Scalable and power-efficient multi-market MCUs LPC54000 Series of MCUs Offering a wide range of performance and feature scalability, the LPC54000 series of single and dual core MCUs delivers improved power-efficiency for a variety of alwayson applications. TARGET APPLICATIONS }} Portable fitness and activity trackers }} Health and wellness monitoring }} Intelligent sensing and motion tracking }} Home and building automation }} Industrial/commercial sensor nodes }} Mobile handsets and tablets }} Fleet management and asset tracking }} Gaming and USB accessories }} Home and building automation OVERVIEW The LPC54000 series represents the next-generation of industry-leading power efficiency. With added scalability and feature integration, these breakthrough devices enable continued growth for always-on applications. The LPC54100 and LPC54110 families, based on the ARM® Cortex®-M4 core, offer an optional Cortex®-M0+ co-processor for added flexibility. The LPC54110 family finds the right balance between feature integration and power efficiency with the ARM® Cortex®-M4 achieving an active mode current of 80 µA/ MHz. With an industry-leading dual-core option, the LPC5411x MCU can shut down the Cortex®-M4 for a tiered power approach and use the Cortex®-M0+ to perform less taxing tasks, achieving an even lower active mode of 60 µA/MHz. The optional on-chip digital microphone (DMIC) subsystem on the LPC54110 family dramatically reduces power consumed in applications that demand voice input and processing, achieving the stringent power efficiencies needed for always-on voice-activation in battery-operated products. LOW-POWER ARCHITECTURE LPC54000 SERIES BLOCK DIAGRAM The LPC54000 series is architected for power efficiency. In addition to the dual-core optimization, the low-power interfaces can wake the CPU from power down once data is received. The 12-bit, 12-channel ADC delivers 5 Msps operation at full spec, including 1.62 V, which performs conversion while the CPU is asleep. The low-power flash is writable at 1.62 V. Core and peripheral voltages are automatically scaled for reduced power consumption at any frequency. An asynchronous peripheral bus enables reduced peripheral clock speed without affecting the CPU clock, which minimizes peripheral power consumption. COMPREHENSIVE ENABLEMENT SOLUTIONS LPCOpen }} Extensive suite of robust peripheral drivers, stacks and middleware }} Includes software examples demonstrating use of peripheral drivers and middleware }} Operating system abstraction (OSA) layer with FreeRTOS application examples Integrated Development Environments (IDE) }} IAR Embedded Workbench® }} ARM Keil® Microcontroller Development Kit }} LPCXpresso System Core Timers DMA 32-bit General Purpose ARM® Cortex®-M4 (100 MHz, MPU, FPU) Low-Power Management Single VDD power supply, reduced power modes, automatic voltage scaling Cortex®-M0+ Co-processor Clock Generation Unit SCTimer/PWM WWDT 24-bit Multi-Rate RTC/Alarm Repetitive Interrupt Micro-Tick Multilayer Bus Matrix Low-Power Analog Advanced Connectivity ADC 12-bit, 12-ch., 5 Msps DMIC Subsystem Temp. Sensor Crystal-less USB 2.0 Low Power Interfaces I 2C SPI UART I 2S Memory Flash Up to 512 KB RAM Up to 192 KB ROM Bootloader I2C/SPI Drivers (LP54110) GPIO (Up to 50) Optional LPC54000 SERIES OF POWER-EFFICIENT MCUS Parts LPC54113J128BD64 LPC54113J256BD64 LPC54113J256UK49 LPC54114J256BD64 LPC54114J256UK49 LPC54101J256UK49 LPC54101J512UK49 LPC54101J256BD64 LPC54101J512BD64 LPC54102J256UK49 LPC54102J512UK49 LPC54102J256BD64 LPC54102J512BD64 Core Flash (kbit) RAM (kbit) M4 M4 M4 M4/M0+ M4/M0+ M4 M4 M4 M4 M4/M0+ M4/M0+ M4/M0+ M4/M0+ 128 256 256 256 256 256 512 256 512 256 512 256 512 96 192 192 192 192 104 104 104 104 104 104 104 104 Digital Crystal-less Package Microphone FS USB name Subsystem Yes Yes Yes Yes Yes No No No No No No No No Yes Yes Yes Yes Yes No No No No No No No No LQFP64 LQFP64 WLCSP49 LQFP64 WLCSP49 WLCSP49 WLCSP49 LQFP64 LQFP64 WLCSP49 WLCSP49 LQFP64 LQFP64 Recommended Development Board OM13089 OM13089 OM13089 OM13089 OM13089 OM13077 OM13077 OM13077 OM13077 OM13077 OM13077 OM13077 OM13077 ROM Development Hardware }} Common bootloader for the LPC54000 Series }} LPCExpresso development boards }} In-system flash programming over a serial connection: erase, program, verify –– No-cost, as well as a professional integrated development environment (IDE) for LPC MCUs }} ROM or flash-based bootloader with open-source software and host-side programming utilities –– Eclipse and GCC-based IDE for C/C++ editing, compiling and debugging }} Providing commonly used I2C and SPI drivers in the LPC54110 family of products –– Low-cost evaluation –– Arduino™ R3 compatible shields www.nxp.com/LPC54000 NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners. ARM, Cortex, and Keil are registered trademarks of ARM Limited (or its subsidiaries) in the EU and/or elsewhere. All rights reserved. © 2016 NXP B.V. Document Number: LPC54000SERFS REV 0 Date of release: February 2016 Document order number: 9397 750 17616