Brochure - SIMOTICS L Linear Motors - Highly dynamic direct drives for linear axes

© Siemens AG 2015
SIMOTICS L Linear Motors
Highly dynamic direct drives for linear axes
Motors
Brochure
Edition
February
2015
siemens.com/linearmotors
© Siemens AG 2015
SIMOTICS Motors for Motion Control Tasks
The right motor for any motion control task
General characteristics of SIMOTICS L linear motors
SIMOTICS L highlights
Siemens offers a range of linear motors designed specifically for the needs of motion control applications.
Our motors are optimally harmonized to operate with the
SINAMICS S120 drive system.
◾◾ Maximum forces up to 20,700 Nm
Linear motors are the ideal solution when linear motion
with high dynamic performance and precision is required.
◾◾ Compact design due to high power density
◾◾ Over 70 standard versions available
◾◾ Velocities from 105 to 836 m/min
◾◾ Wear/maintenance-free operation
◾◾ No mechanical transmission components
◾◾ High control precision is possible
Excellent dynamic characteristics, compact design and
high durability as well as easy handling are the core
characteristics of this motor series.
◾◾ Water-cooled versions
The motors require no maintenance and therefore
add to high technical availability.
SIMOTICS
Low-voltage motors for line and converter operation
General purpose
SIMOTICS GP
Severe duty
SIMOTICS SD
Explosion-proof
SIMOTICS XP
Transnorm
SIMOTICS TN
Definite purpose
SIMOTICS DP
DC motors
High-voltage motors
Direct current SIMOTICS DC
High-voltage SIMOTICS HV
High torque
SIMOTICS HT
Motors for motion control
SIMOTICS S servomotors
SIMOTICS M main motors
SIMOTICS L linear motors
SIMOTICS T torque motors
Servo motors with the highest dynamics
and precision characteristics
Main motors with the world’s largest performance range and selection flexibility due to
their modular design
Linear motors for extreme dynamic performance, peak force, and precision for linear
traversing motion
Torque motors with the highest precision
through the whole torque range
in a highly compact
design with rotary axes
Overview of the entire SIMOTICS motor portfolio
SIMOTICS – The broadest motor portfolio worldwide. From low-voltage motors, through motors for motion control tasks,
all the way to DC and high-voltage motors. With a wide range of performance categories and sizes, you are certain to find
the right answer for your specific requirements.
2
SIMOTICS L Linear Motors
© Siemens AG 2015
SIMOTICS L-1FN3 Linear Motors
The well-proven standard for linear movements in the machine tool
for over 10 years
We offer a comprehensive portfolio
Applications
The modular designed structure of SIMOTICS L-1FN3
provides a comprehensive variety of motors. You can make
the optimum choice to suit the available installation space.
Developed especially for use in machine tools, and
well-proven in this area, SIMOTICS L-1FN3
sets the standard. It is characterized by robust design and
thermal enclosure.
A total of 7 widths each with up to 5 different construction
length are available.
SIMOTICS L-1FN3 motors are available with several winding types, all harmonized to the SINAMICS S120 drive
system.
If required customer specific solutions can be designed
with help of application and mechatronic support services.
These services include for example dimensioning and
simulation.
Application examples:
•Turning, milling, and grinding machines
•Laser machining centers
•Handling
•Production machines
•Oscillators
•Test setups
By an extensive range of accessories an increase of robustness and thermal encapsulation is possible.
Precision cooler
Primary section
Secondary section
Secondary section cover
Power cooler
Heatsink profile
Connection cover
Cooling profile end-piece
Components and options of 1FN3 linear motors
SIMOTICS L Linear Motors
3
© Siemens AG 2015
SIMOTICS L-1FN3 Linear Motors
Technical specifications
Technical specifications
Synchronous linear motors
Characteristic
Iron-core synchronous linear motor with permanent magnets
Degree of protection
IP65
Type of construction
Modular, delivered as components
Line voltage
400 ... 480 V
Static force F0
0.7 x Frated
Connection method
Power and signal connection via terminal box or via permanently connected power and signal cables
Insulation of primary section winding
Temperature class 155 (F)
Encoder system
External encoder, depending on machine design
Siemens drive system
SINAMICS S120
Tools
SINAMICS configuration
SIZER, DT Configurator
Our product range – what we have to offer
Feedrate force
Feedrate force
Maximum
velocity
Frated
N
Fmax
N
VMax at Frated
m/min
Motor type
Primary sect.
Length
Installation width
Primary section
with / without
Precision cooling
Mounting height
Motor
with / without
Precision cooler
LP
mm
bM
mm
hM
mm
Overload factor
1FN3, version for peak load
200
200 ... 1,125
340 ... 1,690
610 ... 2,450
1.930 ... 3,860
2.610 ... 5,220
4.050 ... 8,100
550
490 ... 2,750
820 ... 4,120
1,720 ... 6,900
5,180 ... 10,350
6,900... 13,800
10,350 ... 20,700
373
255 ... 497
282
176 ... 836
112 ... 519
105 ... 279
160 ... 253
1FN3050
1FN3100
1FN3150
1FN3300
1FN3450
1FN3600
1FN3900
255
150 ... 570
150 ... 570
221 ... 704
382 ... 704
382 ... 704
382 ... 704
76 / 67
105 / 96
135 / 126
150 / 141
197 / 188
257 / 248
351 / 342
63.4 / 48.5
63.4 / 48.5
65.4 / 50.5
79.0 / 64.1
81.0 / 66.1
86.0 / 64.1
88.0 / 66.1
max. 2.8
202 ... 435
211 ... 307
200 ... 292
196 ... 257
190 ... 271
199 ... 200
129 ... 130
1FN3050
1FN3100
1FN3150
1FN3300
1FN3450
1FN3600
1FN3900
162 ... 267
162 ... 477
162 ... 477
238 ... 721
399 ... 721
399 ... 721
399 ... 721
76 / 67
105 / 96
135 / 126
150 / 141
197 / 188
257 / 248
351 / 342
74.3 / 59.4
74.3 / 59.4
76.3 / 61.4
92.9 / 78.0
94.9 / 80.0
99.9 / 78.0
101.9 / 80.0
max. 1.8
1FN3, version for continuous load
150 ... 300
300 ... 1,205
455 ... 1,810
865 ... 3,460
2,595 ... 5,185
3,460 ... 6,915
5,185 ... 10,375
260 ... 510
510 ... 2,040
770 ... 3,060
1,470 ... 5,870
4,400 ... 8,810
5,870 ... 11,740
8,810 ... 17,610
Dimensional drawing
LS
LP
hM
bM
hM
bM
bS
bS
LS
LP
N
hS
Primary section
1FN3050 to 1FN3450 without precision cooling
N
hS
Primary section
1FN3600 to 1FN3900 without precision cooling
SIMOTICS L Linear Motors
4
© Siemens AG 2015
SIMOTICS L Linear Motors
Powerful tools and competent support
Position [mm]
1.2
+
1
0.8
+
0.6
-
-
+
+
-
-
0.4
0.2
0
0
+
0.05
0.1
-
+
-
0.15
Time [sec]
Machining center with linear motor
Mechatronic simulation of machine concepts
Focused motor selection and dimensioning:
SIZER engineering software
Application and mechatronic support for motors:
Faster to the machine – faster to market
SIZER supports you with the dimensioning of our standard
motors and selection of the necessary drive components.
The configuring software includes a motor wizard. Starting
from the application, the software guides you step by step
through dimensioning your motor. The result is a list of all
the components along with the relevant order data.
Linear motors offer greater potential for enhancing
machine performance. However, high
machine performance can only be achieved if the machine
is designed for the integration of built-in motors as direct
drives from the outset.
… with the integrated CAD tool,
CAD CREATOR
A presentation of technical specifications, dimension
sheets and CAD data – generated by the integrated tool
CAD CREATOR – can be loaded into the plant documentation very easily and be reused for the mechanical design
process.
With application and mechatronic support for motors,
Siemens supports the development of new machines from
the design stage through to machine acceptance tests with
the following services:
•Optimum selection and dimensioning of all
motor and control loop components
•Mechatronic analysis and simulation of machine designs
•Computer-assisted (finite-elemente-method) analysis
and optimization of machine structures
•Commissioning and control loop optimization
Siemens has acquired many years of experience and
specific expertise in employing direct drives in tool and
production machinery. On this basis, we look forward to
making our contribution to quick and secure implementation of your development objectives, too.
Please get in touch with us:
[email protected]
SIMOTICS L Linear Motors
5
© Siemens AG 2015
There’s more to it
www.siemens.com/ids
Discover in detail
how integrated drive
systems boost your
competitive edge
and reduce your
time to profit.
For more on
integrated drive
systems,
visit our mobile
website.
Follow us on:
www.twitter.com/siemensindustry
www.youtube.com/siemens
Siemens AG
Digital Factory
Motion Control
Postfach 31 80
91050 ERLANGEN
GERMANY
Subject to change without prior notice
Article No.: 6ZB5711-0BL02-0AA1
V6.MKMOTO.WES / Dispo 18401
BR 0215 PDF SB 6 EN
Produced in Germany
© Siemens AG 2015
The information provided in this brochure
contains descriptions or characteristics of performance
which in the case of actual use do not always apply as
described or which may change as a result of further
development of the products. An obligation to provide the
respective characteristics shall only exist if expressly
agreed in the terms of contract. Availability and technical
specifications are subject to change without notice.
Any product designations contained herein may be
trademarks or product names of Siemens AG or supplier
companies whose use by third parties for their own
purposes could violate the rights of the owners.
Similar pages