74AUP2G08

74AUP2G08
DUAL AND GATE
Description
Pin Assignments
The Advanced Ultra Low Power (AUP) CMOS logic family is designed
(Top View)
for low power and extended battery life in portable applications.
The 74AUP2G08 is a dual two input AND gate. Both gates have
NEW PRODUCT
push-pull outputs designed for operation over a power supply range
of 0.8V to 3.6V. The device is fully specified for partial power down
applications using IOFF. The IOFF circuitry disables the output
preventing damaging current backflow when the device is powered
down. Each gate performs the positive Boolean function:
Y = A •B
or
Y =A+B
X2-DFN1210-8
Features
Applications
•
Advanced Ultra Low Power (AUP) CMOS
•
•
•
Supply Voltage Range from 0.8V to 3.6V
±4mA Output Drive at 3.0V
•
•
•
•
Suited for Battery and Low Power Needs
Wide Array of Products Such as:
ƒ
Tablets, E-readers
Low Static Power Consumption
ICC < 0.9µA
ƒ
Cell Phones, Personal Navigation/GPS
ƒ
MP3 Players, Cameras, Video Recorders
Low Dynamic Power Consumption
CPD = 6 pF (Typical at 3.6V)
ƒ
PCs, Ultrabooks, Notebooks, Netbooks
ƒ
Computer Peripherals, Hard Drives, SSD, CD/DVD ROM
Schmitt Trigger Action at all inputs makes the circuit tolerant
ƒ
TV, DVD, DVR, Set-Top Box
for slower input rise and fall time. The hysteresis is typically
250 mV at VCC = 3.0V
•
IOFF Supports Partial-Power-Down Mode Operation
•
ESD Protection Exceeds JESD 22
2000-V Human Body Model (A114)
Exceeds 1000-V Charged Device Model (C101)
•
Latch-Up Exceeds 100mA per JESD 78, Class I
•
Leadless Packages Named per JESD30E
•
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
•
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free,
"Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
74AUP2G08
Document number: DS36141 Rev. 1 - 2
1 of 9
www.diodes.com
January 2015
© Diodes Incorporated
74AUP2G08
Ordering Information
74AUP2G
Logic Device
Function
NEW PRODUCT
74 : Logic Prefix
AUP : 0.8 to 3.6 V
Logic Family
2G : Dual Gate
Device
08 :
XXX -7
Package
RA3 : X2-DFN1210-8
Package
Code
Package
(Notes 4 & 5)
Package
Size
RA3
X2-DFN1210-8
1.2mm X 1.0mm X 0.35mm
0.3 mm lead pitch
74AUP2G08RA3-7
Notes:
2-Input
AND Gates
08
Packing
-7 : 7” Tape & Reel
7” Tape and Reel
Quantity
Part Number
Suffix
5,000/Tape & Reel
-7
4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
5. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf.
Pin Descriptions
Logic Diagram
Pin Name
Pin
1A
1
Data Input
Function
1B
2
Data Input
2Y
3
Data Output
GND
4
Ground
2A
5
Data Input
2B
6
Data Input
1Y
7
Data Output
VCC
8
Supply Voltage
Function Table
Inputs
Output
A
B
Y
L
L
L
L
H
L
H
L
L
H
H
H
74AUP2G08
Document number: DS36141 Rev. 1 - 2
2 of 9
www.diodes.com
January 2015
© Diodes Incorporated
74AUP2G08
Absolute Maximum Ratings (Note 6 & 7)
Symbol
Description
Rating
Unit
ESD HBM
Human Body Model ESD Protection
2
kV
ESD CDM
Charged Device Model ESD Protection
1
kV
200
V
Supply Voltage Range
-0.5 to +4.6
V
VI
Input Voltage Range
-0.5 to +4.6
V
Vo
Voltage Applied to Output in High or Low State
-0.5 to VCC +0.5
V
IIK
Input Clamp Current VI<0
50
mA
IOK
Output Clamp Current (VO < 0 )
50
mA
IO
Continuous Output Current (VO = 0 to VCC)
±20
mA
ICC
Continuous Current Through VCC
50
mA
IGND
Continuous Current Through GND
-50
mA
Operating Junction Temperature
-40 to +150
°C
Storage Temperature
-65 to +150
°C
ESD MM
NEW PRODUCT
VCC
TJ
TSTG
Notes:
Machine Model ESD Protection
6. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device
operation should be within recommend values.
7. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could
cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range.
Recommended Operating Conditions (Note 8)
Symbol
VCC
Parameter
Operating Voltage
Min
Max
Unit
0.8
3.6
V
VI
Input Voltage
0
3.6
V
VO
Output Voltage
0
VCC
V
µA
IOH
IOL
High-Level Output Current
Low-Level Output Current
∆t/∆V
Input Transition Rise or Fall Rate
TA
Operating Free-Air Temperature
Note:
—
VCC = 0.8V
—
-20
VCC = 1.1V
—
-1.1
VCC = 1.4V
—
-1.7
VCC = 1.65V
—
-1.9
VCC = 2.3V
—
-3.1
VCC = 3.0V
—
-4
VCC = 0.8V
—
20
VCC = 1.1V
—
1.1
VCC = 1.4V
—
1.7
VCC = 1.65V
—
1.9
VCC = 2.3V
—
3.1
VCC = 3.0V
—
4
VCC = 0.8V to 3.6V
—
mA
µA
mA
—
200
ns/V
-40
+125
°C
8. Unused inputs should be held at VCC or Ground.
74AUP2G08
Document number: DS36141 Rev. 1 - 2
3 of 9
www.diodes.com
January 2015
© Diodes Incorporated
74AUP2G08
Electrical Characteristics
Symbol
NEW PRODUCT
VIH
VIL
VOH
Parameter
Test Conditions
—
0.8V to 1.65V
1.65V to 1.95V
—
—
—
2.3V to 2.7V
3.0V to 3.6V
0.8V to 1.65V
0.65 X VCC
1.6
2.0
—
Low-Level Input
Voltage
—
1.65V to 1.95V
—
—
—
—
—
0.35 X VCC
0.7
0.9
IOH = -20μA
2.3V to 2.7V
3.0V to 3.6V
0.8V to 3.6V
VCC – 0.1
—
VCC – 0.1
IOH = -1.1mA
1.1V
0.75 X VCC
—
0.7 X VCC
—
IOH = -1.7mA
1.4V
1.11
—
1.03
—
High-Level Output IOH = -1.9mA
Voltage
IOH = -2.3mA
1.65V
1.32
—
1.3
—
2.05
—
1.97
—
IOH = -4mA
Low-Level Input
Voltage
∆IOFF
ICC
∆ICC
Power Down
Leakage Current
Delta Power
Down Leakage
Current
Supply Current
3V
0.30 X VCC
0.65 X VCC
1.6
2.0
—
—
—
—
—
—
—
V
0.30 X VCC
0.35 X VCC
0.7
0.9
—
1.9
—
1.85
—
2.72
—
2.67
—
2.6
—
2.55
—
—
0.1
—
0.1
0.3 X VCC
V
V
0.8V to 3.6V
IOL = 1.1mA
1.1V
—
0.3 X VCC
—
IOL = 1.7mA
1.4V
—
0.31
—
0.37
IOL = 1.9mA
1.65V
—
0.31
—
0.35
—
0.31
—
0.33
—
0.44
—
0.45
—
0.31
—
0.33
—
0.44
—
0.45
0V to 3.6V
—
± 0.1
—
± 0.5
µA
VI or VO = 0V to 3.6V
0V
—
± 0.2
—
± 0.6
µA
VI or VO = 0V to 3.6V
0V to 0.2V
—
± 0.2
—
± 0.6
µA
0.8V to 3.6V
—
0.5
—
0.9
µA
50
µA
IOL = 2.3mA
IOL = 2.7mA
Input Current
2.3V
—
—
—
Unit
IOL = 20μA
IOL = 3.1mA
IOFF
TA = -40°C to +85°C
Min
Max
—
0.80 X VCC
—
IOH = -2.7mA
II
TA = +25°C
Min
Max
—
0.80 X VCC
High-Level Input
Voltage
IOH = -3.1mA
VOL
VCC
IOL = 4mA
A or B Input
VI = GND to 3.6V
VI = GND or VCC, IO = 0
One Input at VCC –0.6V
Additional Supply
Other Inputs at VCC or
Current
GND
74AUP2G08
Document number: DS36141 Rev. 1 - 2
2.3V
3V
V
—
3.3V
—
4 of 9
www.diodes.com
40
January 2015
© Diodes Incorporated
74AUP2G08
Electrical Characteristics (cont.)
Symbol
NEW PRODUCT
VIH
VIL
VOH
Parameter
Test Conditions
High-Level Input Voltage
0.8V to 1.65V
0.80 X VCC
—
—
1.65V to 1.95V
0.70 X VCC
—
—
—
2.3V to 2.7V
3.0V to 3.6V
1.6
2.0
—
—
—
—
0.25 X VCC
1.65V to 1.95V
—
0.30 X VCC
—
—
2.3V to 2.7V
3.0V to 3.6V
—
—
0.7
0.9
IOH = -20μA
0.8V to 3.6V
VCC – 0.11
—
IOH = -1.1mA
1.1V
0.6 X VCC
—
IOH = -1.7mA
1.4V
0.93
—
IOH = -1.9mA
1.65V
1.17
—
1.77
—
1.67
—
2.40
—
2.3V
IOH = -2.7mA
3V
IOH = -4mA
0.8V to 3.6V
—
0.11
IOL = 1.1mA
1.1V
—
0.33 X VCC
IOL = 1.7mA
1.4V
—
0.41
IOL = 1.9mA
1.65V
—
0.39
—
0.36
—
0.50
—
0.36
IOL = 2.3mA
2.3V
IOL = 2.7mA
3V
IOL = 4mA
IOFF
∆IOFF
ICC
∆ICC
—
V
V
IOL = 20μA
IOL = 3.1mA
II
2.30
Unit
V
0.8V to 1.65V
IOH = -2.3mA
Low-Level Input Voltage
Max
—
IOH = -3.1mA
VOL
Min
—
Low-Level Input Voltage
High-Level Output Voltage
TA = -40°C to +125°C
VCC
V
—
0.50
0V to 3.6V
—
± 0.75
μA
Input Current
A or B Input, VI = GND to 3.6V
Power Down Leakage Current
VI or VO = 0V to 3.6V
0V
—
± 1.0
μA
Delta Power Down Leakage Current
VI or VO = 0V to 3.6V
0V to 0.2V
—
± 2.5
μA
Supply Current
VI = GND or VCC, IO = 0
0.8V to 3.6V
—
3.0
μA
Additional Supply Current
Input at VCC –0.6V Other Inputs
at VCC or GND
3.3V
—
75
μA
Operating and Package Characteristics (@TA = +25°C, unless otherwise specified.)
Parameter
VCC
Typ
Unit
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
5.1
5.2
5.2
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
5.5
5.7
6.0
0V or 3.3V
2.0
pF
Power Dissipation
Capacitance
f = 1MHz
No Load
Ci
Input Capacitance
Vi = VCC or GND
θJA
Thermal Resistance
Junction-to-Ambient
X2-DFN1210-8
(Note 9)
—
+395
°C/W
θJC
Thermal Resistance
Junction-to-Case
X2-DFN1210-8
(Note 9)
—
+236
°C/W
Cpd
Note:
Test
Conditions
pF
9. Test condition, X2-DFN1210-8 device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
74AUP2G08
Document number: DS36141 Rev. 1 - 2
5 of 9
www.diodes.com
January 2015
© Diodes Incorporated
74AUP2G08
Switching Characteristics
CL = 5pF, See Figure 1
Parameter
NEW PRODUCT
tpd
From
Input
A or B
To
Output
VCC
Y
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
To
Output
VCC
Y
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
To
Output
VCC
Y
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
To
Output
VCC
Y
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
Min
—
2.6
1.6
1.3
1.1
1.0
TA = +25°C
Typ
19.6
5.1
3.7
3.0
2.4
2.2
Max
—
11.9
6.5
5.2
4.0
3.5
TA = -40°C to +85°C
Min
Max
—
—
2.1
12.9
1.5
7.5
1.3
6.1
1.0
4.8
0.9
4.3
TA = -40°C to +125°C
Min
Max
—
—
2.1
14.2
1.5
8.3
1.3
6.7
1.0
5.3
0.9
4.8
Min
—
2.4
2.0
1.7
1.4
1.3
TA = +25°C
Typ
23.7
6.0
4.3
3.6
2.9
2.7
Max
—
13.8
7.6
6.1
4.8
4.2
TA = -40°C to +85°C
Min
Max
—
—
2.2
15.0
1.8
8.9
1.6
7.2
1.3
5.7
1.2
4.7
TA = -40°C to +125°C
Min
Max
—
—
2.2
16.5
1.8
9.8
1.6
7.9
1.3
6.3
1.2
5.2
Min
—
3.4
2.3
1.9
1.7
1.4
TA = +25°C
Typ
27.7
6.8
4.9
4.0
3.4
3.1
Max
—
15.6
8.6
6.9
5.5
4.8
TA = -40°C to +85°C
Min
Max
—
—
3.1
19.3
2.1
10.1
1.8
8.2
1.6
6.5
1.4
5.9
TA = -40°C to +125°C
Min
Max
—
—
3.1
19.5
2.1
11.2
1.8
9.0
1.6
7.2
1.4
6.5
Min
—
4.6
3.4
2.6
2.3
1.9
TA = +25°C
Typ
39.6
9.1
6.4
5.3
4.5
4.2
Max
—
21.3
11.5
9.1
7.2
6.2
TA = -40°C to +85°C
Min
Max
—
—
4.1
26.8
2.9
13.6
2.4
10.9
2.2
8.6
1.8
7.5
TA = -40°C to +125°C
Min
Max
—
—
4.1
27.0
2.9
15.0
2.4
12.1
2.2
9.5
1.8
8.3
Unit
ns
CL = 10pF, See Figure 1
Parameter
tpd
From
Input
A or B
Unit
ns
CL = 15pF, See Figure 1
Parameter
tpd
From
Input
A or B
Unit
ns
CL = 30pF, See Figure 1
Parameter
tpd
From
Input
A or B
74AUP2G08
Document number: DS36141 Rev. 1 - 2
6 of 9
www.diodes.com
Unit
ns
January 2015
© Diodes Incorporated
74AUP2G08
Parameter Measurement Information
From Output
Under Test
CL
R L=1MΩ
NEW PRODUCT
(see Note A)
VCC
Inputs
VM
CL
0.8V
VCC
tr/tf
≤3ns
VCC/2
5, 10, 15, 30pF
1.2V ± 0.1V
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
1.8V ± 0.15V
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
2.5V ± 0.2V
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
3.3V ± 0.3V
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
1.5V ± 0.1V
VI
Voltage Waveform Pulse Duration
Voltage Waveform Propagation Delay Times
Inverting and Non Inverting Outputs
Figure 1 Load Circuit and Voltage Waveforms
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz.
C. Inputs are measured separately one transition per measurement.
D. tPLH and tPHL are the same as tPD.
74AUP2G08
Document number: DS36141 Rev. 1 - 2
7 of 9
www.diodes.com
January 2015
© Diodes Incorporated
74AUP2G08
Marking Information
X2-DFN1210-8
( Top View )
xx
NEW PRODUCT
YWX
X2-DFN1210-8
XX : Identification Code
Y : Year : 0~9
W : week : A~Z : 1~26 week
a~z: 27-52 week
z represents 52 and 53 week
X : week : A~Z : Internal code
Part Number
Package
Identification Code
74AUP2G08RA3-7
X2-DFN1210-8
CT
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
X2-DFN1210-8
1
A
A
Seating Plane
D
︵
X
4
Z
e
(Pin #1 ID)
C0.5X45°
︶
X
4
1
Z
1
L
︵
︶
Dim
Min
Max
Typ
A
-
0.35
0.30
A1
0
0.03
0.02
b
0.10
0.20
0.15
D
1.15
1.25
1.20
E
0.95
1.05
1.00
e
-
-
0.30
0.25
K
1
K
E
K
-
-
K1
-
-
0.20
L
0.25
0.35
0.30
L1
0.30
0.40
0.35
Z
0.050 0.100 0.075
Z1
0.050 0.100 0.075
x
7
L
All Dimensions in mm
b
︵ ︶
1
X
G
2
Y
Y
Document number: DS36141 Rev. 1 - 2
X
C
74AUP2G08
8 of 9
www.diodes.com
Dimensions
Value
(in mm)
C
0.300
G
0.150
X
0.150
X1
1.050
Y
0.500
Y1
1.150
January 2015
© Diodes Incorporated
74AUP2G08
IMPORTANT NOTICE
NEW PRODUCT
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall
assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes
Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales
channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify
and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and
markings noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is
the final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the
express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for
use provided in the labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems,
and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systemsrelated information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and
its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or
systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
74AUP2G08
Document number: DS36141 Rev. 1 - 2
9 of 9
www.diodes.com
January 2015
© Diodes Incorporated