RFB Series Aluminum Electrolytic Capacitors (High R.C., Long Life) MERITEK FEATURES Low impedance and long life withstanding 10000 hours load life. Suitable for electronic ballast, adaptor and switching power. SPECIFICATIONS Item Characteristic Operating Temp Range - 40 ~ +105C Rated Working Voltage 6.3 ~ 100VDC Capacitance Tolerance (120Hz 20C) 20%(M) I 0.01CV or 3(uA) Leakage Current I : Leakage Current (A) C : Rated Capacitance(F) V : Working Voltage (V) (20C) ＊Whichever is greater after 3 minutes Surge Voltage (20C) W.V. 6.3 10 16 25 35 50 63 100 S.V. 8 13 20 32 44 63 79 125 25 35 50 63 100 0.14 0.12 0.10 0.09 0.08 Dissipation Factor ( tan ) Add 0.02 per 1000uF for more than 1000uF (120Hz 20C) W.V. 6.3 10 16 tan Low Temperature Stability 0.19 0.16 Impedance ratio at 120Hz Rated Voltage (V) Load Life 0.22 6.3 10 16 25~100 -25C / +20C 4 3 2 2 -40C / +20C 8 6 4 3 After application of W.V. and +105C ripple current value, the capacitor shall meet the following limits. ( DC + ripple peak voltage rated working voltage ) Rated Voltage (V) 6.3~10 16~100 D≤6.3mm 4000hrs, D8~10mm 6000hrs, D≤6.3mm 5000hrs, D8~10mm 7000hrs, D≥12.5mm 8000hrs D≥12.5mm 10000hrs Life Time Capacitance Change 25% of initial value. Shelf Life Dissipation Factor 200% of initial specified value Leakage Current initial specified value At +105C no voltage application after 1000 hours, the capacitor shall meet the limits for load life characteristics. ( with voltage treatment ) PART NUMBER SYSTEM DIMENSIONS (mm) RFB 63V 101 M TA 10x16 Meritek Series Rated Voltage Rated Capacitance Express in micro farad(uF), First two digits are significant figures, Third digit denotes number of zeros. ‘R’ denotes decimal point for values less than 10uF Tolerance M - 20% Package Code TA Tape & Ammo TR Tape & Reel Blank Case size – (D) Diameter x (L) Length in mm (Optional) D F d a 5 2.0 0.5 1.5 6.3 2.5 0.5 1.5 8 3.5 0.6 1.5 10 5.0 0.6 1.5 12.5 5.0 0.6 1.5 16 7.5 0.8 1.5 18 7.5 0.8 1.5 Rev. 7a RFB Series Aluminum Electrolytic Capacitors (High R.C., Long Life) MERITEK RIPPLE CURRENT COEFFICIENTS Coefficient Frequency(Hz) 0.47~10uF 22~33uF 47~330uF 470~1000uF 2200~15000uF 120 0.42 0.55 0.70 0.75 0.80 1k 0.60 0.75 0.85 0.90 0.95 ≥100k 1.00 1.00 1.00 1.00 1.00 10k 0.80 0.90 0.95 0.98 1.00 Temperature(C) ≤65 85 105 Multiplier 2.12 1.69 1.00 CASE SIZE & MAX RIPPLE CURRENT V Cap. (uF) Item 47 100 220 330 470 1000 2200 3300 4700 6800 10000 15000 6.3 IMP DxL 5x11 6.3x11 6.3x11 8x11.5 10x12.5 12.5x20 12.5x20 16x25 16x25 16x31.5 18x35.5 20°C 10 IMP -10°C 0.595 0.307 0.246 0.178 0.066 0.038 0.032 0.027 0.024 0.021 0.020 V Cap. (uF) Item 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 Case size Max. impedance Max. ripple current 1.784 0.922 0.737 0.534 0.199 0.113 0.095 0.080 0.071 0.064 0.061 R.C. 200 340 410 540 920 1660 1910 2660 2920 3450 4130 DxL 5x11 6.3x11 8x11.5 8x11.5 10x16 12.5x20 12.5x25 16x25 16x31.5 18x35.5 20°C 0.482 0.249 0.169 0.138 0.063 0.036 0.030 0.025 0.023 0.020 25 IMP DxL 5x11 5x11 6.3x11 8x11.5 10x12.5 10x16 12.5x20 16x25 16x31.5 18x35.5 20°C 0.672 0.539 0.348 0.180 0.108 0.088 0.057 0.032 0.027 0.023 -10°C 1.446 0.747 0.507 0.415 0.189 0.108 0.090 0.076 0.068 0.061 R.C. 210 350 500 560 1070 1720 2170 2730 3300 3940 DxL 5x11 6.3x11 8x11.5 8x11.5 10x12.5 10x20 12.5x25 16x25 16x31.5 18x35.5 35 IMP -10°C 2.015 1.616 1.045 0.540 0.324 0.265 0.171 0.097 0.081 0.069 R.C. 150 170 280 480 700 860 1580 2540 3180 3880 DxL 5x11 6.3x11 8x11.5 10x12.5 10x16 10x20 12.5x25 16x31.5 18x35.5 20°C 0.635 0.510 0.329 0.128 0.102 0.084 0.054 0.031 0.026 -10°C 1.905 1.529 0.988 0.383 0.306 0.251 0.162 0.092 0.077 R.C. 160 210 370 640 870 1070 1940 3070 3870 DxL 5x11 5x11 5x11 5x11 5x11 5x11 5x11 6.3x11 6.3x11 8x14 10x16 10x20 12.5x20 16x25 18x35.5 : DxL :Ω : mA(rms) 105C 16 IMP 20°C -10°C (mm) 100kHz 100kHz 0.568 0.367 0.190 0.152 0.093 0.060 0.034 0.029 0.024 0.022 1.703 1.101 0.569 0.455 0.279 0.180 0.103 0.086 0.073 0.065 150 250 430 520 690 1230 1960 2570 3100 3800 50 IMP 20°C -10°C R.C. 5.658 3.989 2.417 2.014 1.697 1.330 0.725 0.564 0.453 0.292 0.113 0.091 0.074 0.048 0.027 25 36 55 65 80 110 140 200 230 420 760 1020 1290 2390 3650 16.973 11.966 7.252 6.043 5.092 3.989 2.176 1.692 1.358 0.877 0.340 0.272 0.223 0.144 0.082 R.C. Rev. 7a RFB Series Aluminum Electrolytic Capacitors (High R.C., Long Life) MERITEK CASE SIZE & MAX RIPPLE CURRENT Case size Max. impedance Max. ripple current V Cap. (uF) Item DxL 0.47 1.0 2.2 3.3 4.7 10 5x11 22 6.3x11 33 8x11.5 47 8x11.5 100 10x16 220 10x25 330 12.5x25 470 12.5x30 1000 16x35.5 63 IMP 20°C 1.246 0.679 0.528 0.424 0.192 0.099 0.079 0.065 0.042 -10°C 3.737 2.038 1.585 1.272 0.575 0.297 0.238 0.195 0.126 R.C. 120 180 250 280 530 960 1330 1610 2900 DxL 5x11 5x11 5x11 5x11 5x11 6.3x11 8x11.5 10x12.5 10x16 12.5x20 16x25 16x25 : DxL :Ω : mA(rms) 105C 100 IMP 20°C -10°C (mm) 100kHz 100kHz 5.301 3.737 2.265 1.887 1.590 1.246 0.679 0.317 0.254 0.164 0.085 0.068 26 37 55 65 80 130 190 270 350 640 1200 1470 15.902 11.211 6.794 5.662 4.771 3.737 2.038 0.951 0.763 0.493 0.255 0.204 R.C. Rev. 7a RFB Series Aluminum Electrolytic Capacitors (High R.C., Long Life) MERITEK TAPING SPECIFICATION Lead taping is designed for automatic insertion equipment. Capacitors with case size of 18mm x 35.5mm or smaller are available in taping type. DIMENSIONS (Ø4~ Ø10) Item Symbol Case Size 4x5 5 x 5 6.3x5 8 x 5 4x7 5 x 7 6.3x7 8 x 7 5 x 11 6.3x11 8 x 11.5 10x12.5 10x16 0.45 0.5 10x18 10x20 Tolerance Lead wire diameter d Body height A Intervals of bodies P 12.7 ±1.0 Intervals of punched holes P0 12.7 ±0.2 6.0 8.0 12.5 13 14 0.6 ±0.05 17.5 19.5 21.5 MAX 3.85 Distance between holes and lead wire P1 5.35 5.1 5.1 5.6 Distance between holes and bodies 5.35 5.1 5.1 5.35 5.1 5.1 5.6 ±0.7 5.1 5.35 5.1 4.6 5.35 5.1 P2 F 6.35 2.0 2.5 2.5 2.0 2.5 2.5 Fig 1. Fig 4. Fig 2. Fig 3. 4.6 ±1.0 Fig 1. Fig 4. 5.0 Distance between lead and lead Remark +0.8 -0.2 2.5 Fig 2. F1:5.0 +0.5 -1.0 1.5 2.0 2.5 2.5 1.5 Fig 3. F1:5.0 2.0 2.5 3.5 2.0 2.5 3.5 +0.5 -1.0 Base tape width W W0 18.0 ±0.5 12.5 MIN Deviation between holes and base tape W1 9.0 ±0.5 Deviation between adhesive and base tape W2 1.5 MAX Adhesive tape width 17.5 18.5 20.0 17.5 18.5 18.5 18.5 Distance between body bottom and tape center H Lead wire clinched height H0 Distance between body top and tape center H1 Punched hole diameter D0 4.0 ±0.3 Length of not good lead slit L 11.0 MAX Base and adhesive tape thickness t 0.6 ±0.3 Deviation of body alignment ∆h 0 ±2.0 Deviation of body alignment ∆h1 0 ±1.0 ±0.5 16.0 24.5 Fig 1. Fig 4. Fig 2. Fig 3. ±0.5 27.5 32.5 33.0 36.0 38.0 41.0 MAX Rev. 7a RFB Series Aluminum Electrolytic Capacitors (High R.C., Long Life) MERITEK DIMENSIONS (Ø12.5~ Ø18) Item 12.5 x 20 Lead wire diameter d Body height A Intervals of bodies P Intervals of punched holes P0 Distance between holes and lead wire P1 Distance between holes and bodies Distance between lead and lead Base tape width Adhesive tape width Deviation between holes and base tape Deviation between adhesive and base tape Case Size Symbol 12.5 x 25 12.5 x 30 16 x 25 16 x 31.5 0.6 21.5 26.5 16 x 35.5 18 x 35.5 0.8 31.5 26.5 15.0 33 37.0 37.0 3.75 5.0 ±0.7 ±1.0 +0.8 -0.2 7.5 W W0 18.0 ±0.5 15.0 MIN W1 9.0 ±0.5 W2 1.5 MAX Distance between body bottom and tape center H Distance between body top and tape center H1 Punched hole diameter D0 4.0 ±0.3 Length of not good lead slit L 11.0 MAX t 0.6 ±0.3 ∆h 0 ±2.0 ∆h1 0 ±1.0 Base and adhesive tape thickness Deviation of body alignment Deviation of body alignment 16.5 40.5 45.5 18.5 50.5 46.5 Fig 5. Fig 6. ±0.2 7.5 F MAX ±1.0 15.0 P2 Remark ±0.05 30.0 5.0 Tolerance 53.5 ±0.5 56.5 56.5 Fig 5. Fig 6. MAX Rev. 7a Aluminum Electrolytic Capacitors RFB Series (High R.C., Long Life) MERITEK Rev. 7a Aluminum Electrolytic Capacitors RFB Series (High R.C., Long Life) MERITEK SOLDERABILITY Capacitor lead wire is dipping into the oven, and then, dipping in 245±3℃, solder liquid for 3±0.5 seconds, the substance is above the liquid solder 2mm, the dipping lead must be adherent 95% fresh tin at least. RESISTANCE TO SOLDERING HEAT Put capacitor lead wire to dip 260±5℃ in solder liquor away the body 2mm, after 10±1 seconds taken out, after 2 hours in room temperature, should do final measurements, the values are following: (A) Capacitance change: ≦ ±10% of initial value (B) Dissipation factor: ≦ initial specified value (C) Leakage current: ≦ initial specified value (D) Visual: No damage Rev. 7a