ZXTR2005K

A Product Line of
Diodes Incorporated
ZXTR2005K
100V INPUT, 5V 50mA REGULATOR TRANSISTOR
Description
Features
The ZXTR2005K monolithically integrates a transistor, Zener diode

Series Linear Regulator Using Emitter-Follower Stage
and resistor to function as a high voltage linear regulator. The device

Input Voltage = 10 to 100V
regulates with a 5V nominal output at 15mA. It is designed for use in

Output Voltage = 5V ± 10%
high voltage applications where standard linear regulators cannot be

Fully Integrated Into a TO252 Package
used. This function is fully integrated into a TO252 package,

Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
minimizing PCB area and reducing number of components when

Halogen and Antimony Free. “Green” Device (Note 3)
compared with a multi-chip discrete solution.

Qualified to AEC-Q101 Standards for High Reliability
Applications
Mechanical Data
Supply voltage regulation in:

 Networking

Case: TO252 (DPAK)
Case Material: Molded Plastic. “Green” Molding Compound
UL Flammability Rating 94V-0
 Telecom

 Power Over Ethernet (PoE)

Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish - Matte Tin Plated Leads, Solderable per
MIL-STD-202, Method 208

Weight: 0.34 grams (approximate)
TO252 (DPAK)
Pin Name
VIN
GND
VOUT
Top View
Top View
Pin-Out
Pin Function
Input Supply
Power Ground
Voltage Output
Top View
Pin-Out
Ordering Information (Note 4)
Product
ZXTR2005K-13
Notes:
Package
TO252 (DPAK)
Marking
ZXTR 2005
Reel size (inches)
13
Tape width (mm)
16
Quantity per reel
2,500
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen and Antimony free,"Green"
and Lead-Free.
3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
ZXTR
2005
YYWW
ZXTR2005K
Document number: DS36328 Rev. 2 - 2
ZXTR 2005 = Product Type Marking Code
YYWW = Date Code Marking
YY = Last Digit of Year, (ex: 13 = 2013)
WW = Week Code 01 - 52
1 of 7
www.diodes.com
December 2013
© Diodes Incorporated
A Product Line of
Diodes Incorporated
ZXTR2005K
Absolute Maximum Ratings (Voltage relative to GND, @TA = +25°C, unless otherwise specified.)
Characteristic
Symbol
Value
Unit
VIN
-0.3 to 100
V
Continuous Input & Output Current
IIN, IOUT
450
mA
Peak Pulsed Input & Output Current
IIM, IOM
2
A
VOUT(max)
11
V
Symbol
Value
Unit
IOUT
50
mA
IOM
830
170
mA
Input Voltage
Maximum Voltage applied to VOUT
Maximum Current at VIN = 48V (@TA = +25°C, unless otherwise specified.)
Characteristic
Continuous Output Current
(Note 7)
Pulsed Output Current
(Note 8)
(Note 9)
Thermal Characteristics
Characteristic
Symbol
(Note 5)
Power Dissipation
(Note 6)
(Note 5)
Thermal Resistance, Junction to Ambient
(Note 6)
Thermal Resistance, Junction to Lead
(Note 10)
Thermal Resistance, Junction to Case
(Note 10)
Recommended Operating Junction Temperature Range
Maximum Operating Junction and Storage Temperature Range
Value
2.3
1.1
44
90
8.4
14.6
-40 to +125
-65 to +150
PD
RθJA
RθJL
RθJC
TJ
TJ, TSTG
Unit
W
°C/W
°C
°C
ESD Ratings (Note 11)
Characteristics
Electrostatic Discharge – Human Body Model
Electrostatic Discharge – Machine Model
Notes:
Symbols
ESD HBM
ESD MM
Value
4,000
400
Unit
V
V
JEDEC Class
3A
C
5. For a device mounted with the exposed VIN pad on 50mm x 50mm 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still
air conditions whilst operating in steady-state.
6. Same as note 5, except mounted on 15mm x 15mm 1oz copper.
7. Same as note 5, whilst operating at VIN = 48V. Refer to Safe Operating Area for other Input Voltages.
8. Same as note 5, except measured with a single pulse width = 100µs and VIN = 48V.
9. Same as note 5, except measured with a single pulse width = 10ms and VIN = 48V.
10. RθJL = Thermal resistance from junction to solder-point (on the exposed VIN pad).
RθJC = Thermal resistance from junction to the top of case.
11. Refer to JEDEC specification JESD22-A114 and JESD22-A115.
ZXTR2005K
Document number: DS36328 Rev. 2 - 2
2 of 7
www.diodes.com
December 2013
© Diodes Incorporated
A Product Line of
Diodes Incorporated
ZXTR2005K
3.0
TJ
= 125°C
= 150°C
2.5
2.0
50mm x 50mm
1oz Cu
1.5
1.0
0.5
0.0
15mm x 15mm
1oz Cu
0
25
50
75
100
125
150
Ambient Temperature (°C)
Continuous Output Current (mA)
Max Power Dissipation (W)
Thermal Characteristics and Derating Information
Steady state D.C.
TA = 25°C
TJ  125°C
100
50mm x 50mm
1oz Cu
10
10
D=0.5
30
20
Max Power Dissipation (W)
Thermal Resistance (°C/W)
50mm x 50mm
1oz Cu
D=0.2
Single Pulse
D=0.05
10
D=0.1
0
100µ 1m 10m 100m
1
10
Pulse Width (s)
100
1k
10k
Document number: DS36328 Rev. 2 - 2
30
40
50
60
70
80
90 100
Safe Operating Area
100
Single Pulse
TA = 25°C
TJ  125°C
50mm x 50mm
1oz Cu
10
1
100µ
1m
10m 100m
1
10
100
1k
Pulse Width (s)
Transient Thermal Impedance
ZXTR2005K
20
Input Voltage (V)
Derating Curve
40
15mm x 15mm
1oz Cu
Pulse Power Dissipation
3 of 7
www.diodes.com
December 2013
© Diodes Incorporated
A Product Line of
Diodes Incorporated
ZXTR2005K
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Characteristic
Symbol
Min
Typ
Max
Unit
VOUT
4.5
5.0
5.5
V
∆VOUT
—
195
300
mV
∆VOUT/∆T
—
7.0
—
mV/°C
Load Regulation (Notes 12 & 14)
∆VOUT
—
-185
-205
-350
-400
mV
Minimum Value of Input Voltage Required to
Maintain Line Regulation
VIN(MIN)
10
—
—
V
—
IQ
—
—
260
550
500
900
µA
VIN = 48V, IOUT = 10µA
VIN = 100V, IOUT = 10µA
Vin/Vout
—
45
—
dB
COUT = 100nF, IOUT = 15mA,
VOUT = 5V, VIN = 10 to 100V, f = 100Hz
Output Voltage (Note 12)
Line Regulation (Notes 12 & 13)
Temperature Coefficient
Quiescent Current
Power Supply Rejection Ratio
Notes:
Test Condition
VIN = 48V, IOUT = 15mA
VIN = 10 to 72V, IOUT = 15mA
TJ = -40°C to +125°C
VIN = 48V, IOUT = 15mA
IOUT = 0.1 to 30mA, VIN = 48V
IOUT = 0.1 to 100mA, VIN = 48V
12. Measured under pulsed conditions. Pulse width ≤ 300μs. Duty cycle ≤ 2%.
13. Line regulation
∆VOUT = VOUT(@ VIN = 72V) – VOUT(@ VIN = 10V)
14. Load regulation
∆VOUT = VOUT(@ IOUT = 30mA) – VOUT(@ IOUT = 0.1mA)
∆VOUT = VOUT(@ IOUT = 100mA) – VOUT(@ IOUT = 0.1mA)
Typical Application Circuit
Pin Functions
Pin Name
Pin Function
VIN
Input Supply
GND
Power Ground
VOUT
Voltage Output
ZXTR2005K
Document number: DS36328 Rev. 2 - 2
Notes
To maintain output regulation the input voltage can vary from 10V to 100V with respect to the GND pin. It is
recommended to connect a 1µF capacitor to GND.
This pin should be tied to the system ground.
Outputs a regulated 5V. It is recommended to connect a 10µF capacitor to GND. Minimum of 10µA must be
drawn from VOUT to maintain regulation. The pin can be pulled high to a maximum of 11V with respect to
ground.
4 of 7
www.diodes.com
December 2013
© Diodes Incorporated
A Product Line of
Diodes Incorporated
ZXTR2005K
70
VOUT
60
50
VIN
40
30
20
10
-5µ
0
5µ
10µ
Time (s)
5.2
5.1
5.0
4.9
4.8
VIN =18 to 48V
4.7
IOUT= 15mA
4.6
Slew Rate=5V/s
4.5
COUT = 100nF
4.4
4.3
4.2
15µ
20µ
5.6
80
5.4
70
5.2
50
5.0
4.8
Slew Rate=1A/s
COUT = 100nF
VIN =10V
4.6
4.4
IOUT
4.2
4.0
-4µ
400
T J = 125°C
200
T J = 85°C
T J = 100°C
T J = 25°C
0
-200
T J = -40°C
-400
-600
10
20
30
40
50
60
70
80
0
2µ
4µ
6µ
90 100
VIN = 48V
600
8µ
0
10µ
T J = 125°C
400
T J = 100°C
200
T J = 85°C
0
-200
-400
T J = 25°C
T J = -40°C
-600
0.1
20
40
60
80
100
IOUT Output Current (mA)
VIN Input Voltage (V)
Load Regulation (Note 16)
700
800
VIN = 48V
600
IQ Quiescent Current (A)
VOUT Output Voltage (mV)
10
800
Line Regulation (Note 15)
Notes:
20
Time (s)
VOUT Output Voltage (mV)
VOUT Output Voltage (mV)
600
-2µ
30
Load transient response
IOUT = 15mA
800
40
IOUT = 0 to 30mA
Line transient response
1000
60
VOUT
IOUT Output Current (mA)
VIN Input Voltage (V)
80
VOUT Output Voltage (V)
Typical Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
600
IOUT = 15mA
400
IOUT = 10µA
T J = 100°C
500
T J = 125°C
T J = 85°C
400
200
300
0
T J = 25°C
T J = -40°C
200
-200
100
-400
-600
-40 -25
0
25
50
75
100
125
0
10
20
30
40
50
60
70
80
Junction temperature (°C)
VIN Input Voltage (V)
Temperature Coefficient (Note 17)
Quiescent Current
90 100
15. Line regulation ∆VOUT = VOUT – VOUT(@ VIN = 10V, IOUT = 15mA, TJ = +25°C)
16. Load regulation ∆VOUT = VOUT – VOUT(@ VIN = 48V, IOUT = 0.1mA, TJ = +25°C)
17. Temperature Coefficient ∆VOUT = VOUT – VOUT(@ VIN = 48V, IOUT = 15mA, TJ = +25°C)
ZXTR2005K
Document number: DS36328 Rev. 2 - 2
5 of 7
www.diodes.com
December 2013
© Diodes Incorporated
A Product Line of
Diodes Incorporated
ZXTR2005K
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
E
TO252
Dim Min Max Typ
A 2.19 2.39 2.29
A1 0.00 0.13 0.08
A2 0.97 1.17 1.07
b
0.64 0.88 0.783
b2 0.76 1.14 0.95
b3 5.21 5.46 5.33
c2 0.45 0.58 0.531
D 6.00 6.20 6.10
D1 5.21


e
2.286


E 6.45 6.70 6.58
E1 4.32


H 9.40 10.41 9.91
L
1.40 1.78 1.59
L3 0.88 1.27 1.08
L4 0.64 1.02 0.83
a
0°
10°

All Dimensions in mm
A
b3
c2
L3
A2
D
E1
H
L4
A1
L
e
2X b2
3X b
a
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
X2
Y2
C
Y1
X1
ZXTR2005K
Document number: DS36328 Rev. 2 - 2
Z
Dimensions
Z
X1
X2
Y1
Y2
C
E1
Value (in mm)
11.6
1.5
7.0
2.5
7.0
6.9
2.3
E1
6 of 7
www.diodes.com
December 2013
© Diodes Incorporated
A Product Line of
Diodes Incorporated
ZXTR2005K
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2013, Diodes Incorporated
www.diodes.com
ZXTR2005K
Document number: DS36328 Rev. 2 - 2
7 of 7
www.diodes.com
December 2013
© Diodes Incorporated