUE:
RUNNING TORQUE:
TOTAL WEIGHT (1-GANG):
PILOT RUNOUT:
SHAFT RUNOUT:
SHAFT END PLAY:
SHAFT RADIAL PLAY:
LATERAL RUNOUT:
HOUSING AND COVER:
SHAFT AND BALL BEARINGS:
RESISTANCE ELEMENT:
ELECTRICAL CONTACTS:
SOLDER TERMINALS:
ADDITIONAL TAPS, CURRENT OR VOLTAGE
CURRENT LIMIT RESISTORS AND OTHER INTERNAL
CIRCUIT COMPONENTS (CAPS, DIODES, ETC.)
MULTI-GANG CONSTRUCTION (UP TO 6) ON A
COMMON SHAFT OR CONCENTRIC SHAFTING
(ADD .320 LENGTH PER GANG).
ANODIZED ALUMINUM
STAINLESS STEEL
CO-MOLDED CONDUCTIVE PLASTIC
MULTI-FINGER PRECIOUS METAL
GOLD PLATED BRASS
Position Sensor Products
precisionsensors.meas-spec.com
SPECIAL LINEARITIES AS LOW AS 0.05%, ABSOLUTE
(INDEXED) OR INDEPENDENT OVER SPECIFIED
REGIONS.
SPECIAL TRANSFER FUNCTIONS:
NON-LINEAR OUTPUTS
LOAD COMPENSATION
TRIG, LOG, AND EXPONENTIAL OUTPUTS
-65°C To +125°C
100 x 10 6 REVOLUTIONS MIN.
ALL OTHER GENERAL REQUIREMENTS
IN ACCORDANCE WITH MIL-PRF-39023
AVAILABLE OPTIONS
CUSTOM RESISTANCE VALUES (500Ω TO 100kΩ)
AND TOLERANCES AS LOW AS ±5%
WIRE LEADS OR CABLE IN PLACE OF TERMINALS
CONTINUOUS
0.50 Oz.-In. MAX.
0.40 Oz.-In. MAX.
2.0 Oz. MAX.
0.001 In. TIR
0.001 In. TIR
0.003 MAX.
0.001 In. TIR
0.002 In. TIR
STANDARD
MATERIALS OF CONSTRUCTION
ANODIZED
ALUMINUM
COVER
SPECIAL ELECTRICAL ANGLES UP TO 356° MAX.
STANDARD
ENVIRONMENTAL CHARACTERISTICS
OPERATING TEMP. RANGE:
ROTATIONAL OPERATING LIFE:
WELDED MULTI-FINGER
PRECIOUS METAL CONTACTS
SPECIAL SHAFT LENGTHS AND FEATURES SUCH AS
REAR EXTENSIONS, FLATS, SLOTS, AND STEPS.
SPECIAL TORQUE OR DETENT REQUIREMENTS
SPECIAL MOUNTING DIMENSIONS OR FEATURES
INCLUDING ANTI-ROTATION PINS, BOLT FLANGES,
AND THREADED HOLES.
ROTATIONAL STOPS LIMITING SHAFT TRAVEL.
ANCILLIARY DEVICES SUCH AS SPRING RETURNS,
CLUTCHES, BRAKES, AND SWITCHES.
SPECIAL ENVIRONMENTAL CAPABILITES SUCH AS
MOISTURE SEALS, HIGH SHOCK AND VIBRATION.
424 Crown Point Circle, Grass Valley, CA 95945
Ph: 530.273.4608 Fax: 530.273.0769
8-7-13
www.meas-spec.com