PERKINELMER SUPPLIES ▬ TESTED AND APPROVED GC Syringes and Ferrules PerkinElmer offers an extensive line of syringes and ferrules to meet all your application needs. Syringes are individually inspected for accuracy and performance. Manufactured for precise liquid delivery, each syringe is engineered to assure maximum accuracy error of ±2%. Our ferrule selection includes Graphite, Graphite/ Vespel®, Capillary Column and SilTite™ metal nut and ferrule for GC/MS. GAS CHROMATOGRAPHY AUTOSAMPLER SYRINGES All needles are 70 mm long with a cone-point style. Fixed Needle Volume 5 µL 5 µL 5 µL Gas Tight 5 µL Gas Tight 50 µL Needle Spare Gauge (OD mm) 26 (0.47) 23 (0.63) 26 (0.47) 23 (0.63) 23 (0.63) Syringe Part No. N6101380 N6101251 N6101389 N6101390 N6101760 Pack Size 1 1 1 1 1 Syringe Part No. N6101253 N6101252 Pack Size 1 1 Removable Needle Volume 0.5 µL 0.5 µL Needle Spare Gauge (OD mm) 26 (0.47) 23 (0.63) Needle Part No. N6101470 N6101469 Spare Pack Size 1* 1* * Denotes replacement Needle and Plunger kit. GAS CHROMATOGRAPHY FERRULES 15% Graphite/85% Vespel® Ferrules For Injectors and Detectors at atmospheric pressure e.g. FID Column ID 0.25 mm 0.32 mm 0.45-0.53 mm 0.45-0.53 mm 1/8’’ OD Packed Columns 1/4’’ OD Packed Columns No Hole Needle-point style for penetration and pipetting of liquids Autosampler syringes available in 0.5, 5, and 50 µL capacities Capillary-column ferrules available in Graphite, Graphite/ Vespel®, and Vespel® Size of Nut 1/16’’ 1/16’’ 1/16’’ 1/8’’ 1/8’’ 1/4’’ 1/16’’ Ferrule ID 0.4 mm 0.5 mm 0.8 mm 0.8 mm 1/8’’ 1/4’’ – Pack Size 10 10 10 10 10 10 10 Part No. 09920104 09920105 09920107 09920500 09920133 09903739 09920511 100% Graphite Ferrules For Injectors and Detectors at atmospheric pressure e.g. FID (Not for GC/MS) Column ID 0.1-0.32 mm 0.1-0.32 mm 0.45-0.53 mm 0.45-0.53 mm 1/8’’ OD Packed Columns 1/4’’ OD Packed Columns Size of Nut 1/16’’ 1/8’’ 1/16’’ 1/8’’ 1/8’’ 1/4’’ For more details, call your local representative or visit www.perkinelmer.com/gcsupplies Ferrule ID 0.5 mm 0.5 mm 0.8 mm 0.8 mm 1/8’’ 1/4’’ Pack Size 10 10 10 10 10 10 Part No. 09903700 09903981 09920141 09903394 09903915 09920140 SilTite™ Metal Ferrules For GC/MS Interface Connection (Starter Kit) Column ID 0.1-0.25 mm 0.32 mm 0.53 mm Ferrule ID 0.4 mm 0.5 mm 0.8 mm Pack Size 10** 10** 10** Part No. N9306090 N9306091 N9306042 Ferrule ID 0.4 mm 0.5 mm 0.8 mm – 0.8 mm Pack Size 10 10 10 5 – Replacement SilTite™ Ferrules For GC/MS Interface Connection Column ID 0.1-0.25 mm 0.32 mm 0.53 mm Replacement SilTite™ Nuts Graphite Vespel® 0.32 (2 hole) Size of Nut – – – – 1/8’’ Part No. N9306093 N9306094 N9306095 N9306096 N9306097 ** Includes 10 ferrules, 2 SilTite™ nuts. The metal SilTite™ ferrule and nut are manufactured from the same material and will therefore not expand and contract at different coefficient rates. The base of the SilTite™ ferrule forms a perfect seal with the MS interface, covering the whole transfer interface. SilTite™ metal ferrules have a temperature limit well above the temperature capacity of the injector, MS interface or GC oven. For more details, call your local representative or visit www.perkinelmer.com/gcsupplies PerkinElmer, Inc. 940 Winter Street Waltham, MA 02451 USA Phone: (800) 762-4000 or (+1) 203-925-4602 www.perkinelmer.com For a complete listing of our global offices, visit www.perkinelmer.com/lasoffices ©2008 PerkinElmer, Inc. All rights reserved. SilTite is a trademark of SGE Analytical Science Pty. Ltd. Vespel is a registered trademark of E. I. du Pont de Nemours and Company. 008244_01