TLMO1000, TLMS1000, TLMS1001, TLMY1000 Vishay Semiconductors Low Current 0603 SMD LED 18562 DESCRIPTION The new 0603 LED series have been designed in the smallest SMD package. This innovative 0603 LED technology opens the way to • smaller products of higher performance • more design in flexibility • enhanced applications The 0603 LED is an obvious solution for small-scale, high power products that are expected to work reliability in an arduous environment. PRODUCT GROUP AND PACKAGE DATA • Product group: LED • Package: SMD 0603 • Product series: low current • Angle of half intensity: ± 80° FEATURES • Smallest SMD package 0603 with exceptional brightness 1.6 mm x 0.8 mm x 0.6 mm (L x W x H) e4 • High reliability lead frame based • Temperature range - 40 °C to + 100 °C • Footprint compatible to 0603 chipled • Wavelength 633 nm (red), 606 nm (orange), 587 nm (yellow) • AllnGaP technology • Compatible to IR reflow soldering • Viewing angle: extremely wide 160° • Grouping parameter: luminous intensity, wavelength • Available in 8 mm tape • Lead (Pb)-free device • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC • Preconditioning: acc. to JEDEC level 2 • Automotive qualified AEC-Q101 APPLICATIONS • Backlight keypads • Navigation systems • Cellular phone displays • Displays for industrial control systems • Automotive features • Miniaturized color effects • Traffic displays PARTS TABLE PART COLOR, LUMINOUS INTENSITY TLMS1000-GS08 Red, IV = 4 mcd (typ.) TLMS1001-GS08 Red, IV = (4.5 to 9) mcd (typ.) TLMO1000-GS08 Soft orange, IV = 7.5 mcd (typ.) TLMY1000-GS08 Yellow, IV = 7.5 mcd (typ.) Document Number 83172 Rev. 1.6, 15-Oct-08 For technical support, please contact: [email protected] www.vishay.com 1 TLMO1000, TLMS1000, TLMS1001, TLMY1000 Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS 1) TLMS100., TLMO1000, TLMY1000 PARAMETER Reverse voltage TEST CONDITION SYMBOL VALUE UNIT VR 12 V mA 2) DC Forward current Tamb ≤ 95 °C IF 15 tp ≤ 10 µs IFSM 0.1 A PV 40 mW Surge forward current Power dissipation Tj 120 °C Operating temperature range Tamb - 40 to + 100 °C Storage temperature range Tstg - 40 to + 100 °C acc. Vishay spec Tsd 260 °C mounted on PC board (pad size > 5 mm2) RthJA 500 K/W Junction temperature Soldering temperature Thermal resistance junction/ ambient Note: 1) Tamb = 25 °C, unless otherwise specified 2) Driving the LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS 1) TLMS100., RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. TLMS1000 IV 1.8 4 Luminous intensity IF = 2 mA IV 4.5 Dominant wavelength IF = 2 mA λd 624 Peak wavelength IF = 2 mA λp 640 Angle of half intensity IF = 2 mA ϕ ± 80 Forward voltage IF = 2 mA VF 1.8 Reverse voltage IR = 10 µA VR VR = 0, f = 1 MHz Cj Junction capacitance TLMS1001 628 MAX. UNIT mcd 9 mcd 636 nm nm deg 2.6 6 V V 15 pF Note: Tamb = 25 °C, unless otherwise specified 1) OPTICAL AND ELECTRICAL CHARACTERISTICS 1) TLMO1000, SOFT ORANGE TEST CONDITION SYMBOL MIN. TYP. Luminous intensity PARAMETER IF = 2 mA IV 3.55 7.5 Dominant wavelength IF = 2 mA λd 600 Peak wavelength IF = 2 mA λp 610 Angle of half intensity IF = 2 mA ϕ ± 80 Forward voltage IF = 2 mA VF 1.8 Reverse voltage IR = 10 µA VR VR = 0, f = 1 MHz Cj Junction capacitance 605 6 MAX. UNIT mcd 609 nm nm deg 2.6 V V 15 pF Note: 1) T amb = 25 °C, unless otherwise specified www.vishay.com 2 For technical support, please contact: [email protected] Document Number 83172 Rev. 1.6, 15-Oct-08 TLMO1000, TLMS1000, TLMS1001, TLMY1000 Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS 1) TLMY1000, YELLOW TEST CONDITION SYMBOL MIN. TYP. Luminous intensity PARAMETER IF = 2 mA IV 3.55 7.5 Dominant wavelength IF = 2 mA λd 580 588 Peak wavelength IF = 2 mA λp 591 nm Angle of half intensity IF = 2 mA ϕ ± 80 deg Forward voltage IF = 2 mA VF 1.8 IR = 10 μA VR VR = 0, f = 1 MHz Cj Reverse voltage Junction capacitance MAX. UNIT mcd 595 nm 2.6 V 6 V 15 pF Note: 1) Tamb = 25 °C, unless otherwise specified COLOR CLASSIFICATION DOMINANT WAVELENGTH (nm) GROUP YELLOW ORANGE MIN. MAX. MIN. MAX. 2 580 583 600 603 3 583 586 602 605 4 586 589 604 607 5 589 592 606 609 6 592 595 Note: Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± 1 nm LUMINOUS INTENSITY CLASSIFICATION GROUP LUMINOUS INTENSITY (mcd) MIN. MAX. G1 1.80 2.24 G2 2.24 2.80 H1 2.80 3.55 H2 3.55 4.50 J1 4.50 5.60 7.10 J2 5.60 K1 7.10 9.00 K2 9.00 11.20 L1 11.20 14.00 L2 14.00 18.00 Note: Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one reel. In order to ensure availability, single wavelength groups will not be orderable. Document Number 83172 Rev. 1.6, 15-Oct-08 For technical support, please contact: [email protected] www.vishay.com 3 TLMO1000, TLMS1000, TLMS1001, TLMY1000 Vishay Semiconductors TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified orange 1 0.1 0.01 0.1 1 orange 6 4 2 0 -2 -4 -6 - 20 10 IF - Forward Current (mA) 19127 8 Δλd - Change of Dom. Wavelength (nm) I Vrel - Relative Luminous Intensity 10 19136 Figure 1. Relative Luminous Intensity vs. Forward Current 2.4 orange 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 - 20 0 I Vrel - Relative Luminous Intensity I F - Forward Current (mA) 1 0.1 1 1.5 2 2.5 3 VF - Forward Voltage (V) 19130 19139 Figure 2. Forward Current vs. Forward Voltage orange 0.6 0.4 0.2 0 - 0.2 - 0.4 - 0.6 - 0.8 -1 0.1 19133 1 IF - Forward Current (mA) 10 Figure 3. Dominant Wavelength vs. Forward Current www.vishay.com 4 40 60 80 100 IF = 2 mA 20 40 60 80 100 Tamb - Ambient Temperature (°C) Figure 5. Relative Luminous Intensity vs. Amb. Temperature V F - Forward Voltage (V) λ d - Dominant Wavelength (nm) 1 0.8 20 Figure 4. Change of Dominant Wavelength vs. Ambient Temperature 10 orange 0 Tamb - Ambient Temperature (°C) 2.20 orange 2.15 2.10 2.05 2.00 1.95 1.90 1.85 1.80 1.75 1.70 1.65 1.60 - 20 0 19143 IF = 20 mA 20 40 60 80 100 Tamb - Ambient Temperature (°C) Figure 6. Forward Voltage vs. Ambient Temperature For technical support, please contact: [email protected] Document Number 83172 Rev. 1.6, 15-Oct-08 TLMO1000, TLMS1000, TLMS1001, TLMY1000 Δ λ d - Change of Dom. Wavelength (nm) Vishay Semiconductors I Vrel- Relative Luminous Intensity 10 yellow 1 0.1 0.01 0.1 19128 1 IF - Forward Current (mA) 10 yellow 8 6 4 2 0 -2 -4 -6 - 20 10 19137 Figure 7. Relative Luminous Intensity vs. Forward Current 40 60 80 100 I Vrel - Relative Luminous Intensity 2.4 yellow I F - Forward Current (mA) 20 Figure 10. Change of Dominant Wavelength vs. Ambient Temperature 10 1 1 1.5 2 2.5 1.6 1.2 0.8 0.4 19141 Figure 8. Forward Current vs. Forward Voltage 1 0.8 0 - 20 3 VF - Forward Voltage (V) 19131 IF = 2 mA yellow 2.0 0.1 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Figure 11. Relative Luminous Intensity vs. Amb. Temperature 2.2 yellow IF = 20 mA yellow 0.6 V F - Forward Voltage (V) λ d - Dominant Wavelength (nm) 0 Tamb - Ambient Temperature (°C) 0.4 0.2 0 - 0.2 - 0.4 - 0.6 2.1 2.0 1.9 1.8 1.7 - 0.8 -1 0.1 19134 1 IF - Forward Current (mA) Figure 9. Dominant Wavelength vs. Forward Current Document Number 83172 Rev. 1.6, 15-Oct-08 1.6 - 20 10 19144 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Figure 12. Forward Voltage vs. Ambient Temperature For technical support, please contact: [email protected] www.vishay.com 5 TLMO1000, TLMS1000, TLMS1001, TLMY1000 Δ λ d - Change of Dom. Wavelength (nm) Vishay Semiconductors IVrel - Relative Luminous Intensity 10 red 1 0.1 0.01 0.1 1 10 IF - Forward Current (mA) 19129 1 0.1 2 2.5 3 VF - Forward Voltage (V) 1.95 0.4 0.2 0 - 0.2 - 0.4 - 0.6 1 10 IF - Forward Current (mA) Figure 15. Dominant Wavelength vs. Forward Current www.vishay.com 6 20 40 60 80 100 IF = 2 mA 20 40 60 80 100 Tamb - Ambient Temperature (°C) IF = 20 mA red 1.90 1.85 1.80 1.75 1.70 1.65 - 0.8 19135 0 Tamb - Ambient Temperature (°C) 2.00 red 0.6 -1 0.1 -4 - 20 Figure 17. Relative Luminous Intensity vs. Amb. Temperature V F - Forward Voltage (V) λ d - Dominant Wavelength (nm) 1 -2 19142 Figure 14. Forward Current vs. Forward Voltage 0.8 0 2.4 2.2 red 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 - 20 0 I Vrel - Relative Luminous Intensity I F - Forward Current (mA) red 1.5 2 Figure 16. Change of Dominant Wavelength vs. Ambient Temperature 10 1 red 4 19138 Figure 13. Relative Luminous Intensity vs. Forward Current 19132 6 1.60 - 20 19145 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Figure 18. Forward Voltage vs. Ambient Temperature For technical support, please contact: [email protected] Document Number 83172 Rev. 1.6, 15-Oct-08 TLMO1000, TLMS1000, TLMS1001, TLMY1000 Vishay Semiconductors REEL DIMENSIONS in millimeters 19043 TAPE DIMENSIONS in millimeters 19044 Document Number 83172 Rev. 1.6, 15-Oct-08 For technical support, please contact: [email protected] www.vishay.com 7 TLMO1000, TLMS1000, TLMS1001, TLMY1000 Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 19426 SOLDERING PROFILE IR Reflow Soldering Profile for lead (Pb)-free soldering Preconditioning acc. to JEDEC Level 2 300 Temperature (°C) max. 260 °C 245 °C 255 255 °C 240 °C 217 °C 250 200 max. 30 s 150 max. 100 s max. 120 s 100 max. Ramp Up 3 °C/s 50 max. Ramp Down 6 °C/s 0 0 19470-4 50 100 150 Time (s) 200 250 300 max. 2 cycles allowed Figure 19. Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020C) www.vishay.com 8 For technical support, please contact: [email protected] Document Number 83172 Rev. 1.6, 15-Oct-08 TLMO1000, TLMS1000, TLMS1001, TLMY1000 Vishay Semiconductors DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Aluminum bag Label Reel 17028 Example of JESD22-A112 level 2 label 15973 FINAL PACKING The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes. RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminium bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. After more than 1 year under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2 label is included on all dry bags. Document Number 83172 Rev. 1.6, 15-Oct-08 ESD PRECAUTION Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electro-static sensitive devices warning labels are on the packaging. VISHAY SEMICONDUCTORS STANDARD BAR CODE LABELS The Vishay Semiconductors standard bar code labels are printed at final packing areas. The labels are on each packing unit and contain Vishay Semiconductors specific data. For technical support, please contact: [email protected] www.vishay.com 9 TLMO1000, TLMS1000, TLMS1001, TLMY1000 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 10 For technical support, please contact: [email protected] Document Number 83172 Rev. 1.6, 15-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1