74LVC2G14

74LVC2G14
DUAL SCHMITT TRIGGER INVERTERS
Description
Pin Assignments
The 74LVC2G14 is a dual Schmitt trigger inverter gate with
( Top View )
( Top View )
standard push-pull outputs. The device is designed for operation
with a power supply range of 1.65V to 5.5V. The inputs are
6 1Y
1A 1
tolerant to 5.5V allowing this device to be used in a mixed voltage
environment. The device is fully specified for partial power down
5 Vcc
GND 2
applications using IOFF. The IOFF circuitry disables the output
4 2Y
2A 3
preventing damaging current backflow when the device is powered
1A
1
6 1Y
GND
2
5 Vcc
2A
3
4 2Y
X2-DFN1410-6
down.
SOT26 / 363
( Top View)
The gate performs the positive Boolean function:
( Bottom View )
YA
2A 3
4 2Y
1A
1
6
GND
2A
2
5
Vcc
3
4
2Y
1Y
X1-DFN1010-6
GND 2
Features
1A 1

Wide Supply Voltage Range from 1.65V to 5.5V

±24mA Output Drive at 3.0V

CMOS Low Power Consumption

IOFF Supports Partial-Power-Down Mode Operation

Inputs Accept up to 5.5V

ESD Protection Tested per JESD 22
5 Vcc
6 1Y
DFN1409
Chip Scale
Alternative
1A
6 1Y
1
GND 2
5 Vcc
2A 3
4 2Y
X2-DFN1010-6

Exceeds 200-V Machine Model (A115)

Exceeds 2000-V Human Body Model (A114)
Applications

Exceeds 1000-V Charged Device Model (C101)


Voltage Level Shifting
Latch-Up Exceeds 100mA per JESD 78, Class I


General Purpose Logic
DFN1409 Package Designed as a Direct Replacement for Chip

Power Down Signal Isolation
Scale Packaging

Wide Array of Products Such As:

( Top View )
Range of Package Options SOT26, SOT363, X1-DFN1010-6,

PCs, Networking, Notebooks, Netbooks, Tablets
X2-DFN1010-6, X2-DFN1409-6, and X2-DFN1410-6


Computer Peripherals, Hard Drives, SSD, CD/DVD ROM
Leadless Packages Named per JESD30E


TV, DVD, DVR, Set Top Box
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

Halogen and Antimony Free. “Green” Device (Note 3)

Cell Phones, Personal Navigation / GPS

MP3 Players ,Cameras, Video Recorders
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
74LVC2G14
Document number: DS35163 Rev. 6 - 2
1 of 14
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G14
Ordering Information
74LVC2G
Logic Device
Function
74 : Logic Prefix
LVC : 1.65V to 5.5V
Logic Family
2G : Two Gates
14 :
Package
Inverter / Driver
with Schmitt
Trigger Inputs
Part Number
Package
Code
Package
(Note 4)
74LVC2G14W6-7
W6
SOT26
74LVC2G14DW-7
DW
SOT363
74LVC2G14FW5-7
FW5
X1-DFN1010-6
74LVC2G14FW4-7
FW4
X2-DFN1010-6
74LVC2G14FX4-7
FX4
X2-DFN1409-6
Chip Scale Alternative
74LVC2G14FZ4-7
FZ4
X2-DFN1410-6
Notes:
14 XXX -7
Packing
-7 : 7” Tape & Reel
W6 : SOT26
DW : SOT363
FW5 : X1-DFN1010-6
FW4 : X2-DFN1010-6
FX4 : X2- DFN1409-6
FZ4 : X2- DFN1410-6
7” Tape and Reel (Note 5)
Quantity
Part Number Suffix
Package
Size
2.8mm X 2.2 mm X 1.1mm
0.95 mm lead pitch
2.0mm X 2.0mm X 1.1mm
0.65 mm lead pitch
1.0mm X 1.0mm X 0.5mm
0.35 mm pad pitch
1.0mm X 1.0mm X 0.4mm
0.35 mm pad pitch
1.4mm X 0.9mm X 0.4mm
0.5 mm pad pitch
1.4mm X 1.0mm X 0.4mm
0.5 mm pad pitch
3000/Tape & Reel
-7
3000/Tape & Reel
-7
5000/Tape & Reel
-7
5000/Tape & Reel
-7
5000/Tape & Reel
-7
5000/Tape & Reel
-7
4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
5. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf
.
.
Pin Descriptions
Logic Diagram
Pin Name
Pin Number
1A
GND
2A
2Y
Data Input
Ground
Data Input
Data Output
VCC
1
2
3
4
5
Function
1Y
6
Data Output
1A
1
6
3
4
1Y
Supply Voltage
2A
2Y
Function Table
Inputs
A
Output
Y
H
L
L
H
74LVC2G14
Document number: DS35163 Rev. 6 - 2
2 of 14
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G14
Absolute Maximum Ratings (Notes 6 and 7) (@TA = +25°C, unless otherwise specified.)
Symbol
ESD HBM
ESD CDM
ESD MM
Parameter
Human Body Model ESD Protection
Charged Device Model ESD Protection
Machine Model ESD Protection
Rating
Unit
2
1
200
kV
kV
V
Supply Voltage Range
-0.5 to +6.5
V
VI
Input Voltage Range
-0.5 to +6.5
V
VO
Voltage Applied to Output in High Impedance or IOFF State
-0.5 to +6.5
V
VO
Voltage Applied to Output in High or Low State
IIK
VCC
-0.3 to VCC +0.5
V
Input Clamp Current VI < 0
-50
mA
IOK
Output Clamp Current VO < 0
-50
mA
IO
Continuous Output Current
—
Continuous Current Through VDD or GND
TJ
TSTG
Note:
-50
mA
±100
mA
Operating Junction Temperature
-40 to +150
°C
Storage Temperature
-65 to +150
°C
6. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be
within recommend values.
7. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could cause
a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range.
Recommended Operating Conditions (Note 8) (@TA = +25°C, unless otherwise specified.)
Symbol
VCC
Max
Unit
1.65
5.5
V
Data retention only
1.5
—
V
VI
Input Voltage
0
5.5
V
VO
Output Voltage
0
VCC
V
VCC = 1.65V
—
-4
VCC = 2.3V
—
-8
—
-16
—
-24
VCC = 4.5V
—
-32
VCC = 1.65V
—
4
VCC = 2.3V
—
8
—
16
—
24
VCC = 4.5V
—
32
VCC = 1.8V ± 0.15V, 2.5V ± 0.2V
—
20
VCC = 3.3V ± 0.3V
—
10
VCC = 5V ± 0.5V
—
5
—
-40
+125
IOH
IOL
Δt/ΔV
TA
Note:
Parameter
Operating Voltage
Min
Operating
High-Level Output Current
VCC = 3V
Low-Level Output Current
VCC = 3V
Input Transition Rise or Fall Rate
Operating Free-air Temperature
mA
mA
ns/V
ºC
8. Unused inputs should be held at VCC or Ground.
74LVC2G14
Document number: DS35163 Rev. 6 - 2
3 of 14
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G14
Electrical Characteristics
(@TA = +25°C, unless otherwise specified.)
-40°C to +85°C
Symbol
VT+
VT-
∆VT
Parameter
Test Conditions
Hysteresis
(VT+ - VT-)
High-Level Output Voltage
Min
Max
1.8V
0.70
1.50
0.70
1.70
2.3V
1.00
1.80
1.00
2.00
3V
1.30
2.20
1.30
2.40
4.5V
1.90
3.10
1.90
3.30
5.5V
2.20
3.60
2.20
3.80
1.65V
0.25
0.90
0.39
1.10
2.3V
0.40
1.15
0.25
0.87
3V
0.60
1.50
0.40
1.35
4.5V
1.00
2.00
0.60
1.70
5.5V
1.20
2.30
1.00
2.50
1.8V
0.15
1.00
0.37
1.20
2.3V
0.25
1.10
0.15
1.30
3V
0.40
1.20
0.40
1.40
4.5V
0.60
1.50
0.60
1.70
5.5V
0.70
1.70
0.70
1.90
1.65V to 4.5V
VCC – 0.1
—
VCC – 0.1
—
IOH = -4mA
1.65V
1.2
—
0.95
—
IOH = -8mA
2.3V
1.9
—
1.7
—
2.4
—
1.9
—
2.3
—
2.0
—
—
—
IOH = -16mA
3V
IOH = -24mA
VOL
Low-Level Output Voltage
IOH = -32mA
4.5V
3.8
—
3.4
—
IOL = 100μA
1.65V to 4.5V
—
0.1
—
0.10
IOL = 4mA
1.65V
—
0.45
—
0.70
IOL = 8mA
2.3V
—
0.3
—
0.45
—
0.4
—
0.60
IOL = 16mA
3V
IOL = 24mA
IOL = 32mA
II
Input Current
VI = 5.5V or GND
IOFF
Power Down Leakage Current VI or VO = 5.5V
ICC
Supply Current
74LVC2G14
Document number: DS35163 Rev. 6 - 2
Unit
Max
IOH = -100μA
VOH
-40°C to +125°C
Min
Positive-going Input Threshold
—
Voltage
Negative-going Input
Threshold Voltage
VCC
VI = 5.5V or GND, IO =
0
V
V
V
V
V
—
0.55
—
0.80
4.5V
—
0.55
—
0.80
0 to 5.5V
—
±5
—
± 20
μA
0
—
± 10
—
± 20
μA
1.65V to 5.5V
—
10
—
40
μA
4 of 14
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G14
Package Characteristics ((@TA = +25°C, VCC = 3.3V, unless otherwise specified.)
Symbol
Parameter
Package
Input Capacitance
CI
Min
Typ
Max
Unit
—
3.5
—
pF
SOT26
—
204
—
SOT363
—
371
—
—
430
—
X2-DFN1409-6
—
450
—
X1-DFN1010-6
—
495
—
X2-DFN1010-6
—
510
—
SOT26
—
52
—
—
143
—
—
Typical of all packages
X2-DFN1410-6
Thermal Resistance
Junction-to-Ambient
θJA
Conditions
VCC = 3.3V
VI = VCC or GND
(Note 9)
SOT363
Note:
—
X2-DFN1409-6
—
225
—
X1-DFN1010-6
—
245
—
X2-DFN1010-6
—
250
—
X2-DFN1410-6
Thermal Resistance
Junction-to-Case
θJC
190
(Note 9)
°C/W
°C/W
9. Test condition for all packages: : Device mounted on FR-4 substrate PC board, 2oz copper with minimum recommended pad layout.
Switching Characteristics
TA = -40°C to +85°C, CL = 30 or 50pF (see Figure 1)
Parameter
From
(Input)
TO
(OUTPUT)
tPD
A
Y
VCC = 1.8V
± 0.15V
Min
Max
VCC = 2.5V
± 0.2V
Min
Max
VCC = 3.3V
± 0.3V
Min
Max
VCC = 5V
± 0.5V
Min
Max
0.5
0.5
0.5
0.5
11.0
6.5
6.0
Unit
4.3
ns
TA = -40°C to +125°C, CL = 30 or 50pF (see Figure 1)
Parameter
From
(Input)
TO
(OUTPUT)
tPD
A
Y
VCC = 1.8V
± 0.15V
Min
Max
VCC = 2.5V
± 0.2V
Min
Max
VCC = 3.3V
± 0.3V
Min
Max
VCC = 5V
± 0.5V
Min
Max
0.5
0.5
0.5
0.5
12.0
7.2
6.7
4.7
Unit
ns
Operating Characteristics
TA = +25°C
Parameter
CPD
Power Dissipation
Capacitance
74LVC2G14
Document number: DS35163 Rev. 6 - 2
Test
Conditions
VCC = 1.8V
VCC = 2.5V
VCC = 3.3V
VCC = 5V
Typ
Typ
Typ
Typ
f = 10MHz
17
19
20
21
5 of 14
www.diodes.com
Unit
pF
March 2015
© Diodes Incorporated
74LVC2G14
Parameter Measurement Information
From Output
Under Test
C
RL
L
(See Note A)
Inputs
VCC
VM
CL
≤2ns
VCC/2
30 pF
1kΩ
≤2ns
VCC/2
30 pF
500Ω
≤2.5ns
1.5V
50 pF
500Ω
≤2.5ns
VCC/2
50 pF
500Ω
VI
tR/tF
1.8V±0.15V
VCC
2.5V±0.2V
VCC
3.3V±0.3V
3V
5V±0.5V
VCC
RL
tW
Vl
Vl
Input
VM
Input
VM
VM
0V
VM
0V
Voltage Waveform Pulse Duration
tPLH
tPHL
VOH
Output
VM
VM
VOL
tPHL
tPLH
VOH
Output
VM
VM
VOL
Voltage Waveform Propagation Delay Times
Inverting and Non Inverting Outputs
Figure 1. Load Circuit and Voltage Waveforms
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10MHz.
C. Inputs are measured separately one transition per measurement.
D. tPLH and tPHL are the same as tPD.
74LVC2G14
Document number: DS35163 Rev. 6 - 2
6 of 14
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G14
Marking Information
(1) SOT26, SOT363
7
4
7
5
6
XX Y W X
1
Part Number
74LVC2G14W6-7
74LVC2G14DW-7
2
3
XX : Identification code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Internal Code
Package
SOT26
SOT363
Identification Code
Z5
Z5
(2) X1-DFN1010-6, X2-DFN1010-6, X2-DFN1409-6, X2-DFN1410-6
Part Number
74LVC2G14FW4-7
74LVC2G14FW5-7
74LVC2G14FX4-7
74LVC2G14FZ4-7
74LVC2G14
Document number: DS35163 Rev. 6 - 2
Package
X2-DFN1010-6
X1-DFN1010-6
X2-DFN1409-6
X2-DFN1410-6
7 of 14
www.diodes.com
Identification Code
Z5
W5
X5
Z5
March 2015
© Diodes Incorporated
74LVC2G14
SOT26
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A
SOT26
Dim Min Max Typ
A
0.35 0.50 0.38
B
1.50 1.70 1.60
C
2.70 3.00 2.80
D

 0.95
H
2.90 3.10 3.00
J
0.013 0.10 0.05
K
1.00 1.30 1.10
L
0.35 0.55 0.40
M
0.10 0.20 0.15
0°
8° 

All Dimensions in mm
B C
H
K
M
J
L
D
C2
Z
C2
Dimensions Value (in mm)
Z
3.20
G
1.60
X
0.55
Y
0.80
C1
2.40
C2
0.95
C1
G
Y
X
74LVC2G14
Document number: DS35163 Rev. 6 - 2
8 of 14
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G14
SOT363
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A
SOT363
Dim Min Max Typ
A 0.10 0.30 0.25
B 1.15 1.35 1.30
C 2.00 2.20 2.10
D
0.65 Typ
F 0.40 0.45 0.425
H 1.80 2.20 2.15
J
0
0.10 0.05
K 0.90 1.00 1.00
L 0.25 0.40 0.30
M 0.10 0.22 0.11
0°
8°

All Dimensions in mm
B C
H
K
M
J
D
L
F
C2
C2
Dimensions
Z
Z
G
X
Y
C1
C2
C1
G
Y
Value
(in mm)
2.5
1.3
0.42
0.6
1.9
0.65
X
74LVC2G14
Document number: DS35163 Rev. 6 - 2
9 of 14
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G14
X1-DFN1010-6 (Type B)
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A
Seating Plane
X1-DFN1010-6
(Type B)
Dim Min Max
Typ
A
-
0.50
0.39
A1
0.04
b
0.12 0.20
0.15
D
0.95 1.050 1.00
E
0.95 1.050 1.00
e
0.35 BSC
e1
0.55 BSC
L3 0.27 0.30
0.30
L3a 0.32 0.40
0.35
All Dimensions in mm
D
e
L3a
L3(5x)
e1
E
(Pin #1 ID)
b
X1
C
Y(4x)
Y2
Y3
G
G1
Y1
Pin1
74LVC2G14
Document number: DS35163 Rev. 6 - 2
Dimensions
C
G
G1
X
X1
Y
Y1
Y2
Y3
Value
(in mm)
0.350
0.150
0.150
0.200
0.900
0.500
0.525
0.475
1.150
X
10 of 14
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G14
X2-DFN1010-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
A1
A
A3
X2-DFN1010-6
Dim Min Max
Typ
A
–– 0.40
0.39
A1 0.00 0.05
0.02
A3
––
––
0.13
b
0.14 0.20
0.17
b1 0.05 0.15
0.10
D
0.95 1.05
1.00
E
0.95 1.05
1.00
e
––
––
0.35
L
0.35 0.45
0.40
K
0.15 ––
––
Z
––
––
0.065
All Dimensions in mm
D
(Pin #1 ID)
e
b1
E
K
L(6x)
b(6x)
Z(4x)
X1
C
Y (6x)
Y1
Dimensions
Value
(in mm)
C
G
X
X1
Y
Y1
0.350
0.150
0.200
0.900
0.550
1.250
1
G(4x)
74LVC2G14
Document number: DS35163 Rev. 6 - 2
X(6x)
11 of 14
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G14
X2-DFN1409-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A3
A
Seating Plane
D
(Pin #1 ID)
e1
Ø (6x)
e2
E
Z1(4x)
X2-DFN1409-6
Dim Min Max Typ
A
—
0.40 0.39
A1
0
0.05 0.02
A3
—
—
0.13
Ø
0.20 0.30 0.25
D
1.35 1.45 1.40
E
0.85 0.95 0.90
e1
—
—
0.50
e2
—
—
0.50
Z1
—
—
0.075
Z2
—
—
0.075
All Dimensions in mm
Z2(4x)
C
Dimensions
D (6x)
Y
C1
G1
C
C1
D
G
G1
X
Y
Value
(in mm)
1.000
0.500
0.300
0.200
0.200
0.400
0.150
Pin1
X
74LVC2G14
Document number: DS35163 Rev. 6 - 2
G
12 of 14
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G14
X2-DFN1410-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A3
A
Seating Plane
D
e
(Pin #1 ID)
L(6x)
X2-DFN1410-6
Dim
Min
Max
Typ
A
––
0.40 0.39
A1
0.00 0.05 0.02
A3
––
––
0.13
b
0.15 0.25 0.20
D
1.35 1.45 1.40
E
0.95 1.05 1.00
e
––
––
0.50
L
0.25 0.35 0.30
Z
––
––
0.10
Z1
0.045 0.105 0.075
All Dimensions in mm
E
Z1(4x)
Z(4x)
b(6x)
X1
C
Y(6x)
Dimensions
C
G
X
X1
Y
Y1
Y1
1
74LVC2G14
Document number: DS35163 Rev. 6 - 2
G(4x)
X(6x)
13 of 14
www.diodes.com
Value
(in mm)
0.500
0.250
0.250
1.250
0.525
1.250
March 2015
© Diodes Incorporated
74LVC2G14
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
74LVC2G14
Document number: DS35163 Rev. 6 - 2
14 of 14
www.diodes.com
March 2015
© Diodes Incorporated
Similar pages