Switches Safety and Disconnect Switches Contents Pages Heavy Duty Enclosed Safety Switches Features and Benefits. . . . . . . . . . . . . . . . . . . . . . . . . . 18/2 240V Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18/3 600V Selection . . . . . . . . . . . . . . . . . . . . . . . . . . 18/4 - 18/5 Switches with Viewing Window. . . . . . . . . . . . . . . . . . 18/6 4-Pole and 6-Pole Switches. . . . . . . . . . . . . . . . . . . . . . 18/7 Interlocked Receptacle Switches . . . . . . . . . . . . . . . . . 18/8 Type VBII Non-Metallic & 316 Grade Stainless Steel. . 18/9 Enclosed Solar Photovoltaic (PV) Switches. . . . . . . . . 18/10 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . 18/11 - 18/13 Rotary Disconnect Switches in Non-Metallic Enclosures . . . . . . . . . . . . . . 18/14 - 18/15 Contents Pages Open Disconnect Switches Compact Non-Fusible — Rotary and Toggle (LBR). . . . . . . . . . . . . . . . . . . . . Compact Non-Fusible — Rotary and Toggle (3LD) . . . . . . . . . . . . . . . 18/17 Type VBII (30-600A) with Flange Mounted Operating Handle. . . . . . . . . . . . . . . . . . . . . . . . . . Type VBII Switch, Handle and Linkage Kit Selection. . . . . . . . . . . . . . . . . . . . . . . Accessories Type VBII. . . . . . . . . . . . . . . . . . . 18/22 Type MCS (30-200A) — Switches, Fuse and No Fuse Kits . . . . . . . . . . . . . . . . . . . . . . . 18/25 Type CFS Compact Fusible Switches. . . . . . . 18/27 - 18/16 18/19 18/20 18/21 18/24 18/26 18/30 Heavy Duty Safety Switch Standards and Ratings Standards b UL98 approved per file #E4776 b Suitable for use as service entrance equipment (where applicable) b Meets NEMA standard KS-1-1990 for Type HD switches b Seismic qualification – all switches have been tested and comply with the 2007 California Building Code CBC (Zone 4) Ratings b b b b 30-1200A, 240V and 600V AC and DC 2, 3, 4 and 6 pole fusible and non-fusible All HD safety switches are both HP and load break rated Enclosures are available to meet NEMA 1, 3R, 12 & 4/4X requirements Safety Switch AIC Ratings When Protected by Fuses b 30-600A – 10,000 AIC with Class H fuses b 30-600A – 200,000 AIC with Class R, J or T fuses b 800 & 1200A – 200,000 AIC with Class L or T fuse Fuse Provisions supplied in fusible switches b 30 & 60A 240V – Class H standard, Class R with kit b 100-600A 240V – Class H standard, Class J by moving load base, Class R with kit 30-600A 600V - Class H standard, Class J by moving load b base, Class R with kit b 100 & 200A - Class T with kit b 400 & 600A - Class H standard, Class J & T by moving load base, Class R with kit 800A – Class L standard, Class T by moving load base b 1200A – Class L standard, Class T with kit (240V max) b Non- Fusible Safety Switch AIC Ratings When Protected by a Circuit Breaker Breaker Frame NEG, NGB, ED4 Non-Fused Switch 30 DT (240V) UL Listed Short Circuit Current Rating 18 kA Thru 240 VAC NEB, NEG, NGG, NGB, ED4 60-100A GD & DT (240V) 18 kA Thru 240 VAC NEB, NEG, NGG, NGB, ED4 30-100A HD & DT (600V) 18 kA Thru 480 VAC ED6 30-100A HD & DT (600V) 18 kA Thru 600 VAC FD6-A, JD6-A 200A HD & DT (600V) 18 KA Thru 600 VAC JD6-A, LD6-A 400A GD & DT (240V) 18 kA Thru 240 VAC JD6-A, LD6-A 400A HD & DT (600V) 18 kA Thru 600 VAC LD6-A 600A GD & DT (240V) 25kA Thru 240 VAC LD6-A 600A HD & DT (600V) 25kA Thru 600 VAC NNG 1200A HD & DT (600V) 25 kA Thru 600 VAC All switches above are rated at 10 KA when protected by any UL Listed CB Circuit breaker trip rating must not exceed switch ampere rating Siemens Industry, Inc. Industrial Controls Catalog 18/1 Switches Heavy Duty Safety Switches Features 15 3 20 2 11 17 16 9 4 1 5 18 6 13 19 8 14 12 1. Quick-make, quick-break operating mechanism that ensures positive operation. 7 2. Visible blade, double-break switching action. 12.Unique enclosure design increases rigidity and prevents cuts and scrapes to conductors and installer’s hands. 13.Spring reinforced fuse clips that assure reliable 3. Arc chutes dissipate heat and prolong switch life. contact for cool operation. 4. Highly visible red handle grip. Designed for hook stick operation. 14.Door latch securely holds door closed and allows cover padlocking. 5. Defeatable dual cover interlock. 15.Front removable mechanical lugs that are suitable for CU/AI 60 or 75° C conductors. 6. Center punch provided for field drilling to allow ON padlocking. 10 7. Handle can be padlocked in the OFF position with up to (3) padlocks with 5/16" hasps. 8. Generous top, bottom and side gutters that meet or exceed NEC wire-bending space requirements. 18/2 16.Lugs are field convertible to copper body and to a wide variety of compression connectors. 17.Hinged clear line terminal shield with probe holes for inspecting or testing line side terminals. 9. Informative door labeling which includes replacement parts list. 18.Embossed aluminum nameplate on Heavy Duty Switches provides highly visible ON/OFF indication. 10.Tangential knockouts through 600A for easy conduit lineup. 19.Drawn cover for increased rigidity and resistance to abuse. 11.Side-hinged door that opens past 180 degrees for easier wiring. 20.Top key hole and bottom mounting holes provide easy 2 or 3 point mounting. Siemens Industry, Inc. Industrial Controls Catalog Switches • Revised • 07/15/15 Heavy Duty Safety Switches Selection Horsepower Ratinga Indoor — Type 1 System Ampere Rating Catalog Number Outdoor — Type 3R Ship Wt. (lbs.) Std. Pkg Catalog Number Ship Wt. (lbs.) Std. Pkg 240V AC 1-Phase, 2-Wire 2-Phase, 4-Wire 3-Phase, 3-Wire 250 Volt DC Std. Std. Std. Std. Max. Max. Max. 240 Volt Fusible e 2-Pole, 2-Fuse, and Solid Neutral c 30 60 100 200 400 600 800 1200 3-Pole, 3-Fuse, and Solid Neutral 0030 0060 0100 0200 0400 0600 0800 1200 (Also used for 2-Pole, 2-Wire Applications) HF221N HF222N HF223N HF224N HF225NA HF226NA HF227N HF228N n 012 018 023 047 91.1 95.6 365 385 HF221NR HF222NR HF223NR HF224NR HF225NRA HF226NRA HF227NR HF228NR n 013 019 024 048 91.1 95.6 365 385 011⁄2 03 071⁄2 15 15 15 — — 03 10 15 — — — — — (Also used for 3-Pole, 3-Wire Applications) HF321N HF322N HF323N HF324N HF325NA HF326NA HF327N HF328N 014 019 025 049 94.6 99.6 375 395 HF321NR HF322NR HF323NR HF324NR HF325NRA HF326NRA HF327NR HF328NR 015 020 026 050 94.6 99.6 375 388 011⁄2 03 071⁄2 15 15 15 — — 03 10 15 — — — — — 240 Volt AC/250 Volt DC — — — — — — — — — — — — — — — — 003 0071⁄2 015 025 050 075 100 100 0071⁄2 015 030 060 125 200 250 250 05 10 20 40 50 50 50 50 240 Volt AC/250 Volt DC — — — — — — — — — — — — — — — — 003 0071⁄2 015 025 050 075 100 100 0071⁄2 015 030 060 125 200 250 250 05 10 20 40 50 50 50 50 240 Volt Fusiblee 2-Pole, 2-Fuse d Type 4/4X Stainless 0030 0060 0100 0200 3-Pole, 3-Fuse d 0030 0060 0100 0200 400 600 800 HF221S HF222S HF223S HF224S 013 019 024 048 HF221J HF222J HF223J HF224J 013 019 024 048 011⁄2 03 071⁄2 15 03 10 15 — — — — — — — — — 003 0071⁄2 015 025 0071⁄2 015 030 060 05 10 20 40 (Also used for 2-Pole, 2-Wire Applications in 400–800A Ratings) 240 Volt AC/250 Volt DC HF321S HF322S HF323S HF324S HF325SA HF326SA HF327S ■ n Built to order. Allow 3-5 weeks for delivery. H eight reduced switch (45.25 rather than 56 inches in height) for use with 500MCM or smaller conductors. Siemens Industry, Inc. Industrial Controls Catalog 240 Volt AC/250 Volt DC Type 12 Industrial f 014 020 025 049 93 98 370 HF321J HF322J HF323J HF324J HF325JA HF326JA HF327J■ 014 020 025 049 93 98 365 D ual horsepower ratings: Std.- applies when non-time delay fuses are installed. Max.- applies when timedelay fuses are installed. These switches are UL-listed for application on grounded B-phase systems and are suitable for 3-phase motor applications. Product Category: HDSS 011⁄2 3 071⁄2 15 15 15 — 3 10 15 — — — — — — — — — — — — — — — — — — 003 0071⁄2 015 025 50 75 100 0071⁄2 015 030 060 125 200 250 — 10 20 40 50 50 50 When a neutral is required use a field installed neutral kit. for use as service entrance equipment. Also rated Type 3S/3R. 304 grade stainless steel. For switches with enclosures constructed from 316 grade stainless steel, see page 18/9. Suitable 18/3 Switches • Revised • 07/15/15 Heavy Duty Safety Switches Selection Horsepower Rating Indoor — Type 1 System Ampere Rating Catalog Number 600 Volt Fusible 2-Pole, 2-Fuse c 0030 0060 0100 3-Pole, 3-Fuse 0030 0030 0060 0060 0100 0200 0400 0600 0800 1200 Ship Wt. (lbs.) Std. Pkg Catalog Number Ship Wt. (lbs.) Std. Pkg 480V AC 1-Phase, 2-Wire 3-Phase, 3-Wire 600V AC 1-Phase, 2-Wire 3-Phase, 3-Wire Std. Max. Std. Std. Std. 03 05 10 071⁄2 20 30 — — — 03 03 05 05 05 25 — — — — 071⁄2 071⁄2 20 20 20 50 — — — — 03 05 10 25 — — — — 071⁄2 20 30 50 — — — — Max. Max. Max. 250 600 Volt Volt DC DC e HF261 HF262 HF263 015 020 026 HF261R HF262R HF263R 015 020 027 HF361 HF361Lg HF362 — HF363 HF364 HF365A HF366A HF367 HF368 14 19 19 — 24 48 93 98 365 383 HF361R HF361RLg HF362R HF362RL HF363R HF364R HF365RA HF366RA HF367R HF368R 015 020 020 025 025 049 157 161 365 385 014 019 025 049 94.6 99.6 375 395 HF361NR HF362NR HF363NR HF364NR HF365NRA HF366NRA HF367NR HF368NR 015 020 026 050 94.6 99.6 375 388 3-Pole, 3-Fuse and Solid Neutral 0030 0060 0100 0200 0400 0600 0800 1200 Outdoor — Type 3R HF361N HF362N HF363N HF364N HF365NA HF366NA HF367N HF368N 480 Volt AC/600 Volt AC/600 Volt DC — — — 03 10 15 10 25 40 — — — — — — 05 10 20 15 30 50 480 Volt AC/600 Volt AC/250 Volt DC a 005 005 015 015 025 050 100 150 200 200 015 015 030 030 060 125 250 400 500 500 03 03 10 10 15 30 — — — — 10 10 25 25 40 50 — — — — 0071⁄2 0071⁄2 015 015 030 060 125 200 250 250 020 020 050 050 075 150 350 500 500 500 05 05 10 10 20 40 50 50 50 50 — — 30 30 50 50 — — — — 480 Volt AC/600 Volt AC/250 Volt DC a 005 015 025 050 100 150 250 250 015 030 060 125 250 400 500 500 03 10 15 30 — — — — 10 25 40 50 — — — — 0071⁄2 015 030 060 125 200 250 250 020 050 075 150 350 500 500 500 05 10 20 40 50 50 50 50 — 30 50 50 — — — — 600 Volt Fusible e (For 2-Pole Applications use outside poles of 3-Pole Switches) 2-Pole, 2-Fuse c 0030 0060 0100 Type 4/4X Stainless 015 HF261S 020 HF262S 027 HF263Sn Type 12 Industrial f HF261J■ HF262Jn HF263Jn 015 020 027 3-Pole, 3-Fuse 0030 0060 0100 0200 0400 0600 0800 1200 03 05 10 071⁄2 20 30 HF361S HF362S HF363S HF364S HF365SA HF366SA HF367S HF368Sn 013 020 025 049 93 98 370 388 n Built to order. Allow 3-5 weeks for delivery. a 60-600A 3-Pole switches are also rated 600V DC. b Height reduced switch (45.25 rather than 56 inches in height) for use with 500MCM or smaller conductors. c Use 3-Pole switch for 200A applications. d Dual horsepower ratings: Std.- applies when non-time 18/4 480 Volt AC/600 Volt AC/600 Volt DC HF361J HF362J HF363J HF364J HF365JA HF366JA HF367J n HF368J n 014 020 025 049 93 98 365 388 — — — — — — 03 10 15 10 25 40 — — — — — — 05 10 20 15 30 50 480 Volt AC/600 Volt AC/250 Volt DC a — — — — — — — — — — — — — — — — delay fuses are installed. Max.- applies when timedelay fuses are installed. for use as service entrance equipment except on 1200 Amp solidly grounded wye systems per NEC 230.95. f Also rated Type 3S/3R. g Indicates oversized enclosure (30A switch with 60A e Suitable Product Category: HDSS 005 015 025 050 100 150 200 250 015 030 060 125 250 400 500 500 — — — — — — — — — — — — — — — — 0071⁄2 015 030 060 125 200 250 250 020 050 075 150 350 500 500 500 05 10 20 40 50 50 50 50 — 30h 50h 50 — — — — lugs in a 60A enclosure or 60A switch with 100A lugs in a 100A enclosure). DC & 600V DC horsepower rating shown requires (2) poles to be connected in series. 304 grade stainless steel. For switches with enclosures constructed from 316 grade stainless steel, see page 18/9.. h 600V Siemens Industry, Inc. Industrial Controls Catalog Switches • Revised • 07/15/15 Heavy Duty Safety Switches Selection Indoor — Type 1 System Ampere Catalog Rating Number Outdoor — Type 3R Ship Catalog Wt. (lbs.) Number Ship Wt. (lbs.) Horsepower Rating 240 Volt 480 Volt 600 Volt 1-Phase 3-Phase 1-Phase 3-Phase 1-Phase 3-Phase 250V 600V DC DC 600 Volt Non-Fusibled 2-Pole 480 Volt AC / 600 Volt AC / 600 Volt DC 30 60 100 HNF261 HNF262 HNF263 12 19 24 HNF261R HNF262R HNF263R 13 20 25 — — — — — — 13 19 11 19 24 24 47 75 77 295 307 5 5 10 10 10 15 15 15 15 15 15 10 10 20 20 20 40 60 125 200 250 250 3-Pole 071⁄2 20 30 — — — 10 25 40 — — — 5 10 20 15 30 50 480 Volt AC / 600 Volt AC / 250 Volt DC 30 30 60 60 60 100 200 400 600 800 1200 HNF361 — HNF362Hb HNF362a — HNF363a HNF364a HNF365Aa HNF366Aa HNF367 HNF368 12 — 11 18 — 23 46 75 77 295 305 HNF361R HNF361RLf HNF362RHb HNF362Ra HNF362RLf HNF363Ra HNF364Ra HNF365RAa HNF366RAa HNF367R HNF368R 071⁄2 071⁄2 20 20 20 30 50 50 50 50 50 20 20 50 50 50 75 125 250 400 500 500 10 10 20 25 25 40 50 50 50 50 50 30 30 40 60 60 100 150 350 500 500 500 5 5 10 10 10 20 40 50 50 50 50 — — — 30g 30g 50g 50 — — — — d 600 Volt Non-Fusible 2-Polec 480 Volt AC / 600 Volt AC / 600 Volt DC 30 60 100 Type 4 / 4X Stainless 13 HNF261S 20 HNF262S 25 HNF263Sn Type 12 Industrial HNF261J HNF262J HNF263Jn HNF361S HNF362SHb HNF362Sa HNF363Sa HNF364Sa HNF365SAa HNF366SAa HNF367S HNF368Sn HNF361J HNF362JHb HNF362Ja HNF363Ja HNF364Ja HNF365JAa HNF366JAa HNF367J n HNF368Jn 13 20 25 — — — — — — 13 14 19 24 47 75 77 295 310 5 10 10 15 15 15 15 15 15 10 20 20 40 60 125 200 250 250 3-Pole 071⁄2 20 30 — — — 10 25 40 — — — 5 10 20 15 30 50 480 Volt AC / 600 Volt AC / 250 Volt DC 30 60 60 100 200 400 600 800 1200 13 15 19 24 47 75 77 295 310 n Built to order. Allow 3-5 weeks for delivery. a 60-600A 3-Pole switches are also rated 600V DC. b Compact switch (11.1"H, 6.6"W box less cover and handle). Short circuit withstand rating—100,000 RMS sym. amps. c Use 3-Pole switch for 200A application. Siemens Industry, Inc. Industrial Controls Catalog d Suitable 071⁄2 20 20 30 50 50 50 50 50 for use as service entrance equipment except for 1200 when used on a 480 or 600V grounded wye system. e Also rated type 3S / 3R. f Indicates oversized enclosure (30A switch in a 60A enclosure or a 60A switch in a 100A enclosure. Product Category: HDSS 20 50 50 75 125 250 400 500 500 10 20 25 40 50 50 50 50 50 30 40 60 100 150 350 500 500 500 5 10 10 20 40 50 50 50 50 — — 30g 50g 50 — — — — g 600V DC and 600V DC horsepower rating shown requires (2) poles to be connected in series. grade stainless steel. For switches with enclosures constructed from 316 grade stainless steel, see page 18/9. 304 18/5 Switches • Revised • 07/15/15 Heavy Duty Safety Switches Type 3R, 4/4X, & 12 with Viewing Window Description b Metal handle with large insulating grip features a positive stop in both ON and OFF position b Ground lugs provided as standard b Type 12 enclosures are fabricated from galvanized steel and are also rated for 3R/3S outdoor applications b Type 4X stainless steel switches (30–200A) are provided with stainless steel interior parts b The widest range of accessories available including 200% neutrals, gold plated PLC auxiliary contacts and isolated ground kits 30–600A, 3-pole 600V max. in fusible and non-fusible versions in Type 4/4X stainless steel and Type 12 enclosures. All allow viewing of visible blade position. 30–200A also allow viewing of indicating type fuses. Features b Rugged installer-friendly enclosure design features a gasket flange with continuously welded seams b Tool-free cover latches b Two, three and four point mounting Maximum Horsepower Rating System Ampere Rating 240V AC Catalog Number Ship Wt. (lbs.) 1-Phase, 2-Wire 3-Pole, 3-Wire Fusible, Type 3R 30 60 HF361RW HF362RW 3-Phase, 3-Wire 480V AC 600V AC 3-Phase, 3-Wire 3-Phase, 3-Wire HNF361RW HNF362RW 17 22 3 10 7 ⁄2 15 15 30 10 20 20 50 20 50 30 60 100 200 400 600 HF361JW HF362JW HF363JW HF364JW HF365JWA HF366JWA 30 60 100 200 400 HNF361JW HNF362JW HNF363JW HNF364JW HNF365JWA 3 10 HF361SW HF362SW HF363SW HF364SW HF365SWA 17 22 26 53 93 98 3 10 15 — — — 14 21 25 51 75 a 200A HNF361SW HNF362SW HNF363SW HNF364SW HNF365SWA switches are also rated 600V DC. HP ratings listed apply only when time delay fuses are used. Maximum 18/6 5 10 — 30 20 50 75 150 350 500 5 10 20 40 50 50 — 30 50 50 — — 3 10 15 — 15 15 23 27 54 75 15 30 60 125 250 400 600 Volt AC / 250 Volt DC 3 10 15 15 15 17 23 28 55 75 71⁄2 15 30 60 125 200 3 10 15 15 15 10 20 40 60 125 20 50 75 125 250 71⁄2 15 30 60 125 15 30 60 125 250 30 60 100 150 350 5 10 20 40 50 — 30 50 50 — 600 Volt AC / 250 Volt DC 3-Pole, 3-Wire Non-Fusible, Type 4X Stainless Steel 30 60 100 200 400 — 30 600 Volt AC / 250 Volt DC 3-Pole, 3-Wire Fusible, Type 4X Stainless Steel 30 60 100 200 400 30 60 3-Pole, 3-Wire Non-Fusible, Type 12 5 10 600 Volt AC / 250 Volt DC 14 21 3-Pole, 3-Wire Fusible, Type 12 600V DC 600 Volt AC / 250 Volt DC 1 3-Pole, 3-Wire Non-Fusible, Type 3R 30 60 250V DC 20 50 75 150 350 10 20 40 60 125 Also rated 3S/3R for outdoor use. All switches are suitable for use as service entrance equipment. Use outside poles of 3-pole switch for 2-pole application. Product Category: HDSS 5 10 20 40 50 — 30 50 50 — 600 Volt AC / 250 Volt DC 20 50 75 125 250 30 60 100 150 350 5 10 20 40 50 — 30 50 50 — 600V DC and 600V DC horsepower rating shown requires (2) poles to be connected in series. grade stainless steel. For switches with enclosures constructed from 316 grade stainless steel, see page 18/9. 304 Siemens Industry, Inc. Industrial Controls Catalog Switches Heavy Duty Safety Switches Type VBII 4 & 6 Pole Heavy Duty Safety Switches Application 4 & 6-pole Switches are commonly used as a disconnecting means for two-speed, two-winding motors. Fused switches provide both over current and short circuit protection. Non-fusible switches normally provide a local disconnection means for twospeed motors which are remote from their motor controller. 4-pole switches are also used in 3-phase, 4-wire circuits when a switching neutral is required. All 4 & 6-pole switches are service entrance rated. Description 4 & 6-pole switches are available in 30-200A ratings and in both fusible and non-fusible versions. 4-pole switches are supplied with either Type 1 or Type12/3R enclosures. 6-pole switches are available with either Type 12/3R or Type 4X stainless steel enclosures. Standards b UL & CUL listed under file #E4776 b Meets UL98 for enclosed switches b 4 & 6-Pole switches are suitable for use as service entrance b Meets NEMA Standard KS-1 for enclosed switches Meets NEC wire bending space b requirements Features b Visible blade, double break switching action Highly visible ON/OFF indication b b Defeatable dual cover interlock b Padlock option in OFF position a b All copper current carrying parts b Tangenital knockouts (Type 1, 4-pole switches) HNF663S 4-Pole Type VBII Switchesab System Amp Rating Indoor Type 1 Type 12/3R Industrial Horsepower Ratings Catalog Ship Wt. Catalog Ship Wt. 240V, 2Ø, 4W 240V 3Ø Number (lbs.) Number (lbs.) Std. Std. Max. Max. 480V, 3Ø Std. Max. 600V, 3Ø 250V Std. Max. DC Fusible 600 Volt AC, 250 Volt DC — 4-Pole, 4 Fused 30 60 100 200 HF461 HF462 HF463 HF464n 36 40 43 88 HF461J HF462J HF463J HF464Jn 36 40 43 88 3 71⁄2 15 25 10 20 30 50 3 71⁄2 15 25 71⁄2 15 30 60 5 15 25 50 15 30 60 125 71⁄2 15 30 60 20 50 75 150 5 10 20 40 HNF461J HNF462J HNF463Jn HNF464Jn 32 34 36 78 — — — — 10 20 30 50 — — — — 10 20 40 60 — — — — 20 50 75 125 — — — — 30 60 100 150 5 10 20 4 240V 3Ø Std. Max. Horsepower Ratings 480V, 3Ø 600V, 3Ø Std. Std. Max. Max. Non-fusible 600 Volt AC, 250 Volt DC — 4-Pole 30 60 100 200 HNF461 HNF462 HNF463n HNF464n 32 34 36 78 6-Pole Type VBII Switchesabe System Amp Rating Type 12/3R Industrial Catalog Ship Wt. Number (lbs.) Type 4X Stainless Steel Catalog Ship Wt. Number (lbs.) c 250V DC Fusible 600 Volt AC, 250 Volt DC — 6-Pole, 6 Fused 30 60 100 200 HF661J HF662J HF663Jn HF664Jn HF661Sn HF662Sn HF663Sn HF664Sn 37 41 44 90 37 41 44 90 3 71⁄2 15 25 71⁄2 15 30 60 5 15 25 50 15 30 60 125 71⁄2 15 30 60 20 50 75 150 5 10 20 40 33 35 37 80 — — — — 10 20 40 60 — — — — 20 50 75 125 — — — — 30 60 100 150 5 10 20 40 Non-fusible 600 Volt AC, 250 Volt DC — 6-Pole 30 60 100 200 HNF661J HNF662J HNF663J HNF664J HNF661S HNF662S HNF663S HNF664Sn 33 35 37 80 n Built to order. Allow 3-5 weeks for delivery. c a Lugs b are aluminum alloy as standard. Optional copper body lugs are available. All 4 & 6-pole VBII switches are suitable for use as service equipment when a neutral is installed or equipment ground kit is properly connected. Siemens Industry, Inc. Industrial Controls Catalog d D ual horsepower ratings: Std. – applies when non-time-delay fuses are installed. Max. – applies when time delay fuses are installed. F usible switches accept Class H Fuses as the standard. Class R & J fuses can also be installed and increase the rating from 10,000 to 200,000 AIC. For Product Category: HDSS e Class J, the load base is moved upward. For Class R fuses, rejection kits are required. S upplied with factory installed ground lugs. 18/7 Switches Heavy Duty Safety Switches Special Application Switches / Interlocked Receptacle Switches Application Description ab Receptacle Safety Switches provide cord connection protection of heavy-duty portable equipment (welders, infrared ovens, batch feeders, portable conveyors, assembly line fixtures and tools, refrigerator trucks, etc.) under load or fault conditions. Type 12 and 4/4X Receptacle Safety Switches are available with 3-phase, 4-wire grounded type Crouse-Hinds Arkite™ 2 or Pyle-National receptacle, pre-wired and mounted with interlock linkage to the switch mechanism. Insertion or removal of the plug is prevented by the interlock linkage while the switch is in the “ON” position. Receptacle prevents operation of switch if incorrect plug is inserted. Standards All receptacle switches are UL listed under file #E4776. Those with a viewing window are also CSA certified under file #1079316. Crouse-Hinds Interlocked Receptacle Switches Ampere Rating Type 4/4X Catalog Number Shipping Wt. (lbs.) Std. Pkg. Accepts Crouse-Hinds Arktite a Plug Catalog Number HF321SCHs HF322SCHs HF323SCHs 23 30 36 APJ3485 & NPJ3485 APJ6485 & NPJ6485 APJ10487 & NPJ10487 HF361SCH HF362SCH HF363SCHs 24 30 36 APJ3485 & NPJ3485 APJ6485 & NPJ6485 APJ10487 & NPJ10487 22 29 35 APJ3485 & NPJ3485 APJ6485 & NPJ6485 APJ10487 & NPJ10487 24 30 36 APJ3485 & NPJ3485 APJ6485 & NPJ6485 APJ10487 & NPJ10487 22 29 35 APJ3485 & NPJ3485 APJ6485 & NPJ6485 APJ10487 & NPJ10487 Type 12 Catalog Number 240V Fusible, 3-Pole, 3-Wire 30 60 100 HF321JCH HF322JCH HF323JCH 600V Fusible, 3-Pole, 3-Wire 30 60 100 HF361JCH HF362JCH HF363JCH 600V Non-Fusible, 3-Pole, 3-Wire 30 60 100 HNF361JCHs HNF362JCH HNF363JCHs HNF361SCHs HNF362SCH HNF363SCHs 600V Fusible, 3-Pole, 3-Wire with Viewing Window 30 60 100 HF361JCHWs HF362JCHW HF363JCHWs HF361SCHWs HF362SCHW HF363SCHWs 600V Non-Fusible, 3-Pole, 3-Wire with Viewing Window 30 60 100 HNF361JCHWs HNF362JCHW HNF363JCHWs HNF361SCHWs HNF362SCHWs HNF363SCHWs Pyle-National Interlocked Receptacle Switches 3-Poles Fusible and Non-Fusible Ampere Rating Switch Receptacle 30 30 Voltage Rating 600 (F) 600 (N-F) Type 12 Catalog Number HF361JPNs HNF361JPN Type 12 Stainless Steel Catalog Number HF361SPNs HNF361SPN 60 60 240 (F) 600 (F) 600 (N-F) HF322JPNs HF362JPNs HNF362JPN — HF362SPNs HNF362SPN s Built to order. Allow 6–8 weeks for delivery. b a Arktite™ c is a registered trademark of the CrouseHinds Company. Plugs are not sold or supplied by Siemens. 18/8 Shipping Wt. (lbs.) Std. Pkg. 23 21 28 28 27 Accepts Pyle-National QuelArc™ bc Plugs Plug Catalog Number JPD-83046 JPD-116046 Indicates plug with maximum diameter cable bushing. Q uelArc™ is a registered trademark of the PyleNational Company. Product Category: HDSS A mpere rating of both switch and receptacle. A lso rated Type 3R/3S. E nclosure is constructed of Type 304 stainless steel. Siemens Industry, Inc. Industrial Controls Catalog Switches Heavy Duty Safety Switches Special Application Safety Switches / Type VBII Non-Metallic & 316 Grade Stainless Steel Application of corrosive atmospheres. They allow a wide range of operating temperatures and their insulating properties virtually eliminate problems caused by internal condensation. Siemens Non-metallic and 316 grade stainless steel switches provide a superior level of corrosion resistance to assure trouble free performance in the most severe conditions. 316 grade stainless steel provides increased corrosion resistance when compared to 304 grade, especially in atmospheres containing a high level of chlorine commonly encountered in marine and waste management applications. Our non-metallic enclosures are constructed from fiberglass reinforced polyester and are extremely resistant to a wide range Description 30-200A, 600V Max, fusible and nonfusible switches are available in both non-metallic and 316 grade stainless steel versions. All are supplied with factory installed ground bars as standard. Viewing windows are also available in the stainless offering. Type 4/4X Non-Metallic Ampere Rating Catalog Number Horsepower Rating—3-Phase Ship Weight 240 Volt AC 480 Volt AC 600 Volt AC Std. pkg. (lbs.) Std. Max. Std. Max. Std. Max. 250 Volts DC 600 Volts DC 3-Pole, 4-Wire, 240 Volt Fusible, Type 4Xe 30 60 HF321NX HF322NXs 21 22 3 71⁄2 71⁄2 15 — — — — — — — — 5 10 — — 20 50 75 150 5 10 20 40 15d 30d 50d 50 30 60 100 150 5 10 20 40 15d 30d 50d 50 3-Pole, 4-Wire, 600 Volt AC Fusible, Type 4Xbce 30 60 100 200 HF361NX HF362NX HF363NXsa HF364NXsa 21 22 39 83 3 71⁄2 15 25 71⁄2 15 30 60 5 15 25 50 15 30 60 125 71⁄2 15 30 60 3-Pole, 3-Wire, 600 AC Volt Non-Fusible,a Type 4Xbc 30 60 100 200 HNF361X HNF362X HNF363Xs HNF364Xs 20 20 38 81 — — — — 71⁄2 15 30 60 — — — — 20 50 75 125 — — — — Type 4/4X 316 Grade Stainless Steel Ampere Rating Standard With Viewing Window Catalog Number Catalog Number Ship Weight (lbs.) Horsepower Rating—3-Phase 240 Volt AC Std. Max. 480 Volt AC Std. Max. 600 Volt AC Std. Max. 250 Volts DC 600 Volts DC 3 71⁄2 15 25 71⁄2 15 30 60 — — — — 5 10 20 40 — — — — 3 71⁄2 15 25 71⁄2 15 30 60 5 10 25 50 15 30 60 125 71⁄2 15 30 60 20 50 75 150 5 10 20 40 — 30d 50d 50 20 50 75 125 30 60 100 150 5 10 20 40 — 30d 50d 50 240V AC, 250V DC Fusible 3-Pole, 3-Wire 30 60 100 200 HF321SSs HF322SSs HF323SSs HF324SSs — — — — 15 19 27 48 — — — — — — — — — — — — 600V AC, 250V DC Fusible 3-Pole, 3-Wirec 30 60 100 200 HF361SS HF362SS HF363SS HF364SS HF361SSW HF362SSW▲ HF363SSWs HF364SSWs 17 21 28 54 600V AC, 250 V DC Non-Fusible 3-Pole, 3-Wireac 30 60 100 200 HNF361SS HNF362SS HNF363SS HNF364SS HNF361SSW HNF362SSWs HNF363SSWs HNF364SSWs s Built to order. Allow 6–8 weeks for delivery. a Also 15 21 26 51 — — — — 10 20 40 60 — — — — b Add used for 240 volt applications. c Siemens Industry, Inc. Industrial Controls Catalog — — — — “L” to end of catalog number for switches less line & load lugs with mounting hardware for crimp type or copper body lugs. 200A switches are also rated 600V DC max. Product Category: HDSS d 600V DC voltage and horsepower rating shown requires (2) poles to be connected in series. with factory installed neutral. e Supplied 18/9 Switches • Revised • 04/30/15 Heavy Duty Safety Switches Enclosed Solar Photovoltaic (PV) Switches Application Description Solar disconnect switches are designed to be used in the DC portion of photovoltaic power generation circuits. They incorporate powerful magnets within the switch line base which work in combination with a double break switching action to quickly dissipate the very hot arc that is generated when a 600V DC circuit is opened under load. These circuits are defined by article 690 of the NEC which requires the grounded conductor to be at ground potential at all times and therefore cannot be switched. 30-200A switches are available in both Type 1 and 3R enclosures and in both fusible and non–fusible versions. They are provided with an additional door mounted warning label as required by the NEC and are supplied with a factory installed equipment ground bar. They are built to UL98 requirements but are UL listed in file number E335018 as UL1741 photovoltaic disconnect switches. They are 3 pole switches that are approved to switch 3 separate 600V DC circuits (one per pole). The design incorporates many of the standard VBII switch features including a rolled out enclosure front flange, a large metal operating handle, oversized line and load lugs and large wire gutters. 1000VDC photovoltaic switches are UL98B listed for solar applications and comply with article 690 of the NEC. The new 400-600Amp switches are also UL98B listed at 600VDC and come in NEMA Type 3R. HF362PV Solar Photovoltaic Enclosed Disconnect Switches Indoor – Type 1 Ampere Rating Catalog Number Outdoor – Type 3R Ship Wt* Std. Pkg. Catalog Number Ship Wt* Std. Pkg. Rated Isc Per NEC Article 690 Negative Ground 3 Pole 3 Wire Fusible 600Volt DC HF361PV HF362PV HF363PV▲ HF364PV▲ 30 60 100 200 14 20 25 49 HF361RPV HF362RPV HF363RPV HF364RPV 15 21 26 50 19.2 38.4 64.0 128.0 A A A A 24.0 48.0 80.0 160.0 A A A A Negative Ground 3 Pole 3 Wire Non-Fusible 600Volt DC HNF361PV HNF362PV HNF363PV▲ HNF364PV▲ 30 60 100 200 NEW HNF361RPV HNF362RPV HNF363RPV HNF364RPV 13 20 25 48 Positive and Negative Ground, 1 Pole, Fusible 1000 Volt DC HF1104NPV▲ 200 NEW 12 19 24 47 52 HF1104NRPV▲ 53 128.0A HNF361RPV Positive and Negative Ground, 1 Pole, Non-Fusible 1000 Volt DC HNF1104NPV▲ 200 50 HNF1104NRPV▲ 51 160.0A Positive Ground 3 Pole 3 Wire Fusible 600Volt DC HF361PVPG HF362PVPG▲ HF363PVPG▲ HF364PVPG▲ 30 60 100 200 14 20 25 49 HF361RPVPG HF362RPVPG HF363RPVPG▲ HF364RPVPG▲ 15 21 26 50 19.2 38.4 64.0 128.0 A A A A 24.0 48.0 80.0 160.0 A A A A Positive Ground 3 Pole 3 Wire Non-Fusible 600Volt DC HNF361PVPG HNF362PVPG▲ HNF363PVPG▲ HNF364PVPG▲ 30 60 100 200 NEW 12 19 24 47 HNF361RPVPG HNF362RPVPG HNF363RPVPG▲ HNF364RPVPG▲ 13 20 25 48 Positive and Negative Ground, 2 Wire, 600Volt DC, Type 3R Amperage Rating 400A 400A 400A 400A 600A 600A 600A 600A No. Poles 1 1 2 2 1 1 2 2 Fuse Type Fusible Non-fusible Fusible Non-fusible Fusible Non-fusible Fusible Non-fusible s Built to order. Allow 6–8 weeks for delivery. * In pounds (lbs) 18/10 Catalog Number HF165NRPV▲ HNF165NRPV▲ HF265NRPV▲ HNF265NRPV▲ HF166NRPV▲ HNF166NRPV▲ HF266NRPV▲ HNF266NRPV▲ Ship Wt* Std. Pkg 165 127 325 315 167 129 327 315 Rated Isc Per NEC Article 690 256A 256A 256A 256A 384A 384A 384A 384A Note: All disconnects are rated at 10,000 AIC per UL requirements when used with or protected by Class K, J or R fuses rated at 600VDC. Product Category: HDSS HNF363RPV Siemens Industry, Inc. Industrial Controls Catalog Switches • Revised • 07/15/15 Heavy Duty Safety Switches Accessories HT63 HR612 Class R Fuse Clip Kits Class T Fuse Adapter Kits All General Duty and Heavy Duty Switches are field convertible to accept Class R Fuse Clip Kits. The kits prevent the installation of Class H and K fuses (one kit required per 3-pole switch). All 100-600A, General Duty and 100200Amp and 1200Amp Heavy Duty Switches are field convertible to accept Class T fuses.800A switches are field convertible to accept Class T fuses by moving the load base to a pre-drilled T fuse position. Class R Fuse Clip Kits Catalog Number Description GSRK321 HR21 HR612 HR62 HR63 HR64 HR65A HR66A 30A, 240V 30A, 240V 30A, 600V 60A, 600V 100A Kit 200A Kit 400A Kit 600A Kit Class T Fuse Adapter Kitsa Kit (GD only) Kit (HD only) Kit/60A, 240V Kit Kit Class J Fusing All 30-600A, 600V and 100-600A,240V fusible Heavy Duty Switches are field convertible to accept Class J fuses by moving the load base to a pre-drilled J fuse position. All 100-600A, 240V fusible General Duty switches can also be field converted to accept Class J fuses. Class J Fuse Kits Catalog Number Description HJ66A 600A, 240V/600V Kit Internal Shield Kits (for fusible switches) Kits provide a clear plastic inner door to prevent accidental contact with live parts. Test probe holes are provided and fuses can be replaced without removal of kit. NEW Kit Catalog Number HSK61SSW 60A HD HSK62SSW 100A HD HSK63SSW 200A HD HSK64SSW s Built to order. Allow 6–8 weeks for delivery. a Catalog Number Description HT23 HT63 HT24 HT64s HT25A HT65A HT26A HT66A TFAK82 100A, 240V Kit 100A, 600V Kit 200A, 240V Kit 200A, 600V Kit 400A, 240V Kit 400A, 600V Kit 600A, 240V Kit 600A, 600V Kit 1200A, 240V Kit Neutral Kits Standard Neutral Kits can be field installed in General and Heavy Duty Switches. Neutral Kits Switch Ampere Rating Kit Catalog Number 30 GD 30 HD, 60 GD 60, 100 HD, 100 GD 200 400 & 600 800 & 1200 W410190 HN612 HN623 HN64 HN656A HN678 O ne kit per pole required. Siemens Industry, Inc. Industrial Controls Catalog HN264 200% Neutral Kits UL listed 200% Neutrals are available on 100-600A Heavy Duty Switches. They are typically used with non-linear transformers or where increased neutral ampacity/lug capacity is required. 200% Neutral Kits Switch Ampere Rating Kit Catalog Number 100 200 HN263 HN264 400 HN656A 600 HN678A Wire Range Line & Load Lugs (Cu/Al) (2) (2) (2) (2) (2) (2) #14-1/0 AWG #6 AWG-300 Kcmil 1/0 AWG-600 Kcmil #6 AWG-300 Kcmil 1/0 AWG-600 Kcmil #6 AWG-300 Kcmil Fuse Puller Kits Fuse Puller Kits are field installable in 30-100A Type VBII Heavy Duty Switches (one kit required per 3-pole switch). Internal Shield Kits b Switch Ampere Rating 30A HD HN612 Fuse Puller Kits HP61 b Switch Ampere Rating 030 Fuse Puller Kit Catalog Number HP61 060 HP62s 100 HP63s N ot designed for use in Non-metallic 4X safety switches. Not designed for use with Auxiliary Contacts. Product Category: HDSS 18/11 Switches • Revised • 07/15/15 Heavy Duty Safety Switches Accessories HA161234 HA261234 HLC612 Auxiliary Contacts NEW HG261234 Quick Connects Auxiliary Contacts are available only for Heavy Duty Switches. The auxiliary contacts are available in 1 normally open and 1 normally closed or 2 normally open and 2 normally closed configurations. Siemens offers a PLC Auxiliary Switch (30200A) that has very low resistance for low voltage and current typical in PLC circuits. All auxiliary contacts make after and break before main switch contacts. They provide two point control power take-off capability and are normally used on two poles on the line side when it is required to have control power available when the switch is in the OFF position. They provide a mounting provision for standard ¼” quick connect terminal. Installed in the line or load side. 30A VBII switches have lugs UL listed to accept (2) wires per pole as standard so a 30A kit is not required. Auxiliary Contacts Quick Connects Kit Ampere Rating Switch Ampere Aux. Switch Catalog Number 125V AC Max. 250V AC Max. Horsepower Rating 28V DC Max. 125V AC Max. 250V AC Max. 1/2 1/2 3/4 3/4 1/2 1/2 3/4 3/4 1/2 1/2 3/4 3/4 Catalog Number Description HCQ62 HCQ63 HCQ64 60A 2 wire quick connect kit 100A 2 wire quick connect kit 200A 2 wire quick connect kit With 1 NO & 1 NC Isolated Contacts 30-600 800-1200 HA161234 HA165678 10 10 10 10 7 — With 2 NO & 2 NC Isolated Contacts 30-600 800-1200 HA261234 HA265678 10 10 10 10 7 7 Low Current PLC Type with 1 NO & 1 NC Gold Plated Contacts 30-600 800-1200 HA361234 HA365678 10 10 10 10 7 — Copper Lug Kits Heavy duty switches are UL approved to accept field installed copper lug kits. 30–60 100 200 400-600 800–1200 Copper Lug Catalog Number Description HLC612 HLC63s HLC64s HCU656An HLC65678 (9) Lugs/ Kit #14-4 AWG Cu (9) Lugs/Kit #14-1/0 AWG Cu (9) Lugs/Kit #6 AWG-300 Kcmil Cu (1) Lugs/Kit #1/0 AWG-600 Kcmil Cu (1) Lugs/Kit #1/0 AWG-600 Kcmil Cu s Built to order. Allow 6–8 weeks for delivery. n Purchase field replacement kit along with lugs. 18/12 Isolated Ground Kits are available on 30-600A Heavy Duty Switches. They are normally used on circuits with a high content of computer or other electronic loading which require a ground which is isolated from the building ground and neutral circuits. The kit includes both isolated and grounded terminals as listed below. Isolated Ground Kits Switch Ampere Rating Catalog Number 30–200 HG261234 2 2 400–600 HG2656A 4 4 Number of Terminals Isolated Grounded Wire Range Per Terminal (Cu/Al) #14-4 AWG 2/0-14 AWG 2/0-6 AWG Equipment Ground Kits Copper Lug Kits Switch Ampere Rating Isolated Ground Kits Equipment Ground Lug Kits are available for all General and Heavy Duty Switches. They are field installable in Type 1 and Type 3R Switches and are factory installed as standard in Type 4 / 4X and Type 12 and also in all VBII 4&6-pole Switches. Equipment Ground Kits Switch Ampere Rating Catalog Number Number of Terminals 30A GD 60–200 GD 30–200 HD 400 & 600 800–1200 GSGK60 HG61234 HG61234 HG656A HG678 2 2 2 4 8 Product Category: HDSS Wire Range Per Terminal (Cu/Al) #14-8 AWG #14-4 AWG #14-4 AWG 2/0-6 AWG #6 AWG-250 Kcmil Siemens Industry, Inc. Industrial Controls Catalog Switches • Revised • 07/15/15 Heavy Duty Safety Switches Hub and Lug Data Interchangeable Hubs Conduit hubs are available for Type 3R, 12 and 4 / 4X applications. 30-200A Type 3R Switches are provided with a conduit hub provision and a removable hub plate on their top rainshed. Conduit Size (inches) Catalog Number a Used On Type 3R Cover 3/4 1 1 1/4 Cover 3/4 1 1 1/4 1 1/2 2 2 1/2 2 1/2 3 3 1/2 4 ECHA000 ECHA075 ECHA100 ECHA125 ECHS000 ECHS075 ECHS100 ECHS125 ECHS150 ECHS200 ECHS250 ECHV250 ECHV300 ECHV350 ECHV400 b 30A GD Only SSH075 SSH100 SSH125 SSH150 SSH200 SSH250 SSH300 SSH350 SSH400 All Heavy Duty Switches are field convertible for (Crimp) type lugs. When compression lugs are required for 30-100A switches, a neutral barrier kit is required for 1-Phase, 3W or 3-Phase, 4W applications. When compression lugs are required on 400-1200A switches, lug mounting kits are required. 60–200A GD 30–200A HD 400–1200A SSH150 Field Replacement Kits and Neutral Barrier Kits Switch Ampere Catalog Rating Number Type 4/4X 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 Field Replacement Kits and Neutral Barrier Kits 30 60 & 100 400 HCL612 Kit Description Neutral Barrier Kit HCL623 Neutral Barrier Kit HCM65A 240V/600V Fusible Kit 240/600V NonFusible Kit 240V/600V Fusible Kit 240V/600V NonFusible Kit 1 Pole, Compression Lug Mounting Kit 400 HNCM65A 600 HCM66A 600 HNCM66A 800 & 1200e HCL65678n ECHV300 Lugs 30–200A 400–600A Note: 30 thru 200A. Type 3R Switches have removable hub plates on rainshed. 400A and larger Type 3R Switches have no provisions for mounting hubs. Drill or punch hole in the field to accommodate hub size desired. 30 & 60A Switches are suitable for use with 60° or 75°C wire. 100–1200A are suitable for use with 75°C rated wire. ECHS200 Multiple Padlock Accessory A tamper-proof device to provide for multiple padlocking to meet OSHA or plant requirements. Accepts up to 6 1/4” padlocks. Catalog number SL0420. Standard Carton-12. Wire Ranges (Line, Load and Standard Neutral) Switch Ampere Rating Wire Range with Wire Bending Space Per NEC Requirements 30GD 30HD 60hj 100k 200i #14-8 AWG (Cu/AI)f #14-6 AWG (Cu/AI) #14-3 AWG (Cu/AI) #14-1/0 AWG (Cu/Al) #6 AWG-250 Kcmil (Cu/Al) (1) 1/0 AWG-600 Kcmil (Cu/Al) (2) 1/0 AWG-500 Kcmil (Cu/Al) (1) 1/0 AWG-600 Kcmil (Cu/Al) (2) 1/0 AWG-500 Kcmil (Cu/Al) (3) 1/0 AWG-750 Kcmil (Cu/Al) Line Load (4) 1/0 AWG-750 Kcmil (Cu/Al) neutral (4) 3/0 AWG-750 Kcmil (Cu/Al) Line Load (4) 1/0 AWG-750 Kcmil (Cu/Al) neutral 400g 600g 800 1200 Siemens Industry, Inc. Industrial Controls Catalog Lug Wire Range #14-6 AWG (Cu/Al) #14-2 AWG (Cu/Al) #14-2 AWG (Cu/Al) #14-1/0 AWG (Cu/Al) #6 AWG-300 Kcmil (Cu/Al) (2) 1/0 AWG-600 Kcmil (Cu/Al) (2) 1/0 AWG-600 Kcmil (Cu/Al) (3) 1/0 AWG-750 Kcmil (Cu/Al) Line Load (4) 1/0 AWG-750 Kcmil (Cu/Al) neutral (4) 1/0 AWG-750 Kcmil (Cu/Al) Line Load (4) 1/0 AWG-750 Kcmil (Cu/Al) neutral Product Category: HDSS SL0420 n Built to order. Allow 3-4 weeks for delivery. Hubs suitable for 3R Switches. lso suitable for Type 12 applications. A Neutral Barrier kits are required on 30-100A switches only and only with 1-Phase / 3W or 3-Phase / 4W loads. Compression Lugs mounting kits are required on 400-1200A switches only. d Provides mounting for a single line or load lug. e Provides mounting for (2) compression lugs per phase on line or load. f Line base lugs (only) are UL approved to accept #14-6 CU/Al cable. g Max. wire size for height reduced switches is 500 kcmil (Cu/Al). h All but 60A GD & Compact HD NF switches are also UL approved for #2 Cu/Al conductors. i All 200A Heavy Duty Switches have a wire range & wire bending space for (1) #6-300 Kcmil (Cu/Al). j Also for 30A oversized heavy duty switches. k Also for 60A oversized heavy duty switches. a b c 18/13 Switches Enclosed Switches Rotary Disconnect Switches in Non-Metallic Enclosures Description Siemens Enclosed Rotary Disconnect Switches 16–125A non-fusible switches are available in fiberglass reinforced polycarbonate enclosures which are UL approved as Type 12 & 4X and for either indoor or outdoor use. All are horsepower and load break rated. All are panel mounted and are either supplied with factory installed aux. contacts or will accept contact kits. All are compact in size while providing ample wiring space for copper line & load conductors. b 16–125A, Non-Fusible b600VAC max. rated (except catalog no. HNF3100CX is rated 480VAC max.) b Hinged door switches are UL listed for multiple line and load conductors per phase in 30–100A ratings. They are UL & CUL listed under File No. E191706 bAvailable in both Type 12 and 4X non-metallic enclosures bRotary handles are available in black, red, and yellow and in pistol grip designs b Both screw and hinged cover designs available bListed and marked “suitable for use as motor disconnect” per NEC Section 430-109 b 16–63A screw cover switches have factory installed ground bars. All hinge cover switches accept ground lug kits bScrew cover switches are UL listed under File No. E47705 and are CSA certified under File No. 203576 b Screw cover switches are provided with knockouts b IEC 60947-3 rated and CE marked (enclosures are IP65 rated) b Padlockable in OFF position with up to (3) padlocks bHP rated Catalog Number Ampere Rating 3 Pole, 3 Wire 3 Pole, 3 Wire with (1) NO & (1) NC Aux. Contacthi Horsepower Ratings Shipping Weight a 240V AC 1 Phase 3 Phase Non-Fusible, Type 1, 4X & 12Kb with Screw Cover and Black Rotary Handle 600V AC Max.e 16 25 30 30 30 63 100 125 3LD2064-0TB51-0US2 3LD2164-0TB51-0US2 3LD2264-0TB51-0US2 — — 3LD2565-0TB51-0US2 3LD2766-0TB51-0US2 3LD2866-0TB51-0US2 3LD2064-1GP51-0US2 3LD2164-1GP51-0US2 3LD2264-1GP51-0US2 3LD2264-1TS51-0US2fs g 3LD2264-2TW51-0US2 s 3LD2565-1GP51-0US2s 3LD2766-1GP51-0US2s 3LD2866-1GP51-0US2s 1 1 1 1 1 3 6 6 11⁄2 3 3 3 3 10 — — 3 71⁄2 1 7 ⁄2 71⁄2 71⁄2 15 30 40 480V AC 3 Phase 600V AC 3 Phase 71⁄2 10 15 15 15 40 60 75 10 15 20 20 20 50 75 100 Non-Fusible, Type 1, 4X & 12Kb with Screw Cover and Red and Yellow Rotary Handle 600V AC Max.e 16 25 30 30 30 63 100 125 3LD2064-0TB53-0US2 3LD2164-0TB53-0US2 3LD2264-0TB53-0US2 — — 3LD2565-0TB53-0US2 3LD2766-0TB53-0US2s 3LD2866-0TB53-0US2s 3LD2064-1GP53-0US2 3LD2164-1GP53-0US2 3LD2264-1GP53-0US2 f 3LD2264-1TS53-0US2 s g 3LD2264-2TW53-0US2 s 3LD2565-1GP53-0US2s 3LD2766-1GP53-0US2s 3LD2866-1GP53-0US2s 1 1 1 1 1 3 6 6 3 Pole, 3 Wire 3 71⁄2 1 7 ⁄2 71⁄2 71⁄2 15 30 40 71⁄2 10 15 15 15 40 60 75 10 15 20 20 20 50 75 100 3 Phase c 1 Phase 5 7½ 15 25 5 7½ 20 30 c 10 15 40 50 — 20 50 — 7½ 20 30 30 10 15 40 50 — 20 50 — 15 40 50 20 50 — Horsepower Ratings Catalog Number Ampere Rating 11⁄2 3 3 3 3 10 — — 3 Pole, 3 Wire with (1) NO & (1) NC Aux. Contacthi Shipping Weighta 120V AC 240V AC 1 Phase 1 Phase 480V AC 600V AC 3 Phase 3 Phase 3 Pole, Non-Fusible, Type 12 with Screw Cover and Black Rotary Handle 480V AC Max 20 30 60 100 HNF3020CJ HNF3030CJ HNF3060CJ HNF3100CJ — — — — 1 2 4 5 ¾ 2 3 5 2 3 10 15 3 Pole, Non-Fusible, Type 12 with Screw Cover and Red and Yellow Rotary Handle 480V AC Max 20 30 60 100 HNF3020CJE HNF3030CJE HNF3060CJE HNF3100CJE 3 Pole, Non-Fusible, Type 4, 4X 30 60 100 HNF3030CX HNF3060CX HNF3100CX — — — — 1 2 4 5 — — — 4 4 5 2 3 10 15 5 7½ 15 25 with Hinged Door and Black Pistol Grip Rotary Handle 480V AC Max.c s Built to order. Allow 6–8 weeks for delivery. a Carton quantity of (1). Shipping weight in pounds (lbs.). b Approved for indoor/outdoor use. No cover interlock provided. c 30 and 60A switches are also rated 600V AC. d Also rated as Type 12 and UL approved for both indoor and outdoor use. Defeatable cover interlock provided. 18/14 ¾ 2 3 5 2 3 5 e Screw 3 10 15 cover enclosures are constructed from Makrolon 9425. Hinged cover enclosures are constructed from fiberglass reinforced polycarbonate. f Switch is supplied with (2) NO and no NC aux. contacts. g Switch is supplied with (4) NO and no NC aux. contacts. Ground bar is not provided or available. Product Category: HDSS 7½ 15 25 7½ 20 30 h Aux. contacts break about 3 Ms before and make about 3 Ms after main switch contacts. 25A, switch with 1 NO & 1 NC aux. contacts and a black operating handle is also available. Order catalog number 3LD2165-4VD51 (Discount Code: Pilot Devices). i 6P, Siemens Industry, Inc. Industrial Controls Catalog Switches Enclosed Switches Rotary Disconnect Switches Wire ranges 60/75°C Cu Only Enclosed Disconnect Switch Dimensions (Inches)* Catalog Ampere Fig. Number Rating No. 3LD2064- 16 3LD2164- 25 3LD2264- 30 1 3LD2565- 63 3LD2766- 100 3LD2866- 125 HNF3020CJ 20 HNF3020CJE 20 1 HNF3030CJ 30 HNF3030CJE 30 HNF3060CJ 60 HNF3060CJE 60 1 HNF3100CJ 100 HNF3100CJE 100 HNF3030CX 30 HNF3060CX 60 2 HNF3100CX 100 A 5.52d 5.52d 5.52d 6.93e 11.90 11.90 4.92 4.92 6.89 6.89 9.46 9.46 11.77 11.77 7.87 11.77 11.77 Dimensions B C 3.94 3.19 3.94 3.19 3.94 3.19 5.75 4.10 8.35 5.36 8.35 5.36 2.95 3.94 2.95 3.94 4.92 3.94 4.92 3.94 6.31 4.77 6.31 4.77 7.87 5.20 7.87 5.20 7.87 5.20 7.87 5.20 7.87 5.20 D 4.57 4.57 4.57 5.87 7.13 7.13 5.44 5.44 5.44 5.44 6.27 6.27 6.70 6.70 7.29 7.29 7.29 Note: 3LD2 Type switches only have top and bottom end KOs as follows: 16-30A - 1/2” & 3/4”, 63A - 3/4” & 1”, 100 & 25A - 1” & 1 1/4” Figure 1 3LD2 Type Switches c 16 Amps 25–30 Amps 63 Amps 100–125 Amps (1) #18-10 AWG (1) #14-10 AWG (1) #14-6 AWG (1) #12-1 AWG HNF Type Switches 30 Amps (1) #14-#10 AWG Solid (1) #14-#4 AWG Stranded Up to (4) #12 AWG Solid Up to (3) #12 AWG Stranded Up to (6) #14 AWG Stranded Up to (4) #14 AWG Stranded with (1) #10 AWG Stranded 60 & 100 Amps (1) #14-#10 AWG Solid (1) #14-#1 AWG Stranded (2) #6 AWG Stranded Up to (3) #8 AWG Stranded Up to (6) #10 AWG Stranded Up to (6) #12 AWG Solid Figure 2 UL and CUL Short Circuit Withstand Ratings Short Circuit Withstand Rating and Fuse Class With Line Side Fusing Ampere 5 kA at Rating 600V Max With Load Side Fusing a 10 kA at 18 kA at 600V Max 480V Max 5 kA at 480V Max 18 kA at 480V Max — — 3LD2 Type Switchesh 16 RK5 (50A Max) — — RK5 25 & 30 (80A Max) — — — — 63 — — — — RK5 Max) (175A 100 & 125— RK5 Max) (200A — — a For — Ferraz Shawmut A50P or lower let-through semiconductor fuses (60A Max) Ferraz Shawmut A50P or lower let-through semiconductor fuses (100A Max) use as supplemental protection on the load side of the branch circuit over current protective device. b Ground lug kit has two lugs for #14-4 Cu/Al wire. c Factory installed ground lugs supplied as follows: 16-30A #14-10 Cu, 63A #14-8 Cu. Ground lug not provided and is not available on catalog numbers 3LD2264-2TW51-0US2 and 3LD2264-2TW53-0US2. d 6.38 inches high including mounting feet. e 7.85 inches high including mounting feet. f 60 & 100A HNF switches are rated 10kA at 480V max. with line side Class H, K & RK5 150A max. fuses. g Wire range (1) #14-2 AWG 60/75 °C Cu only. h 16-63A 3LD switches are also rated 5kA at 600VAC max when protected by a 3RV type MSP of the same or lesser ampere rating. *For inches / millimeters conversion, multiply inches by 25.4. Siemens Industry, Inc. Industrial Controls Catalog Ampere Rating gG Fuse Size Short Circuit Rating 3LD2 Screw Cover Switches HNF Type Switches H, K & RK5 H, K & RK5 30 — (100A Max) (30A Max) J, T & CC (100A Max) H, K & RK5 60 (150A Max) H, K & RK5 (60A Max) f 100 f IEC Fuse and Withstand Ratings 16 20A 5k Arms 25 25A 10k Arms 32 50A 10k Arms 63 63A 15k Arms 100 100A 20k Arms 125 125A 20k Arms HNF Hinged Cover Switches 30 63A 10k Arms 60 100A 10k Arms 100 100A 10k Arms Accessories Switch Ampere Rating Catalog Number 3LD2 Type Switches Description c 16–30A 3LD9220-2C Neutral Kit 63A 3LD9250-2CA Neutral Kit 100–125A 3LD9280-2C Neutral Kit HNF Type Switches 30–100A GSGK60 Ground Lug Kit b 30A LBRA1 Auxiliary Contact Kit (1 NO-1 NC) 60–100A LBRA2 Auxiliary Contact Kit (1 NO-1 NC) 30–100A HF63CX g Product Category: HDSS Neutral Kit 18/15 Switches Disconnect Switches Compact Non-Fusible — Rotary and Toggle Features b 16–250 Ampere, to 100 hp, 480V & 600V b Rotary and Toggle actuation models bLBR Type switches are padlockable in the OFF position and are UL & CUL listed under File No. E191706 as manual motor controllers per UL Standard UL508 b3LD2 Type switches are padlockable in the OFF position and are UL listed under File No. E47705 per UL508 and are CSA certified under File No. 203576 b Base, DIN-rail and door mounting Type LBR Rotary Switches bMultiple conductor, distribution terminal type rating LBR & LBT Type (40A -100A only) Type LBT Toggle Switches b IEC 947-1 rated, CE marked bListed and marked “suitable as motor disconnect” per NEC Section 430-109 Short Circuit Withstand Ratings Application 5kA with Line Side Class H, K, or RK5 Fuses Siemens Load Break Switches are listed as manual motor controllers and are suitable as motor disconnects. They are load break rated and act as enclosure disconnects when short circuit protection is provided upstream of the switch. If upstream over current protection is not provided, use a Siemens fusible Type VBII, CFS or MCS Disconnect Switch. Ordering Information Door Mounted Switches (Rotary Type Only) — Order either complete “3LD2” assemblies or individual “LBR” components as follows: Complete Assemblies include switch, handle, and shaft. Certain 25 and 32A assemblies are also available with factory installed neutral blocks and/or aux. contacts. These accessories can also be ordered as field installed kits. Individual Components are ordered as follows: 25A — LBR3025D switch + LBRH3 or 4 handle. 40–100A — LBR switch + LBRH3 or 4 handle + LBRD1. Notes: (LBR Type switches only) 1. Aux contacts are available as field installed kits on 25A units only. 2. Lugs on 25A units face to the rear and lugs on 40–100A units face toward the front. a Includes auxiliary contacts (1 NO and 1 NC). are IP65 rated and are also UL listed for Type 1, 4X and 12 applications. b Handles 18/16 Switch Rating & Type Max. Line Side Fuse Rating 25 & 32A 3LD2 80A Max. at 600V AC Max. 63A 3LD2 3LD2254-0TK51 175A Max. at 600V AC Max. 10kA with Line Side Class H, K, or RK5 Fusesd Base/DIN Rail Mounted Switches (Rotary or Toggle Type) — Order individual components as follows: Toggle — Order the LBT switch required and a toggle switch cover plate if needed. Rotary, Base Mounted with Door Mounted Handle — Order “LBR” switch + door mounted handle + shaft + any accessories. Rotary, Base Mounted with Direct Mounted Handle — Order “LBR” switch + direct mounted handle. 25A LBR 30A Max. at 480V AC Max. 40A, 4P LBR & LBT 60A Max. at 480V AC Max. 40 & 60A, 3P LBR & LBT 100A Max. at 480V AC Max. 80 & 100A LBR & LBT 150A Max. at 480V AC Max. 18kA with Line Side Class J, T, or CC Fuses 40–100A, 3P LBR & LBT 100A Max. at 480V AC Max. Note: 3LD2 switches are also rated 5kA at 600V AC Max. when protected by a 3RV motor starter with a FLA rating equal to or less than the switch ampere rating. Door Mounted Complete Assemblies Operator, Shaft, & Switch) 600V AC Max.b Shaft Mounted 4 Hole Mounted Catalog Numberc Catalog Numberc — AC Horsepower Ratings Number Ampere of Poles Rating 120V 240V 480V 600V 1Ø 1Ø 3Ø 3Ø 3Ø 3LD2003-1TP53a 3 16 1 ⁄2 11⁄2 3 3LD2154-0TK 3LD2154-1TP 3LD2154-1TL 3LD2154-2EP 3LD2103-0TK 3LD2103-1TP 3LD2103-1TL 3LD2103-2EP 3 3a 3+N 3 + Na 25 2 3 3LD2254-0TK 3LD2254-1TL 3LD2555-0TK — — 3LD2203-0TK 3LD2203-1TL 3LD2504-0TK 3LD2704-0TK 3LD2804-0TK 3 3+N 3 3 3 32 2 3 63 100 125 — — — 71⁄2 10 71/2 10 15 10 20 20 10 15 — 30 — 40 40 60 75 50 75 100 c Add 51 for a black handle or 53 for a red & yellow handle to the end of the catalog number. d 100-250A 3LD2 switches are rated 10kA when protected by 200A Max. Class RK5 fuses. Product Category: PILO Siemens Industry, Inc. Industrial Controls Catalog Switches Disconnect Switches Compact Non-Fusible — Rotary and Toggle 3LD Type Base Mounted Complete Assemblies (Operator, Shaft, & Switch) 600V AC Max.b Handle mountingb Shaft 4 Hole (center hole) (no defeat) Catalog Number Catalog Number — 3LD2013-0TK5_ — — 3LD2144-0TK5 3LD2113-0TK5 3LD2144-1TL5 3LD2113-1TL5 3LD2244-0TK5 3LD2213-0TK5 3LD2244-1TL53 3LD2213-1TL53 3LD2545-0TK5 3LD2514-0TK5 — — — 3LD2714-0TK5 AC Horsepower Ratings 4 Hole (with defeat) Catalog Number 3LD2017-0TK1 3LD2017-1TL1 — — 3LD2217-0TK1 3LD2217-1TL1 3LD2517-0TK1 3LD2517-1TL1 — 120V 240V 480V 600V Number Ampere 1Ø 3Ø 3Ø 3Ø of Poles Rating 1Ø 3 16 ½ 1½ 3 7½ 10 3+N 3 25 2 3 7½ 10 15 3+N 3 32 2 3 10 20 20 3+N 3 63 3 10 15 40 50 3+N 3 100 — — 30 60 75 — 3LD2814-0TK5 — 3 125 — — 40 — 3LD2318-0TK1 — 3 160 — — — 3LD2418-0TK1 — 3 250 — — 75 100 40 75 75 50 100 75 Base Mount 3LD2217-0TK13 Accessories for Front Mounted 3LD2 Switches Catalog Number 3LD9200-5Bc 3LD9200-5BFc Description 1 NO, 1 NC Aux. Contact 1 NO, 1 NC Aux. with Gold Plated Contacts Switches Used With 25-125A 25-125A 3LD9220-2B 3LD9250-2BA 3LD9280-2B Neutral/Ground Terminal Neutral/Ground Terminal Neutral/Ground Terminal 25 & 32A 63A 100 & 125A 3LD9220-0B 3LD9250-0BA 3LD9280-0B 4th Pole (leading ON, lagging OFF) 4th Pole (leading ON, lagging OFF) 4th Pole (leading ON, lagging OFF) 25 & 32A 63A 100 & 125A 3LD9224-1Ba 3LD9284-1Ba 3LD9224-3Ba 3LD9284-3Ba Black Handle (4 hole mtg.) Black Handle (4 hole mtg.) Red/Yellow Handle (4 hole mtg.) Red/Yellow Handle (4 hole mtg.) 25 & 32A 63-125A 25 & 32A 63-125A 3LD9224-1Da 3LD9284-1Da 3LD9224-3Da 3LD9284-3Da Black Handle (shaft mtg.)d Black Handle (shaft mtg.)d Red/Yellow Handle (shaft mtg.)d Red/Yellow Handle (shaft mtg.)d 25 & 32A 63-125A 25 & 32A 63-125A Terminal Cover 1P (Pack of 4) Terminal Cover 3P (Pack of 4) Terminal Cover 3P (Pack of 4) 25 & 32A 25 & 32A 63A 3LD9221-2Aa 3LD9221-0Aa 3LD9251-0Aa 3LD9220-2C Accessories for Base Mounted 3LD2 Switches 3LD9200-5Cc 3LD9200-5CFc 1 NO, 1 NC Aux. Contact 1 NO, 1 NC Aux. with Gold Plated Contacts 25-250A 25-250A 25 & 32A 63A 100 & 125A 160 & 250A 3LD9220-2C 3LD9250-2CA 3LD9280-2C 3LD9240-2C Neutral/Ground Neutral/Ground Neutral/Ground Neutral/Ground 3LD9220-0C 3LD9250-0CA 3LD9280-0C 3LD9240-0C 4th 4th 4th 4th 3LD9224-1Ba 3LD9284-1Ba 3LD9224-3Ba 3LD9284-3Ba Black Handle (4 hole mtg. no defeat) Black Handle (4 hole mtg. no defeat) Red/Yellow Handle (4 hole mtg. no defeat) Red/Yellow Handle (4 hole mtg. no defeat) 25 & 32A 63-125A 25 & 32A 63-125A 3LD9251-0A 3LD9224-1Da 3LD9284-1Da 3LD9224-3Da 3LD9284-3Da Black Handle (shaft mtg.) Black Handle (shaft mtg.) Red/Yellow Handle (shaft mtg.) Red/Yellow Handle (shaft mtg.) 25 & 32A 63-125A 25 & 32A 63-125A Note: 3LD2 shaft lengths allow the following maximum enclosure depths from the switch mounting surface to the outside of the cover: Terminal Cover 1P (Pack of 4) Terminal Cover 3P (Pack of 4) Terminal Cover 3P (Pack of 4) 25 & 32A 25 & 32A 63A 16-32A, 15.25" 63-125A, 15.75" 160 & 250A, 23.70" 3LD9221-2Aa 3LD9221-0Aa 3LD9251-0Aa a Handles Pole Pole Pole Pole Terminal Terminal Terminal Terminal (leading (leading (leading (leading ON, ON, ON, ON, and line side terminal covers are supplied as standard with 3LD2 switches. suffix 1 for a black or 3 for a red & yellow handle to the catalog number (except 3LD2244-1TL53 & 3LD2213-1TL53). Handles are IP65 rated and are also listed by UL for Type 1, 4X and 12 applications. b Add Siemens Industry, Inc. Industrial Controls Catalog lagging lagging lagging lagging 25 & 32A 63A 100 & 125A 160 & 250A OFF) OFF) OFF) OFF) c Aux. contacts break about 30 Ms before and make about 3 Ms after main switch contacts. Ratings 10A at 120V AC 6A at 240V AC 1.4A at 480V AC Product Category: PILO d Can be used as replacement handles on enclosed 3LD2 switches. mounted switches with direct mount handles are also available (3LD2330-0TK1 _b rated 160A and 3LD2430-0TK1_b rated 250). e Base 18/17 Switches Disconnect Switches Compact Non-Fusible — Rotary and Toggle Individual Components and Assemblies Recommended for Basemount. For Door mounting only, use LBRD1. Rotary and Toggle Switches Catalog Number LBR3025 LBR3025Df LBR3040g LBR3060g LBR3080g LBR3100g LBR4040 LBT3040 LBT3060 LBT3080 LBT3100 LBT4040 Switch Type Rotary Rotary Rotary Rotary Rotary Rotary Rotary Toggle Toggle Toggle Toggle Toggle No. of Poles 3 3 3 3 3 3 4 3 3 3 3 4 Ampere Rating 25 25 40 60 80 100 40 40 60 80 100 40 Max AC Volt 480 480 600 480 600 480 480 600 480 600 480 480 AC Horsepower Ratings 115V 240V 1Ø 1Ø 3Ø 3 ⁄4 2 5 3 ⁄4 2 5 2 3 71⁄2 2 5 10 3 10 20 5 15 25 2 3 71⁄2 2 3 71⁄2 2 5 10 3 10 20 5 15 25 2 3 71⁄2 480V 3Ø 10 10 20 25 40 50 20 20 25 40 50 20 600V 3Ø — — 25 — 50 — — 25 — 50 — — Standard Duty Rotary Switch Door Handles Heavy Duty Rotary Switch Door Handle LBR Type Handles Catalog Number Standard Duty LBRH2b LBRH3b LBRH4b LBRH9b LBRH10b LBRH5 LBRH6 LBRH7 LBRH8 Heavy Duty CFSH10B12 CFSH10R12 Used on Rotary Switches NEMA Type All All All All (Pistol Grip Type) All (Pistol Grip Type) 25 Amps 3-Pole, 40-60 Amps 3-Pole, 80-100 Amps 4-Pole, 40-60 Amps 1 1, 1, 1, 1, 1 1 1 1 All All 1, 3R, 12 1, 3R, 12 3R, 3R, 3R, 3R, 12, 12, 12, 12, 4X 4X 4X 4X Mounting Marking Color Cover Interlock Supplied Door Door Door Door Door Direct Direct Direct Direct ON/OFF O/I, ON/OFF O/I, ON/OFF O/I, ON/OFF O/I, ON/OFF O/I O/I O/I O/I Black Black Red/Yel Black Red/Yel Black Black Black Black No Yesa Yesa Yes Yes — — — — No Yes Yes Yes Yes Yes Yes Yes Yes O/I, ON/OFF O/I, ON/OFF Black Red/Yel Yes Yes Yes Yes Mount Mount Mount Mount Door Door Padlockable LBR Type Rotary Shafts Catalog No Length In. (mm) For Standard Duty Handles LBRS040 1.57 (40) LBRS050 1.97 (50) LBRS055 2.17 (55) LBRS080 3.15 (80) LBRS120 4.72 (120) LBRS180 7.09 (180) LBRS305 12.00 (305) For Heavy Duty Handles CFSS5200H 7.9 (200) CFSS5400H 15.7 (400) Rotary Shafts Catalog Number LBRP25 LBRP25D Auxiliary Switch Kits Used on Catalog Rotary Switch Number LBR3025 LBRA25 cd LBR3025D LBRA25D cd LBR3040, cd LBR3060LBRA1 LBR3080, cd LBR3100LBRA2 aNo Contact Arrangement 1 NO & 1 NC 1 NO & 1 NC 1 NO/1 NC with common point 1 NO/1 NC with common point cover interlock defeat mechanism provided. To eliminate cover interlock, order additional catalog number LBRDC1. bLBRH2 is IP54 rated. All others are IP65. cRatings 15.1A resistive at 250V AC max. .5A at 125V DC .25A at 250V DC .5 HP at 250V AC max. 18/18 Toggle Switch Cover Plates LBR Type Toggle Switch Cover Plate 25 Amp, 4th Pole Used on Catalog No LBR3025 LBR3025D Rotary Switch Direct Mount Handles Used on Toggle Switches LBT3040, LBT3060 LBT3080,LBT3100 LBT4040 Catalog Number LBTCP1 LBTCP2 LBTCP3 LBR Type Rotary Switch Door Mounting Kit (For use with LBRH3 & LBRH4 only) Used on Rotary Switch Catalog Number 40-100 Amps LBRD1 LBR/LBT Neutral Kit e Used with Catalog Number All dAuxiliary f Only eLug switch contacts break about 30 Ms before and make about 3 Ms after main switch contacts. wire ranges: HF63CX —(1) #14-2 AWG 60/75°C Cu only g For Product Category: HDSS Catalog Number HF63CX door mountable and for use with LBRH3 & 4 handles only. door mounting of 40–100A LBR switches use door mounting kit LBRD1 & LBRH3 or 4 handle. LBRD1 does not require shaft. Siemens Industry, Inc. Industrial Controls Catalog Switches Disconnect Switches Compact Non-Fusible — Rotary and Toggle Dimension Drawings and Wire Ranges Dimension J Minimum Deptha Switch Dimension J LBR 40-100A 3.35 (85) 3LD2 25 & 32A Front Shaft Mounted 3LD2 63 Front Shaft Mounted 3LD2 16-32A Front 4-hole Mounted 3LD2 63A Front 4-hole Mounted 3LD2 100 & 125A Front 4-hole Mounted 3.07 (78) 3.35 (85) 2.13 (54) 2.48 (63) 2.56 (65) 3LD2 25 & 32A Base w/shaft Mtg. Handle 3LD2 63A Base w/shaft Mtg. Handle 3LD2 16-32A Base w/4-hole Mtg. Handle 3LD2 63A Base w/4-hole Mtg. Handle 3LD2 100-250A Base w/4-hole Mtg. Handle 6.46 (164) 6.77 (172) 5.59 (142) 5.99 (152) 6.07 (154) J a C A E F D 0.16 in. (4 mm) G B a LBR 3025 H Wire Ranges 60/75°C Cu only 0.31 in. (8 mm) 25 Amps LBR (1) #14 - #10 AWG Solid (1) #14 - #8 AWG Stranded 40 & 60 Amps LBR & LBT (1) #14 - #10 AWG Solid (1) #14 - #4 AWG Stranded UP to (4) #12 AWG Solid Up to (3) #12 AWG Stranded Up to (6) #14 AWG Stranded Up to (4) #14 AWG Stranded with (1) #10 AWG Stranded 80 & 100 Amps LBR & LBT (1) #14 - #10 AWG Solid (1) #14 - #1 AWG Stranded (2) #6 AWG Stranded Up to (3) #8 AWG Stranded Up to (6) #10 AWG Stranded Up to (6) #12 AWG Solid (1) (1) (1) (1) (1) (1) 16A, 3LD20 25A, 3LD21 32A, 3LD22 63A, 3LD25 100, 125A, 3LD2 160, 250A, 3LD2 LBR 40-100 Amps & 3LD2 16-250A Drilling Pattern .125 (3.2) 3.00 in. (76 mm) Minimum Depth .95 (24.1) C .877 (22.5) Shaft Mounted 3LD2 Handle Cutout (4-hole pattern) 0.16 in. (4 mm) H #18-10 AWG #14-8 AWG #14-8 AWG #14-6 AWG #12-1 AWG #1-400 MCM 0.31 in. (8 mm) LBT Toggle — 40-100 Amps Dimensions Inches (mm) Switch Catalog Number A B C Rotary Rotary Rotary Rotary Rotary Rotary Front Rotary Front Rotary Front Rotary Front Mtg. Mtg. Mtg. Mtg. LBR3040 LBR3060 LBR3080 LBR3100 LBR4040 3LD20 3LD21 & 2 3LD25 3LD27 & 8 2.00 2.00 2.09 2.09 2.42 1.89 1.81 2.36 2.40 (51) (51) (53) (53) (61) (48) (46) (60) (61) 2.72 2.72 3.32 3.32 2.72 1.97 2.17 2.52 3.27 (69) (69) (84) (84) (69) (50) (55) (64) (83) 2.72 2.72 2.92 2.92 2.72 1.97 1.97 2.32 2.40 (69) (69) (74) (74) (69) (50) (50) (59) (61) 1.78 1.78 1.97 1.97 2.28 — — — — Rotary Rotary Rotary Rotary Rotary Mtg. Mtg. Mtg. Mtg. Mtg. 3LD20 3LD21 & 2 3LD25 3LD27 & 8 3LD23 & 4 1.89 1.81 2.36 2.80 4.41 (48) (46) (60) (71) (112) 1.97 2.17 2.52 3.27 5.83 (50) (55) (64) (83) (148) 2.29 2.29 2.68 2.76 4.10 (58) (58) (68) (70) (104) — — — — — LBT3040 LBT3060 LBT3080 LBT3100 LBT4040 2.00 2.00 2.09 2.09 2.42 (51) (51) (53) (53) (61) 2.72 2.72 3.32 3.32 2.72 (69) (69) (84) (84) (69) 2.75 2.75 2.90 2.90 2.75 (70) (70) (74) (74) (70) 1.78 1.78 1.97 1.97 2.28 aDepth from outside of cover to back of switch. Siemens Industry, Inc. Industrial Controls Catalog G B Type Toggle Toggle Toggle Toggle Toggle D F Switch Base Base Base Base Base A E D E (45) (45) (50) (50) (58) 2.16 2.16 2.29 2.29 2.16 — — — — F (55) (55) (58) (58) (55) — — — — — (45) (45) (50) (50) (58) 2.16 2.16 2.29 2.29 2.16 1.67 1.67 1.69 1.69 1.67 — — — — G (42) (42) (42) (42) (42) — — — — — (55) (55) (58) (58) (55) 1.67 1.67 1.69 1.69 1.67 1.50 1.50 1.66 1.66 1.50 — — — — H (38) (38) (42) (42) (38) — — — — — (42) (42) (42) (42) (42) 1.50 1.50 1.66 1.66 1.50 1.22 1.22 1.66 1.66 1.22 — — — — (31) (31) (42) (42) (31) — — — — — (38) (38) (42) (42) (38) 1.22 1.22 1.66 1.66 1.22 (31) (31) (42) (42) (31) bHandle front plate dimensions: 3LD 16-32A—2.64 inches square 3LD 63-125—3.55 inches square 18/19 Switches Disconnect Switches Type VBII (30-600A) with Flange Mounted Operating Handle Features b 30-600A, 600VAC and DC ratings b 240 & 600V AC switches are UL Recognized under file number E121152, Vol. 3 and CSA certified under file number 154852 b 600V DC Photovoltaic switches are UL Recognized under file number E335018, Vol. 3 and are rated to switch 3 separate 600V DC circuits bVisible blade quick make and break switching action VBFS361, VBLK1 & VBH1 Ordering Information 1.Determine the ratings required (amps, volts, HP, Fusible, NF), the mounting needed (Panel or Flange), and select the appropriate switch. 18/20 b Panel and Flange mounted assemblies facilite installation b Panel mounted switches are variable depth b Short circuit rating of 10,000 AIC with class H fuse, and of 200,000 AIC with class R or J fuses. PV switches are rated 10,000 AIC at 600V DC with 600V DC rated class K, J or R fuses. b Flange mounted handles rated as Type 1, 3R & 12 or 4X are padlockable in the off position with up to (3) padlocks with 5/16 hasps bMeets UL98 requirements and suitable for both main and branch circuit applications bA complete line of aux contacts are available b Load break and horsepower rated b Defeatable cover interlock standard with all handles b Meets NFPA79 requirements b Seismic qualified — complies with the 2010 California Building Code (CBC) — and with the International Building Code (IBC) — Compliance Level SDS = 1.85 g VBFS363F VBNFS365, VBLK4 & VBH2 2.For panel mounted switches with a rigid operating shaft (30-600A), order panel mounted switch, flange mounted operating handle & rigid linkage kit based on depth required. 3.For panel mounted switches with a Max-Flex operator, order panel mounted switch, Max-Flex Handle & Adapter Kit and drive cable. 4.Select accessories if required. Siemens Industry, Inc. Industrial Controls Catalog Switches • Revised • 08/05/14 Disconnect Switches Type VBII Switch, Handle and Linkage Kit Selection Switches—for Standard 600V Max AC or DC Applications Switch Ampere Rating Max. AC Voltage Rating Horsepower Rating, Switches and 3-Phased Catalog Number 240 Volts AC 480 Volts AC 600 Volts AC Standard Standard Standard Max. Fusible Panel Mounted Variable Depth Switches - 3-Polee 30 240 VBFS321 3 7 1/2 60 240 VBFS322 7 1/2 15 30 600 VBFS361 — — 60 600 VBFS362 — — 100 600 VBFS363 — — 200 600 VBFS364 — — 400 600 VBFS365 — — 600 600 VBFS366 — — Non-fusible Panel Mounted Variable Depth Switches - 3-Pole!e 30 600 VBNFS361 — 10 60 600 VBNFS362 — 20 100 600 VBNFS363 — 40 200 600 VBNFS364 — 60 400 600 VBNFS365 — 125 600 600 VBNFS366 — 200 Fusible Flange Mounted Switches - 3-Polef 30 240 VBFS321F 3 7 1/2 60 240 VBFS322F 7 1/2 15 30 600 VBFS361F — — 60 600 VBFS362F — — 100 600 VBFS363F — — 200 600 VBFS364F — — Non-fusible Flange Mounted Switches – 3-Pole 30 600 VBNFS361F — 10 60 600 VBNFS362F — 20 100 600 VBNFS363F — 40 200 600 VBNFS364F — 60 Max. Max. 600 Volts DC (max)d — — 5 15 25 50 100 150 — — 15 30 60 125 250 400 — — 7 1/2 15 30 60 125 200 — — 20 50 75 150 350 500 —a —b 15 c 30 c 50 c 50 — — — — — — — — 20 50 75 125 250 400 — — — — — — 30 60 100 150 300 500 15 c 30 c 50 c 50 — — — — 5 15 50 100 — — 15 30 60 125 — — 7 1/2 15 30 60 — — 20 50 75 150 —a —b 15 c 30 c 50 c 50 — — — — 20 50 75 125 — — — — 30 60 100 150 15 30 50 50 c c c Note: F usible switches include fuse provisions for Class H Fuses. The load base can be moved to pre-drilled holes for Class J Fuses on all 600V switches. If Class R Fuses are required, add a Class R Fuse Clip Kit. Switches—for Photovoltaic Applications, 600VDC Max. (for use in negative ground systems only) Switch Ampere Rating Catalog Number Rated Isc per NEC Article 690 Fusible Panel Mounted Variable Depth Switches—3 Pole 30 60 100 VBFS361PV VBFS362PV VBFS363PV 19.2A 38.4A 64.0A Non-Fusible Panel Mounted Variable Depth Switches—3 Pole 30 60 100 VBNFS361PV VBNFS362PV VBNFS363PV 24.0A 48.0A 80.0A Fusible Flange Mounted Variable Depth Switches—3 Pole (Includes Type 1, 3R and 12 Rated Operating Handle) 30 60 100 VBFS361FPV VBFS362FPV VBFS363FPV 19.2A 38.4A 64.0A Cable Kit For use with 30-200A panel mounted switches and Max-Flex handle and adapter kit . Catalog Number Description FHOEC036 FHOEC048 36" long drive cable 48" long drive cable Max-FlexTM Handle and Adapter Kit (Type 1, 12, 3R & 4X) Use with 30-200A panel mounted switches and cable kit . Catalog Number Operating Handle Description Plastic Handles VBHM1 30-200A Type 1, 3R, 12 and 4X Metal Handles VBHM2 VBHM2X 30-200A Type 1, 3R and 12 30-200A Type 4X Non-Fusible Flange Mounted Variable Depth Switches—3 Pole (Includes Type 1, 3R and 12 Rated Operating Handle) 30 60 100 VBNFS361FPV VBNFS362FPV VBNFS363FPV 24.0A 48.0A 80.0A Rated 5 HP at 250V DC. Rated 10 HP at 250V DC. DC & 600V DC horsepower rating shown requires (2) poles to be connected in series. d Std. - applies when non-time delay fuses are used. Max. - applies when time delay fuses are used. e Includes line base, load base, operating mechanism and line and load lugs. Order operating handle and linkage kits from tables on pages 18/21 or 18/22. f Includes line base, load base, operating mechanism line and load lugs plastic operating handle and required linkage. g All photovoltaic switches are rated to be used with 3 separate 600V DC circuits. hFusible switches accept Class K or R fuses as standard and Class J fuses by relocating the load base. Rated 250V DC max and 50HP at 250V DC. a b c 600V Siemens Industry, Inc. Industrial Controls Catalog VBNFS361, VBHM1 & FHOEC036 18/21 Switches Disconnect Switches Accessories Type VBII Flange Mounted Operating Handles Rigid Linkage Kits NEW For use with Panel Mounted Switches. Plastic handle is included with Flange Mounted Switches as standard. For use with Panel Mounted Switches. Not required for Flange Mounted Switches. They provide two point control power take-off capability and are normally used on two poles on the line side when it is required to have control power available when the switch is in the OFF position. They provide a mounting provision for standard ¼” quick connect terminal. Installed in the line or load side. 30A VBII switches have lugs UL listed to accept (2) wires per pole as standard so a 30A kit is not required. Catalog Number Operating Handle Description Plastic Handles VBH1 VBH14X 30-200A Type 1, 3R & 12 30-200A Type 4X Metal Handles VBH112 VBH14 VBH2 VBH2R VBH24X 30-200A Type 1, 3R & 12 30-200A Type 4X 400A Type 1 & 12 400 & 600A Type 1, 3R & 12 400 & 600A Type 4X Catalog Number VBLK1 VBLK2 VBLK3 VBLK4 Switch Ampere Rating Enclosure Depth Min Max. 30-200 30-200 6.94 6.94 6.94 19.0 400 & 600 400 & 600 9.00 9.00 8.75 19.0 Quick Connects Catalog Number Description HCQ62 60A 2 wire quick connect kit HCQ63 HCQ64 100A 2 wire quick connect kit 200A 2 wire quick connect kit HT63 Class T Fuse Adapter Kits HR612 Class R Fuse Clip Kits These kits prevent the installation of Class H and K fuses (one kit required per switch). Class R Fuse Clip Kits 100-600A fusible switches are field convertible to accept Class T fuses. 400-600A switches are field convertible to accept Class T fuses by moving the load base to a pre-drilled T fuse position. Class T Fuse Adapter Kits Catalog Number Description Catalog Number Description HT23 100A, 240V Kit HR21 30A, 240V Kit (HD only) HT63 100A, 600V Kit HR612 30A, 600V Kit/60A, 240V Kit HT24 200A, 240V Kit HR62 60A, 600V Kit HT64s 200A, 600V Kit HR63 100A Kit HR64 200A Kit HR656 400A/600A Kit Internal Door Latch Kits For use with enclosures with door mounted latching bar. Required when a flange mounted switch is mounted in a Hoffmann or Rittal enclosure provided with an AB cutout. Class J Fuse Provisions All 30-600A, 600V fusible switches are field convertible to accept Class J fuses by moving the load base to a pre-drilled J fuse position. HN612 Neutral Kits Standard Neutral Kits can be field installed in 30-100A switches. Neutral Kits Switch Ampere Rating 30A 600V, 60A 240V Kit Catalog Number HN612 60A, 600V & 100A HN623 200% Neutral Kits Allows viewing of visible blades and of indicating fuses through 200A. UL listed 200% Neutrals are available on 60 & 100A switches. They are typically used with non-linear transformers or where increased neutral ampacity/lug capacity is required. Catalog Number Description 200% Neutral Kits DKR2 2 point (for use with enclosures less than 40" high) VBWK1 30A Window Kit VBWK2 60 & 100A Window Kit DKR3 3 point (for use with enclosures 40" or larger in height) VBWK3 200-600A Window Kit Catalog Number Description s Built to order. Allow 6–8 weeks for delivery. Dimensions (min. & max.) from enclosure mounting pan to outside surface of enclosure handle mounting flange. 18/22 Window Kits (Type 1, 12, 3R and 4x) 7.12 for 200A switches. One kit per pole required. Product Category: HDSS Switch Ampere Rating 60 & 100A Kit Catalog Wire Range Line & Number Load Lugs (Cu/Al) HN263 (2) #14-1/0 AWG UL approved (not CSA certified). Siemens Industry, Inc. Industrial Controls Catalog Switches Disconnect Switches Type VBII Accessories Auxiliary Contacts The auxiliary contacts are available in 1 normally open and 1 normally closed or 2 normally open and 2 normally closed configurations. Siemens offers a PLC Auxiliary Switch (30-200A) that has very low resistance for low voltage and current typical in PLC circuits. All auxiliary contacts make after and break before main switch contacts. Switch Ampere Rating HA161234 Aux. Switch Catalog Number Kit Ampere Rating Kit Horsepower Rating 125V AC 250V AC 28V DC 125V AC 250V AC 28V DC Max. Max. Max. Max. Max. Max. With 1 NO & 1 NC Isolated Contacts 30-200 HA161234 10 10 — 1/2 3/4 — 400-600 HA165678 10 10 — 1/2 3/4 — With 2 NO & 2 NC Isolated Contacts 30-200 HA261234 10 10 7 1/2 3/4 — 400-600 HA265678 10 10 7 1/2 3/4 — Low Current PLC Type with 1 NO & 1 NC Gold Plated Contacts HA261234 30-200 HA361234 10 10 — 1/2 3/4 — 400-600 HA365678 10 10 — 1/2 3/4 — Fuse Puller Kits Fuse Puller Kits are field installable in 30-100A Type VBII Heavy Duty Switches (one kit required per 3-pole switch). HP61 Switch Ampere Rating 030 Fuse Puller Kit Catalog Number HP61 060 HP62s 100 HP63s Copper Lug Kits All switches are UL approved to accept field installed copper lug kits. Switch Ampere Rating 30–60 HLC612 Copper Lug Catalog Number Description HLC612 (9) Lugs/Kit #14-4 AWG Cu 100 HLC63s (9) Lugs/Kit #14-1/0 AWG Cu 200 HLC64s (9) Lugs/Kit #6 AWG-300 Kcmil Cu 400–600A HLC65678 (1) Lugs/Kit #1/0 AWG-600 Kcmil Cu Equipment Ground Kits Equipment Ground Lug Kits are available for all switches. Switch Ampere Rating 30–200 Catalog Number HG61234 400 & 600 HG656 NEW Number of Terminals 2 4 Wire Range Per Terminal (Cu/Al) #14-4 AWG #6 AWG-250 Kcmil Internal Shield Kits (for fusible switches) Kits provide a “skirt” that encloses the VBII switch and also a clear plastic inner door to prevent accidental contact with live parts. Test probe holes are provided and fuses can be replaced without removal of kit. HSK61 Switch Ampere Rating Shield Kit Catalog Number 30A HSK61 60-100A HSK623 200A HSK64 s Built to order. Allow 6–8 weeks for delivery. Siemens Industry, Inc. Industrial Controls Catalog Product Category: HDSS 18/23 Switches Disconnect Switches Type VBII Lug Wire Ranges & Dimensions Lugs 30 & 60A switches are suitable for use with 60° or 75°C wire. 100–600A switches are suitable for use with 75°C rated wire. All switches are supplied with factory installed line and load lugs. Wire Ranges (Line, Load and Standard Neutral) Switch Ampere Rating UL Approved Wire Range Lug Wire Range 30 #14-6 AWG (Cu/AI) #14-2 AWG (Cu/Al) 60 #14-2 AWG (Cu/AI) #14-2 AWG (Cu/Al) 100 #14-1/0 AWG (Cu/Al) #14-1/0 AWG (Cu/Al) 200 #6 AWG-300 Kcmil (Cu/Al) #6 AWG-300 Kcmil (Cu/Al) 400 1/0 AWG-750 Kcmil (Cu/Al) or (2) 1/0 AWG-250 Kcmil (Cu/Al) (1) 1/0 AWG-750 Kcmil (Cu/Al) or (2) 1/0 AWG-250 Kcmil (Cu/Al) 600 (2) 1/0 AWG-750 Kcmil (Cu/Al) or (4) 1/0 -250 Kcmil (Cu/Al) (2) 1/0 AWG-750 Kcmil (Cu/Al) or (4) 1/0 AWG-250 Kcmil (Cu/Al) Approximate Dimensions Mounting bracket shown with handle installed is supplied with Flange Mounted Switches only. All Panel Mounted Switches have a “L” shaped mounting pan with a line base, load base (if fusible) and mechanism installed. Catalog Number A Fusible, Panel Mounted Dimensions B Ca D (min) D (max) VBFS321 11.88 N/A 7.47 6.94 19 VBFS322 13.12 N/A 8.50 6.94 19 VBFS361, PV 11.88 N/A 7.47 6.94 19 VBFS362, PV 13.12 N/A 8.50 6.94 19 VBFS363, PV 13.12 N/A 8.50 6.94 19 VBFS364 17 N/A 12.33 7.12 19 VBFS365 26.25 N/A 16.50 8.63 19 VBFS366 26.25 N/A 16.50 8.63 19 A Non-fusible, Panel Mounted VBNFS361, PV 9.79 N/A 7.47 6.94 19 VBNFS362, PV 9.79 N/A 8.50 6.94 19 VBNFS363, PV 9.79 N/A 8.50 6.94 19 VBNFS364 10.77 N/A 12.33 7.12 19 VBNFS365 13 N/A 16.50 8.63 19 VBNFS366 13 N/A 16.50 8.63 19 Fusible, Flange Mounted VBFS321F 11.88 14.08 7.47 7.27 N/A VBFS322F 13.12 15.83 8.85 7.27 N/A VBFS361F, PV 11.88 14.08 7.47 7.27 N/A VBFS362F, PV 13.12 15.83 8.85 7.27 N/A VBFS363F, PV 13.12 15.83 8.85 7.27 N/A VBFS364F 17 18.20 12.68 7.57 N/A D C Non-fusible, Flange Mounted VBNFS361F, PV 9.79 11.78 7.47 7.27 N/A VBNFS362F, PV 9.79 11.78 8.85 7.27 N/A VBNFS363F, PV 9.79 11.78 8.85 7.27 N/A 10.77 11.97 12.68 7.57 N/A VBNFS364F a Dimension C for panel mounted switches indicates the minimum width from the left hand edge of the switch mounting pan to the right hand inside surface of the enclosure. 18/24 Siemens Industry, Inc. Industrial Controls Catalog Switches Disconnect Switches Type MCS (30-200A) — Switches, Fuse and No Fuse Kits Features b 30, 60, 100 and 200 Ampere Switches b UL Recognized (file # E121152 vol. 1 & 2) and CSA Certified b Simple Mounting — with an integral switch and over center mechanism b Horsepower & load break rated b Compact Size b Visible Blade Contacts bRugged Construction — with a short circuit current rating of 10,000 amps with Class H or 200,000 amps at 600V maximum AC, when fused with Class R or Class J fuses Type MCS Disconnect Switch with Max-Flex™ handle operator Type MCS Disconnect Switch with fixed-depth, flange-mounted handle Ordering Information 1.Select the basic switch size you need (30, 60, 100 or 200 ampere). 2. Check the switch selected against the maximum horsepower rating required for our application. “L” or “R” suffix on switch catalog numbers denotes left or right-handed mechanism drive. 3.Choose either fuse or no fuse kit from chart below. Information 4.Check “Minimum Dimensions” on page bAvailable with three operator handle options, allowing flexible placement of switch b Field Installable Auxiliary Contacts b Flexible Fuse Class Configurations b Flange mounted handles meet NFPA79 requirements Type MCS Disconnect Switch with rotary handle 18/26 for installation space requirements. 5.Select from the list of handle operators, the type which best suits your application. Handle operators can be selected from the next page. Basic Switches Switch Ampere Rating Maximum Voltage Rating Maximum Horsepower Rating, 3 Phased Catalog Number Right Hand Catalog 240 Volts AC 480 Volts AC 600 Volts AC Standard Fuse Standard Fuse Standard Fuse Time Delay Fuse 250 Volts DC (max)d Number Left Hand Time Delay Fuse Time Delay Fuse 130 600 MCS603R MCS603L 13 171⁄2 15 115 171⁄2 120 15 160 600 MCS606R MCS606L 171⁄2 15 15 130 15 150 10 100 600 MCS610R 30 25 160 30 175 20 200 600 MCS620R MCS610Ls 15 MCS620Ls 25 60 50 125 60 150 40 Fuse And No Fuse Kits (Includes load base plus line and load fuse Basic Switch Ampere Rating Switch Catalog Number 130 MCS603R or MCS603L 160 MCS606R or MCS606L 100 200 MCS610R or MCS610L MCS620R or MCS620L No Fuse Kits Kit Description No Fuse 30A, 250V 30A, 600V 60A, 250V 60A, 600V No Fuse 60A, 250V 60A, 600V 100A, 250V 100A, 600V No Fuse 100A, 250V 100A, 600V 200A, 250V 200A, 600V No Fuse 200A, 250V 200A, 600V Standard Cu Onlyb Catalog Number Catalog Number — — — — — — — — — — TMK610C — — — — TMK620Cs — — TMK606 — — — — TMK606 — — — — TMK610 — — — — TMK620 — — s Built to order. Allow 6–8 weeks for delivery. a For “copper only” connectors, order as follows: Fusible—order standard switch, standard fuse kit and copper only no fuse kit. Siemens Industry, Inc. Industrial Controls Catalog clips)a For Class H For Class J For Class R Catalog Number a — FCK203s FCK206 FCK206 FCK606 — FCK206 FCK606 OFCK661s OFCK661s — FCK610 FCK610 OFCK620 OFCK620 — FCK620 FCK620 Catalog Number a — — FCJK603 — FCJK606 — — FCJK606 OFCK661s OFCK661s — FCK610 FCK610 OFCK620 OFCK620 — FCK620 FCK620 Catalog Number — FCRK203 FCRK206 FCRK206 FCRK606 — FCRK206 FCRK606 Non-Fusible—order standard switch and copper only no fuse kit. b Includes both line and load lugs. c a Lug Wire Size #14 to #4 AWG Cu/AI #14 to #4 AWG Cu/AI c — c c c #14 to #2/0 AWG Cu/AI c — c c #6 to 300 kcmil Cu/AI c For Class R fuses order Class H kit from this table and the Class R conversion kit from the next page. ratings for time delay fuses and for 250V DC also apply to Non-fusible switches. d HP 18/25 Switches Disconnect Switches Type MCS (30-200A) Auxiliary Switch Kits Class R Fuse Conversion Kits Contact Arrangement Switch Catalog Number 1 NO/1 NC Catalog Number 2 NO/2 NC Catalog Number MCS603R MCS603L MCS606R MCS606L MCS610R MCS610L MCS620R MCS620L MCSAKR136 MCSAKL136 MCSAKR136 MCSAKL136 MCSAK116 MCSAK116 MCSAK126 MCSAK126 MCSAKR236 MCSAKL236s MCSAKR236 MCSAKL236s MCSAK216 MCSAK216 MCSAK226 MCSAK226 Fuse Clip Rating Catalog Number 100A, 600V 200A, 600V SSRK33 SSRK34 Fuse Ejector Kits Switch Catalog Number Fuse Ejector Kit Catalog Number MCS610 MCS620 FE100s FE200s Handle Operators Fixed Depth, Flange Mounted, Types 1, 3, 3R, 12 af Switch Catalog Number Complete Handle Mechanism Handle Only Switch Operator Only Catalog Number Catalog Number Catalog Number MCS603R MCS603L MCS606R MCS606L MCS610R MCS610L MCS620R MCS620L FDFS06R FDFS06L FDFS06R FDFS06L FDFS06R FDFS06L FDFS20R FDFS20L FDH10 FDH10 FDH10 FDH10 FDH10 FDH10 FDH20 FDH20 FDS06R FDS06L FDS06R FDS06L FDS06R FDS06L FDS20R FDS20L Variable Depth, Flange Mounted Max-Flex™, Types 1, 3, 3R, 12 b Switch Catalog Number Complete Handle Mechanism Handle Only Switch Operator Only Cable Only c Catalog Number Catalog Number Catalog Number Catalog Number MCS603R MCS603L MCS606R MCS606L MCS610R MCS610L MCS620R MCS620L FHOS06036R FHOS06036L FHOS06036R FHOS06036L FHOS06036R FHOS06036L FHOS20036R FHOS20036L FHOHS FHOHS FHOHS FHOHS FHOHS FHOHS FHOHS FHOHS FHOS06R FHOS06L FHOS06R FHOS06L FHOS06R FHOS06L FHOS20R FHOS20L FHOEC036 FHOEC036 FHOEC036 FHOEC036 FHOEC036 FHOEC036 FHOJC036 FHOJC036 Variable Depth Rotary, Through-The-Door-Mounted, Types 1, 12 de Variable Depth MCS603R MCS606R MCS610R MCS620R Shaft Only Variable Depth CRHOS06VD CRHOS06VD CRHOS06VD CRHOS20VD CRHOH CRHOH CRHOH RHOH RHOS06 RHOS06 RHOS06 RHOS20 RHOSVD RHOSVD RHOSVD RHOSVD MCS Disconnect Switch Panel Space Requirements Panel Space Requirements Minimum Dimensions (inches*) Switch Catalog Number MCS603 MCS606 MCS610 MCS620 s Built to order. Allow 6–8 weeks for delivery. a For Type 4 and 4X applications, order handle only Catalog Number 100A - FDH104 200A - FDH204 b For Type 4 and 4X applications, order handle only Catalog Number FHOHS4 18/26 Size 30A/240V 30A/600V 30A/600V 60A/240V 60A/600V 60A/600V 100A/240V 100A/600V 100A/600V 200A/240V 200A/600V 200A/600V “A” 6.13 6.13 6.13 6.13 6.13 6.13 7.38 7.38 7.38 9.17 9.17 9.17 “B” “C” 5.52 8.11 5.52 10.11 5.52 8.48 5.52 7.86 5.52 10.38 5.52 8.35 7.59 11.85 7.59 13.85 7.59 10.6 9.00 14.7 9.00 17.2 9.00 13.32 c Standard Fuse Class H, K, R H, K, R J H, K, R H, K, R J H, K, R H, K, R J H, K, R H, K, R J cable length is 36 inches. Alternate lengths are available as follows: Length Amps Cat. No. 48" 30–100 FHOEC048 60" 30–100 FHOEC060 48" 200 FHOJC048 60" 200 FHOJC060 Product Category: HDSS “A” – Dimension is measured from each cross bail pin. “B” – Dimension is measured from line side barrier to load side barrier. “C” – Dimension is measured from line side terminal of switch to load side terminal of fuse load base. d For Type 4 and 4X applications, order handle only Catalog Number RHOH4 e For Type 3 and 3R applications, order handle only Catalog Number RHOH f Min. enclosure depth from mounting pan to handle mounting surfaces: 30-100A 6.44 Inches 200A 10.93 Inches *For millimeters multiply inches by 25.4. Siemens Industry, Inc. Industrial Controls Catalog Switches • Revised • 04/30/15 Disconnect Switches Type CFS Compact Fusible Switches Features n30 - 800A ratings nUL Listed under file #E121152 & CSA Certified under file #222227 nDoor mounted rotary handles with defeatable cover interlock nMeets UL requirements for both main and branch circuit applications nCompact size n100kA with Class CC fuses or up to 200kA with Class J fuses nLoad break and horsepower rated nQuick make and break operation nAll handles are padlockable with up to (3) padlocks with 5/16” hasps in the OFF position nCatalog number CFS361C5, CFS361J5 and CNFS361 can be DIN-rail mounted and can be either front or side operated with standard rotary handles. nAll CFS part numbers ending in N can be either front or side operated with standard rotary handles. nHandles are available in Type 1, 3R, 4/4X & 12 ratings nNFPA 79 field installed kits are available n30-400A, 200kA switches are provided with quick connect terminal provisions for voltage sensing or for 10A max. control circuits nFusible switches, 3-pole 600V AC Max. 30-100A & 600800A switches are also rated 250V DC Max when poles are field connected in series. Switch Shaft Handle Lugs/Accessories CFS363JN with (2) CFSAUX1NO CFSS10200HN CFSH10BL12N CFSL200 Ordering information 1. Select the panel mounted switch required based on Ampere, HP and AIC requirements. Switches with a right hand mechanism are standard, 30-100A switches with a left hand mechanism are available. 2. Select handle based on environmental rating required. 3. Select operating shaft (200 or 400mm in length). For enclosure depths of 9.0” or less from panel mounting surface to inside of door use 200mm long shafts. For deeper enclosures use 400mm long shafts. 30A 100kA switches can be used in 10” deep enclosures (panel to inside of door) with 200mm shaft and CFSH5N handles. Note: Be sure to check shaft and handle compatibility with the switch selected by using information provided in the selection tables. 4.Line & load lugs are provided as standard on 30-100A switches. Terminal kits are available for 200-800A switches if needed. Siemens Industry, Inc. Industrial Controls Catalog 5. Auxiliary contact are available if needed as follows. A. 30A switch CFS361C5 and non-fusible 30A switch CNFS361 will accept up to (4) aux contacts B. 30A switch CFS361J5 will accept up to (2) aux contacts without an aux contact holder. If more than (2) aux contacts are required order aux contacts PLUS aux contact holder kit CFSAUXH1. All other switches will accept up to (4) aux contacts. 6. If non-fusible switch is required order a shorting bar for 60-600A switches or catalog number CNFS361 for 30A. 7. 30-100A switches are designed to prevent inadvertent contact with live parts and shields are not required. 200 & 400A switches are not supplied with terminal shields. They are available as field installed kits for both line and load terminals. 400-800A switches are supplied as standard with line shields and terminal shroud kits are available for the load side. 18/27 Switches Disconnect Switches Type CFS Compact Fusible Switches Fusible switches, 3-pole 600V AC Max. 30-100A & 600-800A switches are also rated 250V DC Max when poles are field connected in seriese Switch ampere rating Fuse provisions provided Catalog number Max horsepower ratings 240V 3Ø AC 480V 3Ø AC 600V 3Ø AC 250V DC AC short circuit rating Standard – with right hand mounted mechanism 30a 30a 30a 30a CFS361C5 CFS361J5 CFS361JN CNFS361hk Class CC Class J Class J None 7.5 7.5 7.5 7.5 15 15 15 15 20 20 20 20 5c 5c 5c 5c 100kA 100kA 200kA 65kA 60a CFS362JN1 Class J 15 30 50 10c 100kA 60a 100a 200b 400b 600b CFS362JN CFS363JN CFS364JNd CFS365JNd CFS366Jij Class J 15 30 60 125 200 30 60 125 250 400 50 75 150 350 500 10c 20c – – – 200kA 800b CFS367Lij Class L 200 400 500 – 200kA 15 30 60 20 50 75 5c 10c 20c 200kA CFS361J5 Optional – with left hand mounted mechanismd 30a 60a 100a CFS361JLN CFS362JLN CFS363JLN Class J 7.5 15 30 Operating shafts for 30-400A switchese Catalog number Shaft length in. (mm) CFSS5200N 7.9 (200) CFSS5400N 15.7 (400) CFSS5200HN 7.9 (200) CFSS5400HN 15.7 (400) CFSS10200HN 7.9 (200) CFSS10400HN 15.7 (400) Switch & handle compatibility 5mm x 5mm for use with CFS361C5, CFS361J5 &CNFS361 switches & with “CFSH5” handles only 5mm x 5mm for use with all ”CFSH10” handles & with CFS361C5, CFS361J5 & CNFS361 switches only 10mm x 10mm for use with all “CFSH10” handles & with all 30-400A switches except CFS361C5, CFS361J5 & CNFS361 CFSS5400N Compact rotary operating handles – door mounted (for use with CFS361C5, CFS3361J5 & CNFS361 switches only)f Catalog number Color UL Type Operating shaft compatibility CFSH5B12N CFSH5R12N CFSH5B4N CFSH5R4N Blue & Black Yellow & Red Blue & Black Yellow & Red 1, 3R & 12 CFSS5200N or CFSS5400N 1, 3R, 12 & 4/4X Rotary operating handles - door mounted (for use with CFSS5200HN, CFSS5400HN, CFSS10200HN & CFSS10400HN) Catalog number Color Description Blue & Black Yellow & Red Blue & Black Yellow & Red Heavy duty pistol grip (2.75” long for use with 30A switches & CFS362JN1) Type 1, 3R & 12g CFSH10B12N CFSH10R12N CFSH10BL12N CFSH10RL12N CFSH5B12N Heavy duty pistol grip (4.92” long for 30-400A switches) Type 1, 3R, 4/4X & 12g CFSH10B4N CFSH10R4N CFSH10BL4N CFSH10RL4N aLine Blue & Black Yellow & Red Blue & Black Yellow & Red Heavy duty pistol grip (2.75” long for use with 30A switches & CFS362JN1) Heavy duty pistol grip (4.92” long for 30-400A switches) and load lugs included. and load lugs are not included. Order from table on next page if required. cDC HP rating shown requires (3) poles to be connected in series. bLine 18/28 dCFS364JN & CFS365JN can be rotated 180º for left hand operation as standard. numbers CFS361C5, CFS361J5 & CNFS361 accept 5mm x 5mm operating shafts. All other 30-400A switches accept 10mm x 10mm operating shafts. eCatalog fCompact pistol grip design (2.75” long) with defeatable cover interlock. Cover can be opened when handle is padlocked in the OFF position. gDefeatable cover interlock provided. Cover cannot be opened when handle is padlocked in the OFF position. hCatalog number CNFS361 is a non-fusible switch. i4 pole 600 & 800A switches, CFS466J & CFS467L are also available. jCFS366J and CFS367L are rated 250 & 600V DC when (2) poles are connected in series. kCNFS361 is rated 65kA when protected by Class J or CC 30A max. fuses. Siemens Industry, Inc. Industrial Controls Catalog Switches Disconnect Switches Type CFS Compact Fusible Switches 600 & 800A rotary operating handles - door mounted (8.27” long)g Catalog number Color UL Type CFSH12BL12 CFSH12RL12 CFSH12BL4 CFSH12RL4 Blue & Black Yellow & Red Blue & Black Yellow & Red 1, 1, 1, 1, 3R & 12 3R & 12 3R, 12 & 4/4X 3R, 12 & 4/4X 600 & 800A operating shafts (cross section 12 x 12 mm) Catalog number Shaft length in. (mm) Enclosure depth (switch mounting surface to door OD) CFSS12200H CFSS12400H 12.59 (320) 15.75 (400) 10.43 – 16.68 in. 10.43 – 19.84 in. Type CFS fusible switch accessories Catalog number Terminals CFSL200 & 400 Description a CFSL200 CFSL400N CFSL400 200A lug kit (6 lugs per kit) (1)#6-3/0 400A lug kit (6 lugs per kit) (1)#2-600kcmil (for CFS365JN only) 600-800A lug kit (6 lugs per kit) (2)#2-600kcmil Shorting bars (no fuse kits) CFSSB60 CFSSB100 CFSSB200 CFSSB400 CFSSB680 60A shorting bar kit (3 links per kit) 100A shorting bar kit (3 links per kit) 200A shorting bar kit (3 links per kit) 400A shorting bar kit (3 links per kit) 600 & 800A shorting bar kit (1 link per kit) Auxiliary contacts (NEMA ratings AC A600 DC N600) CFSAUXH1b CFSAUX1NO CFSAUX1NC CFS11AUX CFS22AUX Aux contact holder (CFS361J5, CFS361C5 & CNFS361) Aux contact 1 NO (30-800A Sws) Aux contact 1 NC (30-800A Sws) 1NO, 1NC aux contact kit (side mount for 200kA switches) 2NO, 2NC aux contact kit (side mount for 200kA switches) CFSAUX1NC Terminal shrouds (line or load) CFSTS200Nh CFSTS400Nh CFSTS680f CFSTS6804f 200A shroud kit (line or load 3-pole kit) 400A shroud kit (line or load 3-pole kit for CFS365JN only) 600/800A 3-pole shroud kit 600/800A 4-pole shroud kit 30A compact switch kits CFSPLK CFSH5CDM CFSH5JDM Shaft padlocking kit for 30A compact switch when door is openc Direct mount handle kit for CFS361C5 & CNFS361 Direct mount handle kit for CFS361J5 NFPA 79 kits (if auxiliary contacts are needed, see table on page 7) Kits provide an operating shaft suitable for use with all heavy duty handles (not for use with CFSH5 handles). Kits also provide an internal operating handle and an internal OFF padlocking provision. CFSNFPA1d For use with CFS361C5, CFS361J5 & CNFS361 CFSNFPA2Ne For use with CFS361JN, CFS361CN, CFS362JN1, CFS362JN, CFS363JN & CFS364JN For use with CFS365JN only CFSNFPA3Ne aSupplied as standard on 30-100A switches and CNFS361 will accept (4) aux contacts without an aux contact holder. CFS361J5 will accept (2) aux contacts without an aux contact holder. bCFS361C5 Siemens Industry, Inc. Industrial Controls Catalog cSupplied as standard on all but 30A, 65kA & 100kA compact switches. d12.6 in. (320 mm) long operating shaft included e12.7 in. (323 mm) long operating shaft included fLine side terminal shrouds supplied with switch CFSSB100 - CFSSB400 gDefeatable cover interlock included. Cover cannot be opened when the handle is padlocked in the OFF position. hNeither line or load terminal shrouds are supplied as standard with new style 200 & 400A switches. 18/29 Switches Disconnect Switches Type CFS Compact Fusible Switches UL & CSA technical characteristics and panel space requirements Catalog number CFS361C5 CFS361J5 CFS361JN CFS361JLN CNFS361 CFS362JN1 CFS362JN CFS362JLN CFS363JN CFS363JLN CFS364JN CFS365JN CFS366J CFS466J CFS367L CFS467L Amps Fuse Class AC short circuit Electrical rating endurance Mechanical endurance 30 30 30 30 30 60 60 60 100 100 200 400 600 600 800 800 CC J J J None J J J J J J J J J L L 100kA 100kA 200kA 200kA 65kAb 100kA 200kA 200kA 200kA 200kA 200kA 200kA 200kA 200kA 200kA 200kA 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 8000 6000 5000 5000 3500 3500 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 1000 1000 1000 500 500 Panel space requirements - in. (mm) Height Width Deptha 4.56 (116) 4.56 (116) 5.35 (136) 5.35 (136) 4.56 (116) 5.35 (136) 7.32 (186) 7.32 (186) 7.32 (186) 7.32 (186) 11.46 (291) 15.35 (390) 11.81 (300) 11.81 (300) 11.81 (300) 11.81 (300) 3.78 (96) 4.15 (105) 5.89 (150) 5.89 (150) 3.78 (96) 5.89 (150) 5.89 (150) 5.89 (150) 5.89 (150) 5.89 (150) 7.72 (196) 10.19 (259) 14.33 (364) 18.03 (458) 14.33 (364) 18.03 (458) 6.00 (152) 6.00 (152) 6.00 (152) 6.00 (152) 6.00 (152) 6.00 (152) 6.00 (152) 6.00 (152) 6.00 (152) 6.00 (152) 6.00 (152) 8.00 (203) 11 (280) 11 (280) 11 (280) 11 (280) Wire ranges line & load lugs Switch Amperage Rating UL approved wire size (75º C) CFS361J5 30 (1)#14-10 CFS361C5 30 (1)#14-10 CNFS361 30 (1)#14-10 CFS361JN 30 (1)#14-6 CFS362JN1 60 (1)#14-6 CFS362JN 60 (1)#12-1 CFS363JN 100 (1)#12-1 CFS364JN 200 (1)#3/0 CFS365JN 400 (1)600MCM CFS366J 600 (2)350 MCM CFS367L 800 (2)600 MCM Auxiliary contact capability when an NFPA79 kit is used Switch NFPA79 kit Aux contacts that can be installed CNFS361 CFS361C5 CFSNFPA1 (2) Total, CFSAUX1NO or CFSAUX1NC CFSNFPA2N (2) Total, CFSAUX1NO or CFSAUX1NCc CFSNFPA3N (2) Total, CFSAUX1NO or CFSAUX1NCc CFS361J5 CFS361JN CFS362JN1 CFS362JN CFS363JN CFS364JN CFS365JN (1) CFSAUX1NO or (1) CFSAUX1NC aMinimum dimensions from mounting surface to inside of cover. Dimensions shown can be decreased if aux contacts are not required. bCNFS361 is rated 65kA when protected by 30A max. Class J or CC fuses. cFor additional auxiliary contacts use side mounted CFS11AUX or CFS22AUX. 18/30 Siemens Industry, Inc. Industrial Controls Catalog