Ionizer (Digital Bar Type) ZJ-BAS CSM_ZJ-BAS_DS_E_2_2 The highest level of ionization in its class. • Sensing and variable-AC system provides fast and meticulous ionization. • Linked Ionizers cover a wide area without causing uneven ionization. • Digital ion display provides simple and reliable settings. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Refer to Safety Precautions on page 4. System Configuration Ionizer ZJ-BAS I/O Cable ZJ-BAS-FC Used for connecting external devices. Power supply cable Select from the two available types. Cable with Connector on One End Cable with Connectors on Both Ends ZJ-BAS-MC@@A ZJ-BAS-MC@@B Used when using a DC power supply. Used when using an AC adapter. AC Adapter ZJ-BAS-PS01 Special Remote Control Remote Control ZJ-BAS-R01 When Linking Ionizers UP EXIT Linking Bracket Set ZJ9-BAS-L01 Enter DOWN Remote Control Receiver ZJ-BAS-R02 Power Supply Cable (for linking Ionizers) ZJ-BAS-MC@@RB The length of the cables that can be linked depends on the number of Ionizers to be linked together. Contact your OMRON sales representative for details. 1 ZJ-BAS Ordering Information Ionizer Appearance Total length 370 mm Effective length 500 mm 450 mm 580 mm 610 mm 740 mm 770 mm 900 mm 1,170 mm 1,300 mm 1,410 mm 1,540 mm Model ZJ-BAS050 ZJ-BAS058 ZJ-BAS074 ZJ-BAS090 ZJ-BAS130 ZJ-BAS154 Power Supply Cable Appearance Type Cable length 2m 5m Cable with Connector on One End (one ferrite core provided, 30-dia × 39 mm) 10 m 15 m 20 m 2m 5m Cable with Connectors on Both Ends (one ferrite core provided, 30-dia × 39 mm) 10 m 15 m 20 m 710 mm 790 mm Used for connecting Ionizers 950 mm 1,110 mm 1,510 mm 1,750 mm Model ZJ-BAS-MC02A ZJ-BAS-MC05A ZJ-BAS-MC10A ZJ-BAS-MC15A ZJ-BAS-MC20A ZJ-BAS-MC02B ZJ-BAS-MC05B ZJ-BAS-MC10B ZJ-BAS-MC15B ZJ-BAS-MC20B ZJ-BAS-MC07RB ZJ-BAS-MC08RB ZJ-BAS-MC09RB ZJ-BAS-MC11RB ZJ-BAS-MC15RB ZJ-BAS-MC17RB I/O Cable Appearance Cable length 2m Model 20 m ZJ-BAS-FC02A ZJ-BAS-FC05A ZJ-BAS-FC10A ZJ-BAS-FC15A ZJ-BAS-FC20A Specifications Model 5m 10 m 15 m AC Adapter Appearance Input: 100 to 240 VAC Output: 24 VDC × 2 ZJ-BAS-PS01 Special Remote Control Appearance Type Model Remote Control ZJ-BAS-R01 Remote Control Receiver (Receiver, USB cable, bracket) ZJ-BAS-R02 Linking Bracket Set Appearance Contents Linking Bracket (1) 6-dia. Elbow Air Joint (×2) Model ZJ9-BAS-L01 2 ZJ-BAS Discharge Electrode Module Appearance Quantity Model Set of 5 ZJ9-BAS-NT105 Set of 10 ZJ9-BAS-NT110 Ratings and Specifications Ionizer Item Model ZJ-BAS050 ZJ-BAS058 ZJ-BAS074 ZJ-BAS090 ZJ-BAS130 ZJ-BAS154 Ionizer length (mm) 370 450 610 770 1,170 1,410 Effective ionization length (mm) *1 500 580 740 900 1,300 1,540 Power supply voltage 24 VDC ±10%, ripple (p-p) 10% max. Current consumption 520 mA max. (discharge frequency 0.08 to 0.5 Hz: 400 mA (typical), 1 to 10 Hz: 350 mA (typical), 20 to 40 Hz: 300 mA (typical)) Discharge method Sensing and a Variable-AC System Discharge voltage 6.5 kV P-P Discharge electrode Tungsten electrode Recommended installation distance 50 to 2,000 mm Ion balance *2 ±30 V max. Power supply connector Modular type, 8-pin connector (at both ends of Unit) Air inlet 6-dia one-touch coupling (at both ends of Unit) Maximum air pressure External I/O 0.3 MPa max. Input Discharge stop input (Turns ON at 12 to 24 VDC), input impedance: 8.2 kΩ Output Discharge stop output, cleaning output, alarm output, high-pressure error output: Signal output from photo MOS relay (100 mA max at 24 VDC) Display Seven-segment LED display ID number 001 to 050 Ion balance adjustment function Yes Maximum number of linkable units 7 Units Material Ionizer: ABS-resin, facing electrodes: Stainless steel Ambient temperature range Operating: 10 to 40°C, Storage: 0 to 40°C (with no icing or condensation) Ambient humidity range Operating: 35% to 65%, Storage: 35% to 85% (with no condensation) Weight (Ionizer only) Approx. 0.58 kg Approx. 0.64 kg Approx. 0.8 kg Accessories Two mounting brackets, two M4 screws, instruction manual Approx. 0.94 kg Approx. 1.28 kg Approx. 1.5 kg Two mounting brackets, two M4 screws, 1 medium bracket, instruction manual *1. Measurement conditions Installation distance: 50 mm Airflow: 1 L /min per hole Frequency: 10 Hz Charge plate monitor: 150 × 150 mm, 20 pF Ionization time: (1,000 V→100V/-1,000V→-100V): 1 s max.) *2. Measurement conditions Installation distance: 300 mm Airflow: 1 L /min per hole Frequency: 10 Hz Charge plate monitor: 150 × 150 mm, 20 pF AC Adapter Special Remote Control Item Model ZJ-BAS-PS01 Input voltage 100 to 240 VAC Input current 1.2 A max. Output voltage 24 VDC Output current 3.75 A max. Number of output ports 2 ports Product configuration Adapter box, AC adapter AC power cable Weight (without package) Adapter box: Approx. 30 g AC Adapter: Approx. 475 g AC power supply cable: Approx. 260 g Item Model ZJ-BAS-R01 ZJ-BAS-R02 Product configuration Remote Control only Receiver Cable (150 mm) Brackets (not including Remote Control) Communications method Infrared communications Number of detectable Units 50 Units Power supply Three AAA batteries Supplied from the ZJ-BAS Ionizer Weight (not including packaging) Approx. 115 g Receiver: Approx. 5 g Cable: Approx. 6 g Bracket: Approx. 5 g Accessories Instruction manual - 3 ZJ-BAS Engineering Data (Reference Value) Relationship of Air Pressure and Installation Distance to Ionization Time Bar Length vs. Air Pressure and Airflow 350 20 Airflow (L/min nor) 300 Ionization time (s) 15 0.05 MPa 0.1 MPa 0.2 MPa 0.3 MPa 10 250 BAS050 BAS058 BAS074 BAS090 BAS130 BAS154 200 150 100 5 50 0 0 50 100 200 300 0.05 600 1000 1500 Installation distance (mm) 0.1 0.2 0.3 Air pressure (MPa) Ionization time (s) Ionization Time for Each Ionization Area With installation distance of 50 mm (reference value) 1 0.8 0.6 0.4 0.2 0 -400 -300 -200 -100 0 100 200 300 400 Ionization area (mm) Measuring conditions: Model: ZJ-BAS050 Installation distance: 50 mm Air pressure: 0.3 MPa Frequency: 10 Hz Charge plate monitor: 150 mm × 150 mm, 20 pF Ionization time: ±1,000 V to ±100 V Ionization time (s) With installation distance of 1,500 mm (reference value) 10 8 6 4 2 -400 -300 -200 -100 0 100 200 Ionization area (mm) 300 400 Measuring conditions: Model: ZJ-BAS050 Installation distance: 1,500 mm Air pressure: 0.3 MPa Frequency: 10 Hz Charge plate monitor: 150 mm × 150 mm, 20 pF Ionization time: ±1,000 V to ±100 V Safety Precautions WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Precaution for Correct Use Do not use the product in atmospheres or environments that exceed product ratings. This document provides information mainly for selecting suitable models. Information such as the usage precautions is not contained herein. Be sure to read the instruction manual before using the product. For technical information and product FAQs, refer to the Technical Guide on your OMRON website. 4 ZJ-BAS (Unit: mm) Dimensions Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified. Ionizer The dimensions and number of Discharge Electrode Modules for each model are shown in the following table. Model 15 4.4 C B 32.4 (34) Display 60.7 (4) 25 A Mounting bracket B (mm) C (mm) ZJ-BAS050 370 394 416 5 ZJ-BAS058 450 474 496 6 ZJ-BAS074 610 634 656 8 ZJ-BAS090 770 794 816 10 ZJ-BAS130 1,170 1,194 1,216 15 ZJ-BAS154 1,410 1,434 1,456 18 Auxiliary mounting bracket Provided with the ZJ-BAS130/BAS154 25 80 Discharge Electrode Module A (mm) 66 50 15 20 4.2 4.4 16 4-R2.1 22.5 33 20 27 47 4.2 44.5 52.5 54.2 45° 3.5 Eight, 3.2-dia. holes 10 dia. 39 R8 4.2 dia. 50 Power Supply Cable ZJ-BAS-MC@@A 23 ZJ-BAS-MC@@B/MC@@RB L* 50 (9) L* (9) 12 12 L*: 2 m/5 m/10 m/15 m/20 m 22.5 22.5 8 L*: ZJ-BAS-MC@@B : 2 m/5 m/10 m/15 m/20 m ZJ-BAS-MC@@RB : 710 mm/790 mm/950 mm/1110 mm/1510 mm/1750 mm 8 I/O Cable ZJ-BAS-FC@@A 7.5 (25) 4.5 dia. L* 45 4 dia. 10.8 L*: 2 m/5 m/10 m/15 m/20 m AC Adapter (Adapter box) ZJ-BAS-PS01 39.5 25.6 43.5 5 ZJ-BAS Remote Control ZJ-BAS-R01 Receiver for the Remote Control (Bracket) ZJ-BAS-R02 30 70 37 27 19 175 Two, 3.2-dia. holes 33 15 14 27 (37.2) 60 20 Linking Bracket ZJ9-BAS-L01 15 92.5 15 Material: Stainless steel (SUS304) 3.75 4.4 16 130 2 10 85 52.5 44.5 45° 10 dia. R8 Eight, 3.2-dia. holes 4.2 dia. 6 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2016.2 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2016 All Right Reserved.